EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ar71xx: add support for Samsung WAM250

Browse Source 
Samsung WAM250 is a dual-band (selectable, not simultaneous) wireless
hub, dedicated for Samsung Shape Wireless Audio System. The device is
based on Atheros AR9344. FCC ID: A3LWAM250.

Specification:

- 560/450/225 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet
- 2T2R 2.4/5 GHz (AR9344), with ext. PA (SE2598L, SE5003L) and LNA
- 1x USB 2.0
- 4x LED (all are driven by GPIO)
- 2x button (reset, wps/speaker add)
- DC jack for main power input (14 V)
- UART header on PCB (J4, RX: 3, TX: 5)

Flash instruction:

This device uses dual-image (switched between upgrades) with a common
jffs2 config partition. Fortunately, there is a way to disable this mode
so that more flash space can be used by OpenWrt image.

You can easily access this device over telnet, using root/root
credentials (the same also work for serial console access).

1. Make sure that your device uses second (bootpart=2) image using
   command: "fw_printenv bootpart".
2. If your device uses first image (bootpart=1), perform upgrade to the
   latest vendor firmware (after the update, device should boot from
   second partition) using web gui (default login: admin/1234567890).
3. Rename "sysupgrade" image to "firmware.bin", download it (you can use
   wget, tftp or ftpget) to "/tmp" and issue below commands:

   mtd_debug erase /dev/mtd3 0 $(wc -c /tmp/firmware.bin | awk -F' ' '{print $1}')
   mtd_debug write /dev/mtd3 0 $(wc -c /tmp/firmware.bin)
   fw_setenv bootpart
   fw_setenv bootcmd "bootm 0x9f070000"
   reboot

Revert to vendor firmware instruction:

1. Download vendor firmware to "/tmp" device and issue below commands:

   fw_setenv bootpart 1
   sysupgrade -n -F SS_BHUB_v2.2.05.bin

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz 2018-02-08 22:28:07 +01:00
parent 1b0e7a1453
commit e58e49bdbe
12 changed files with 159 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -910,6 +910,10 @@ tube2h)
ucidef_set_led_rssi "signal3" "SIGNAL3" "alfa:green:signal3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "signal4" "SIGNAL4" "alfa:green:signal4" "wlan0" "76" "100" "-75" "13"
;;
wam250)
ucidef_set_led_netdev "lan" "LAN" "$board:white:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wlan" "phy0tpt"
;;
wndap360)
ucidef_set_led_power "power" "POWER GREEN" "netgear:green:power" "1"
;;

3
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -236,7 +236,8 @@ get_status_led() {
;;
gl-ar750|\
hiveap-121|\
nbg6716)
nbg6716|\
wam250)
status_led="$board:white:power"
;;
hiwifi-hc6361)

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -1298,6 +1298,9 @@ ar71xx_board_detect() {
*"UniFiAP Outdoor+")
name="unifi-outdoor-plus"
;;
*"WAM250")
name="wam250"
;;
*"WBS210")
name="wbs210"
tplink_pharos_board_detect

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -286,6 +286,7 @@ platform_check_image() {
unifi-outdoor|\
unifiac-lite|\
unifiac-pro|\
wam250|\
weio|\
whr-g301n|\
whr-hp-g300n|\

1
target/linux/ar71xx/config-4.4
View File

@ -234,6 +234,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
# CONFIG_ATH79_MACH_UBNT_XM is not set
# CONFIG_ATH79_MACH_WAM250 is not set
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WI2A_AC200I is not set

1
target/linux/ar71xx/config-4.9
View File

@ -232,6 +232,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
# CONFIG_ATH79_MACH_UBNT_XM is not set
# CONFIG_ATH79_MACH_WAM250 is not set
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WI2A_AC200I is not set

10
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -948,6 +948,16 @@ config ATH79_MACH_JWAP230
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_WAM250
bool "Samsung WAM250 support"
select SOC_AR934X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -242,6 +242,7 @@ obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
obj-$(CONFIG_ATH79_MACH_WAM250) += mach-wam250.o
obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o

122
target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c Normal file
View File

@ -0,0 +1,122 @@
/*
* Samsung WAM250 board support
*
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define WAM250_GPIO_LED_LAN 13
#define WAM250_GPIO_LED_POWER 15
#define WAM250_GPIO_LED_REPEATER 14
#define WAM250_GPIO_LED_WLAN 12
#define WAM250_GPIO_BTN_RESET 17
#define WAM250_GPIO_BTN_SPKADD 1
#define WAM250_GPIO_EXT_LNA 19
#define WAM250_MAC_OFFSET 2
#define WAM250_KEYS_POLL_INTERVAL 20
#define WAM250_KEYS_DEBOUNCE_INTERVAL (3 * WAM250_KEYS_POLL_INTERVAL)
static struct gpio_led wam250_leds_gpio[] __initdata = {
{
.name = "wam250:white:lan",
.gpio = WAM250_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "wam250:white:power",
.gpio = WAM250_GPIO_LED_POWER,
.default_state = LEDS_GPIO_DEFSTATE_KEEP,
.active_low = 1,
}, {
.name = "wam250:white:repeater",
.gpio = WAM250_GPIO_LED_REPEATER,
.active_low = 1,
}, {
.name = "wam250:white:wlan",
.gpio = WAM250_GPIO_LED_WLAN,
.active_low = 1,
},
};
static struct gpio_keys_button wam250_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL,
.gpio = WAM250_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL,
.gpio = WAM250_GPIO_BTN_SPKADD,
.active_low = 1,
},
};
static void __init wam250_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
ath79_register_m25p80(NULL);
ath79_register_mdio(1, 0x0);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = 0xfd;
/* LAN */
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.phy_mask = BIT(1);
ath79_init_mac(ath79_eth1_data.mac_addr, art + WAM250_MAC_OFFSET, 0);
ath79_register_eth(1);
/* WAN */
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.speed = SPEED_100;
ath79_init_mac(ath79_eth0_data.mac_addr, art + WAM250_MAC_OFFSET, 1);
ath79_register_eth(0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wam250_leds_gpio),
wam250_leds_gpio);
ath79_register_gpio_keys_polled(-1, WAM250_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wam250_gpio_keys),
wam250_gpio_keys);
ath79_wmac_set_ext_lna_gpio(0, WAM250_GPIO_EXT_LNA);
ath79_register_usb();
ath79_register_wmac(art, NULL);
}
MIPS_MACHINE(ATH79_MACH_WAM250, "WAM250", "Samsung WAM250", wam250_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -315,6 +315,7 @@ enum ath79_mach_type {
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
ATH79_MACH_WAM250, /* Samsung WAM250 */
ATH79_MACH_WBS210, /* TP-LINK WBS210 */
ATH79_MACH_WBS510, /* TP-LINK WBS510 */
ATH79_MACH_WEIO, /* WeIO board */

1
target/linux/ar71xx/generic/config-default
View File

@ -165,6 +165,7 @@ CONFIG_ATH79_MACH_TUBE2H=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WAM250=y
CONFIG_ATH79_MACH_WEIO=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WLAE_AG300N=y

12
target/linux/ar71xx/image/generic.mk
View File

@ -1101,6 +1101,18 @@ define Device/bhr-4grv2
endef
TARGET_DEVICES += bhr-4grv2
define Device/wam250
DEVICE_TITLE := Samsung WAM250
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
BOARDNAME := WAM250
IMAGE_SIZE := 15872k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),128k(nvram)ro,15872k(firmware),64k(art)ro
SUPPORTED_DEVICES := wam250
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += wam250
define Device/wlr8100
DEVICE_TITLE := Sitecom WLR-8100
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \