e58e49bdbe
Samsung WAM250 is a dual-band (selectable, not simultaneous) wireless
hub, dedicated for Samsung Shape Wireless Audio System. The device is
based on Atheros AR9344. FCC ID: A3LWAM250.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet
- 2T2R 2.4/5 GHz (AR9344), with ext. PA (SE2598L, SE5003L) and LNA
- 1x USB 2.0
- 4x LED (all are driven by GPIO)
- 2x button (reset, wps/speaker add)
- DC jack for main power input (14 V)
- UART header on PCB (J4, RX: 3, TX: 5)
Flash instruction:
This device uses dual-image (switched between upgrades) with a common
jffs2 config partition. Fortunately, there is a way to disable this mode
so that more flash space can be used by OpenWrt image.
You can easily access this device over telnet, using root/root
credentials (the same also work for serial console access).
1. Make sure that your device uses second (bootpart=2) image using
command: "fw_printenv bootpart".
2. If your device uses first image (bootpart=1), perform upgrade to the
latest vendor firmware (after the update, device should boot from
second partition) using web gui (default login: admin/1234567890).
3. Rename "sysupgrade" image to "firmware.bin", download it (you can use
wget, tftp or ftpget) to "/tmp" and issue below commands:
mtd_debug erase /dev/mtd3 0 $(wc -c /tmp/firmware.bin | awk -F' ' '{print $1}')
mtd_debug write /dev/mtd3 0 $(wc -c /tmp/firmware.bin)
fw_setenv bootpart
fw_setenv bootcmd "bootm 0x9f070000"
reboot
Revert to vendor firmware instruction:
1. Download vendor firmware to "/tmp" device and issue below commands:
fw_setenv bootpart 1
sysupgrade -n -F SS_BHUB_v2.2.05.bin
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
123 lines
3.1 KiB
C
123 lines
3.1 KiB
C
/*
|
|
* Samsung WAM250 board support
|
|
*
|
|
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define WAM250_GPIO_LED_LAN 13
|
|
#define WAM250_GPIO_LED_POWER 15
|
|
#define WAM250_GPIO_LED_REPEATER 14
|
|
#define WAM250_GPIO_LED_WLAN 12
|
|
|
|
#define WAM250_GPIO_BTN_RESET 17
|
|
#define WAM250_GPIO_BTN_SPKADD 1
|
|
|
|
#define WAM250_GPIO_EXT_LNA 19
|
|
|
|
#define WAM250_MAC_OFFSET 2
|
|
|
|
#define WAM250_KEYS_POLL_INTERVAL 20
|
|
#define WAM250_KEYS_DEBOUNCE_INTERVAL (3 * WAM250_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led wam250_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "wam250:white:lan",
|
|
.gpio = WAM250_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "wam250:white:power",
|
|
.gpio = WAM250_GPIO_LED_POWER,
|
|
.default_state = LEDS_GPIO_DEFSTATE_KEEP,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "wam250:white:repeater",
|
|
.gpio = WAM250_GPIO_LED_REPEATER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "wam250:white:wlan",
|
|
.gpio = WAM250_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button wam250_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = WAM250_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "wps",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = WAM250_GPIO_BTN_SPKADD,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init wam250_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
|
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = 0xfd;
|
|
|
|
/* LAN */
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.phy_mask = BIT(1);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + WAM250_MAC_OFFSET, 0);
|
|
ath79_register_eth(1);
|
|
|
|
/* WAN */
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + WAM250_MAC_OFFSET, 1);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(wam250_leds_gpio),
|
|
wam250_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, WAM250_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(wam250_gpio_keys),
|
|
wam250_gpio_keys);
|
|
|
|
ath79_wmac_set_ext_lna_gpio(0, WAM250_GPIO_EXT_LNA);
|
|
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_WAM250, "WAM250", "Samsung WAM250", wam250_setup);
|