EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
95b0c07a61
Openwrt/target/linux/ath79/dts
History
Roger Pueyo Centelles 59c2f8af8c ath79: add support for COMFAST CF-E120A v3 
This patch adds support for the COMFAST CF-E120A v3, an outdoor wireless
CPE with two Ethernet ports and a 802.11an radio.

Specifications:

 - AR9344 SoC
 - 535/400/267 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, both with PoE-in support
 - 64 MB of RAM (DDR2)
 - 8 MB of FLASH
 - 2T2R 5 GHz, up to 25 dBm
 - 11 dBi built-in antenna
 - POWER/LAN/WAN/WLAN green LEDs
 - 4x RSSI LEDs (2x red, 2x green)
 - UART (115200 8N1) and GPIO (J9) headers on PCB

Flashing instructions:

 The original firmware is based on OpenWrt so a sysupgrade image can be
 installed via the stock web GUI. Settings from the original firmware
 will be saved and restored on the new one, so a factory reset will be
 needed. To do so, once the new firmware is flashed, enter into failsafe
 mode by pressing the reset button several times during the boot
 process, while while the WAN LED flashes, until it starts flashing
 faster. Once in failsafe mode, perform a factory reset as usual.

 The U-boot bootloader contains a recovery HTTP server to upload the
 firmware. Push the reset button while powering the device on and
 keep it pressed for >10 seconds. The recovery page will be at
 http://192.168.1.1

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2019-02-28 11:26:10 +01:00
..
ar724x.dtsi
ar934x.dtsi
ar1022_iodata_wn-ag300dgr.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7100.dtsi
ar7161_buffalo_wzr-hp-ag300h.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7161_dlink_dir-825-b1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7161_netgear_wndr3700.dts
ar7161_netgear_wndr3700.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7161_netgear_wndr3700v2.dts
ar7161_netgear_wndr3800.dts
ar7161_ubnt_routerstation-pro.dts
ar7161_ubnt_routerstation.dts
ar7161_ubnt_routerstation.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_buffalo_whr-g301n.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_netgear_wnr612-v2.dts
ar7240_netgear_wnr612-v2.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_on_n150r.dts
ar7240_tplink_tl-wr74xn-v1.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_tplink_tl-wr740n-v1.dts
ar7240_tplink_tl-wr740n-v3.dts
ar7240_tplink_tl-wr741-v1.dts
ar7240_tplink_tl-wr743nd-v1.dts
ar7240_tplink_tl-wr841-v5.dts
ar7240_tplink_tl-wr941-v4.dts
ar7240.dtsi
ar7241_tplink_tl-mr3x20.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3220-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3420-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr841-v7.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7241_tplink_tl-wr842n-v1.dts
ar7241_tplink.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7241_ubnt_airrouter.dts
ar7241_ubnt_bullet-m.dts
ar7241_ubnt_nano-m.dts
ar7241_ubnt_rocket-m.dts
ar7241_ubnt_unifi.dts
ar7241_ubnt_xm_outdoor.dtsi
ar7241_ubnt_xm.dtsi
ar7241.dtsi
ar7242_avm_fritz300e.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7242_buffalo_bhr-4grv.dts
ar7242_buffalo_wzr-bhr.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g450h.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7242_tplink_tl-wr2543-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7242.dtsi
ar9132_tplink_tl-wa901nd-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr941-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132.dtsi
ar9330_glinet_gl-ar150.dts ath79: fix boardname of GL.iNet GL-AR150 2018-12-31 14:05:26 +01:00
ar9330_pqi_air-pen.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9330.dtsi
ar9331_dptechnics_dpt-module.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_dragino_ms14.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_embeddedwireless_dorin.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_etactica_eg200.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_onion_omega.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_pisen_wmm003n.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-mr10u.dts
ar9331_tplink_tl-mr3020-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-mr3040-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-wr703n.dts
ar9331_tplink_tl-wr740n-v4.dts ath79: rename TL-WR740ND-v4 to TL-WR740N-v4 2019-02-14 16:56:14 +01:00
ar9331_tplink_tl-wr741nd-v4.dts
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331.dtsi
ar9341_pcs_cr3000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9341_tplink_tl-wr841-v8.dts ath79: add support for TP-Link TL-WR841N/ND v8 2018-12-31 13:28:31 +01:00
ar9341_tplink_tl-wr842n-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9341.dtsi
ar9342_iodata_etg3-r.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9342_ubnt_bullet-m-xw.dts ath79: ubnt-bullet-m-xw: Remove eth1 disabled node 2018-12-27 16:02:25 +01:00
ar9342_ubnt_lap-120.dts
ar9342_ubnt_nanostation-ac-loco.dts
ar9342_ubnt_nanostation-ac.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9342_ubnt_wa.dtsi
ar9342_ubnt_xw.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9344_comfast_cf-e120a-v3.dts ath79: add support for COMFAST CF-E120A v3 2019-02-28 11:26:10 +01:00
ar9344_dlink_dir-8x5.dtsi
ar9344_dlink_dir-825-c1.dts
ar9344_dlink_dir-835-a1.dts
ar9344_ocedo_raccoon.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_pcs_cap324.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_pcs_cr5000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_tplink_tl-wdr3600.dts
ar9344_tplink_tl-wdr4300.dts
ar9344_tplink_tl-wdr4300.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_wd_mynet-wifi-rangeextender.dts
ar9344_winchannel_wb2000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344.dtsi
ath79.dtsi
qca953x_tplink_tl-wr810n.dtsi ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca953x.dtsi ath79: fix wmac memory region for qca953x 2019-02-20 18:51:31 +01:00
qca956x.dtsi ath79: fix pinmux reg value for QCA956x 2018-12-24 19:18:07 +01:00
qca9531_engenius_ews511ap.dts ath79: add support for EnGenius EWS511AP 2018-12-31 16:25:09 +01:00
qca9531_glinet_gl-ar300m-nand.dts ath79: fix boardname of GL.iNet GL-AR300M 2018-12-31 14:24:21 +01:00
qca9531_glinet_gl-ar300m-nor.dts ath79: fix boardname of GL.iNet GL-AR300M 2018-12-31 14:24:21 +01:00
qca9531_glinet_gl-ar300m.dtsi ath79: fix GL.iNet AR300M family GPIOs/LEDs 2019-01-26 10:40:06 +01:00
qca9531_glinet_gl-x750.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9531_tplink_tl-wr810n-v1.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9533_comfast_cf-e110n-v2.dts ath79: add support for COMFAST CF-E110N 2018-12-31 16:25:11 +01:00
qca9533_tplink_tl-wr810n-v2.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr841-v9.dts
qca9533_tplink_tl-wr841-v11.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9533_tplink_tl-wr841.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9557_buffalo_bhr-4grv2.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
qca9557_iodata_wn-ac1167dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557.dtsi ath79: fix qca955x dual pci resource allocation 2019-02-14 16:56:15 +01:00
qca9558_devolo_dvl1xxx.dtsi ath79: add support for devolo WiFi pro 1200e 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200e.dts ath79: add support for devolo WiFi pro 1200e 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200i.dts ath79: add support for devolo WiFi pro 1200i 2019-01-05 21:55:22 +01:00
qca9558_devolo_dvl1750c.dts ath79: add support for devolo WiFi pro 1750c 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1750e.dts ath79: add support for Devolo WiFi Pro 1750e 2019-01-26 21:46:33 +01:00
qca9558_devolo_dvl1750i.dts ath79: add support for devolo WiFi pro 1750i 2019-01-05 21:55:22 +01:00
qca9558_ocedo_koala.dts ath79: fix OCEDO Koala ethernet configuration 2018-12-30 20:08:13 +01:00
qca9558_openmesh_om5p-ac-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c7-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c7-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c7.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wdr4900-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts
qca9558_tplink_tl-wr1043nd-v3.dts
qca9558_tplink_tl-wr1043nd.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9561_avm_fritz4020.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9561_tplink_archer-c5x.dtsi
qca9561_tplink_archer-c58-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c59-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_xiaomi_mi-router-4q.dts ath79: add support for Xiaomi Mi Router 4Q 2019-02-11 19:04:06 +01:00
qca9563_dlink_dir-859-a1.dts ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: add support for ELECOM WRC-1750GHBK2-I/C 2018-12-31 21:38:53 +09:00
qca9563_elecom_wrc-1750ghbk2-i.dts ath79: add support for ELECOM WRC-1750GHBK2-I/C 2018-12-31 21:38:53 +09:00
qca9563_elecom_wrc-ghbk2-i.dtsi ath79: add support for ELECOM WRC-1750GHBK2-I/C 2018-12-31 21:38:53 +09:00
qca9563_glinet_gl-ar750s.dts ath79: align GL-AR750S boardname to other GL.iNet devices 2019-01-01 19:42:41 +01:00
qca9563_nec_wg800hp.dts ath79: add support for NEC Aterm WG800HP 2018-12-24 19:18:07 +01:00
qca9563_phicomm_k2t.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_rosinson_wr818.dts ath79: tweak the position of factory partition for wr818 2018-12-31 16:37:09 +01:00
qca9563_tplink_archer-a7-v5.dts ath79: add support for TP-Link Archer A7 2018-12-17 08:09:13 +01:00
qca9563_tplink_archer-c2-v3.dts ath79: add support for TP-Link Archer C2 V3 (AC900) 2019-01-27 16:41:10 +01:00
qca9563_tplink_archer-c6-v2.dts ath79: add support for TP-Link Archer C6 v2 2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-c7-v4.dts ath79: add support for TP-LINK Archer C7 v4 2019-02-05 19:37:31 +01:00
qca9563_tplink_archer-c7-v5.dts ath79: add support for TP-Link Archer C7 v5 2018-12-27 14:06:38 +01:00
qca9563_tplink_archer-x6-v2.dtsi ath79: add support for TP-Link Archer C6 v2 2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-x7-v5.dtsi ath79: dts: Remove newly added default-state=off property 2018-12-17 14:22:28 +01:00
qca9563_tplink_re450-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_tplink_tl-wr1043n.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_tplink_tl-wr1043nd-v4.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_ubnt_unifiac-lite.dts
qca9563_ubnt_unifiac-lite.dtsi
qca9563_ubnt_unifiac-mesh-pro.dts
qca9563_ubnt_unifiac-mesh.dts
qca9563_ubnt_unifiac-pro.dts
qca9563_ubnt_unifiac-pro.dtsi
qca9563_ubnt_unifiac.dtsi ath79: Fix UBNT Unifi AC LEDs 2018-12-31 13:28:31 +01:00