wifi-tally_Oostendam/nodemcu-firmware/docs/modules/wifi_monitor.md

WiFi.monitor Module

Since	Origin / Contributor	Maintainer	Source
2017-12-20	Philip Gladstone	Philip Gladstone	wifi_monitor.c

This is an optional module that is only included if LUA_USE_MODULES_WIFI_MONITOR is defined in the user_modules.h file. This module provides access to the monitor mode features of the ESP8266 chipset. In particular, it provides access to received WiFi management frames.

This module is not for casual use -- it requires an understanding of IEEE802.11 management protocols.

wifi.monitor.start()

This registers a callback function to be called whenever a management frame is received. Note that this can be at quite a high rate, so some limited filtering is provided before the callback is invoked. Only the first 110 bytes or so of the frame are returned -- this is an SDK restriction. Any connected AP/station will be disconnected. Calling this function sets the channel back to 1.

Syntax

wifi.monitor.start([filter parameters,] mgmt_frame_callback)

Parameters

• filter parameters. This is a byte offset (1 based) into the underlying data structure, a value to match against, and an optional mask to use for matching. The data structure used for filtering is 12 bytes of radio header, and then the actual frame. The first byte of the frame is therefore numbered 13. The filter values of 13, 0x80 will just extract beacon frames.
• mgmt_frame_callback is a function which is invoked with a single argument which is a wifi.packet object which has many methods and attributes.

Returns

nothing.

Example

wifi.monitor.start(13, 0x80, function(pkt)
    print ('Beacon: ' .. pkt.bssid_hex .. " '" .. pkt[0] .. "' ch " .. pkt[3]:byte(1))
end)
wifi.monitor.channel(6)

wifi.monitor.stop()

This disables the monitor mode and returns to normal operation. There are no parameters and no return value.

Syntax

wifi.monitor.stop()

wifi.monitor.channel()

This sets the channel number to monitor. Note that in many applications you will want to step through the channel numbers at regular intervals. Beacon frames (in particular) are typically sent every 102 milliseconds, so a switch time of (say) 150 milliseconds seems to work well. Note that this function should be called after starting to monitor, since wifi.monitor.start resets the channel back to 1.

Syntax

wifi.monitor.channel(channel)

Parameters

• channel sets the channel number in the range 1 to 15.

Returns

nothing.

wifi.packet object

This object provides access to the raw packet data and also many methods to extract data from the packet in a simple way.

packet:radio_byte()

This is like the string.byte method, except that it gives access to the bytes of the radio header.

Syntax

packet:radio_byte(n)

Parameters

• n the byte number (1 based) to get from the radio header portion of the packet

Returns

0-255 as the value of the byte nothing if the offset is not within the radio header.

packet:frame_byte()

This is like the string.byte method, except that it gives access to the bytes of the received frame.

Syntax

packet:frame_byte(n)

Parameters

• n the byte number (1 based) to get from the received frame.

Returns

0-255 as the value of the byte nothing if the offset is not within the received frame.

packet:radio_sub()

This is like the string.sub method, except that it gives access to the bytes of the radio header.

Syntax

packet:radio_sub(start, end)

Parameters

Same rules as for string.sub except that it operates on the radio header.

Returns

A string according to the string.sub rules.

packet:frame_sub()

This is like the string.sub method, except that it gives access to the bytes of the received frame.

Syntax

packet:frame_sub(start, end)

Parameters

Same rules as for string.sub except that it operates on the received frame.

Returns

A string according to the string.sub rules.

packet:radio_subhex()

This is like the string.sub method, except that it gives access to the bytes of the radio header. It also converts them into hex efficiently.

Syntax

packet:radio_subhex(start, end [, seperator])

Parameters

Same rules as for string.sub except that it operates on the radio header.

• seperator is an optional sting which is placed between the individual hex pairs returned.

Returns

A string according to the string.sub rules, converted into hex with possible inserted spacers.

packet:frame_sub()

This is like the string.sub method, except that it gives access to the bytes of the received frame.

Syntax

packet:frame_subhex(start, end [, seperator])

Parameters

Same rules as for string.sub except that it operates on the received frame.

• seperator is an optional sting which is placed between the individual hex pairs returned.

Returns

A string according to the string.sub rules, converted into hex with possible inserted spacers.

packet:ie_table()

This returns a table of the information elements from the management frame. The table keys values are the information element numbers (0 - 255). Note that IE0 is the SSID. This method is mostly only useful if you need to determine which information elements were in the management frame.

Syntax

packet:ie_table()

Parameters

None.

Returns

A table with all the information elements in it.

Example

print ("SSID", packet:ie_table()[0])

Note that this is possibly the worst way of getting the SSID.

Alternative

The packet object itself can be indexed to extract the information elements.

Example

print ("SSID", packet[0])

This is more efficient than the above approach, but requires you to remember that IE0 is the SSID.

packet.<attribute>

The packet object has many attributes on it. These allow easy access to all the fields, though not an easy way to enumerate them. All integers are unsigned except where noted. Information Elements are only returned if they are completely within the captured frame. This can mean that for some frames, some of the information elements can be missing.

When a string is returned as the value of a field, it can (and often is) be a binary string with embedded nulls. All information elements are returned as strings even if they are only one byte long and look like a number in the specification. This is purely to make the interface consistent. Note that even SSIDs can contain embedded nulls.

Attribute name	Type
aggregation	Integer
ampdu_cnt	Integer
association_id	Integer
authentication_algorithm	Integer
authentication_transaction	Integer
beacon_interval	Integer
beacon_interval	Integer
bssid	String
bssid_hex	String
bssidmatch0	Integer
bssidmatch1	Integer
capability	Integer
channel	Integer
current_ap	String
cwb	Integer
dmatch0	Integer
dmatch1	Integer
dstmac	String
dstmac_hex	String
duration	Integer
fec_coding	Integer
frame	String (the entire received frame)
frame_hex	String
fromds	Integer
header	String (the fixed part of the management frame)
ht_length	Integer
ie_20_40_bss_coexistence	String
ie_20_40_bss_intolerant_channel_report	String
ie_advertisement_protocol	String
ie_aid	String
ie_antenna	String
ie_ap_channel_report	String
ie_authenticated_mesh_peering_exchange	String
ie_beacon_timing	String
ie_bss_ac_access_delay	String
ie_bss_available_admission_capacity	String
ie_bss_average_access_delay	String
ie_bss_load	String
ie_bss_max_idle_period	String
ie_cf_parameter_set	String
ie_challenge_text	String
ie_channel_switch_announcement	String
ie_channel_switch_timing	String
ie_channel_switch_wrapper	String
ie_channel_usage	String
ie_collocated_interference_report	String
ie_congestion_notification	String
ie_country	String
ie_destination_uri	String
ie_diagnostic_report	String
ie_diagnostic_request	String
ie_dms_request	String
ie_dms_response	String
ie_dse_registered_location	String
ie_dsss_parameter_set	String
ie_edca_parameter_set	String
ie_emergency_alart_identifier	String
ie_erp_information	String
ie_event_report	String
ie_event_request	String
ie_expedited_bandwidth_request	String
ie_extended_bss_load	String
ie_extended_capabilities	String
ie_extended_channel_switch_announcement	String
ie_extended_supported_rates	String
ie_fast_bss_transition	String
ie_fh_parameter_set	String
ie_fms_descriptor	String
ie_fms_request	String
ie_fms_response	String
ie_gann	String
ie_he_capabilities	String
ie_hopping_pattern_parameters	String
ie_hopping_pattern_table	String
ie_ht_capabilities	String
ie_ht_operation	String
ie_ibss_dfs	String
ie_ibss_parameter_set	String
ie_interworking	String
ie_link_identifier	String
ie_location_parameters	String
ie_management_mic	String
ie_mccaop	String
ie_mccaop_advertisement	String
ie_mccaop_advertisement_overview	String
ie_mccaop_setup_reply	String
ie_mccaop_setup_request	String
ie_measurement_pilot_transmission	String
ie_measurement_report	String
ie_measurement_request	String
ie_mesh_awake_window	String
ie_mesh_channel_switch_parameters	String
ie_mesh_configuration	String
ie_mesh_id	String
ie_mesh_link_metric_report	String
ie_mesh_peering_management	String
ie_mic	String
ie_mobility_domain	String
ie_multiple_bssid	String
ie_multiple_bssid_index	String
ie_neighbor_report	String
ie_nontransmitted_bssid_capability	String
ie_operating_mode_notification	String
ie_overlapping_bss_scan_parameters	String
ie_perr	String
ie_power_capability	String
ie_power_constraint	String
ie_prep	String
ie_preq	String
ie_proxy_update	String
ie_proxy_update_confirmation	String
ie_pti_control	String
ie_qos_capability	String
ie_qos_map_set	String
ie_qos_traffic_capability	String
ie_quiet	String
ie_quiet_channel	String
ie_rann	String
ie_rcpi	String
ie_request	String
ie_ric_data	String
ie_ric_descriptor	String
ie_rm_enabled_capacities	String
ie_roaming_consortium	String
ie_rsn	String
ie_rsni	String
ie_schedule	String
ie_secondary_channel_offset	String
ie_ssid	String
ie_ssid_list	String
ie_supported_channels	String
ie_supported_operating_classes	String
ie_supported_rates	String
ie_tclas	String
ie_tclas_processing	String
ie_tfs_request	String
ie_tfs_response	String
ie_tim	String
ie_tim_broadcast_request	String
ie_tim_broadcast_response	String
ie_time_advertisement	String
ie_time_zone	String
ie_timeout_interval	String
ie_tpc_report	String
ie_tpc_request	String
ie_tpu_buffer_status	String
ie_ts_delay	String
ie_tspec	String
ie_uapsd_coexistence	String
ie_vendor_specific	String
ie_vht_capabilities	String
ie_vht_operation	String
ie_vht_transmit_power_envelope	String
ie_wakeup_schedule	String
ie_wide_bandwidth_channel_switch	String
ie_wnm_sleep_mode	String
is_group	Integer
legacy_length	Integer
listen_interval	Integer
mcs	Integer
moredata	Integer
moreflag	Integer
not_counding	Integer
number	Integer
order	Integer
protectedframe	Integer
protocol	Integer
pwrmgmt	Integer
radio	String (the entire radio header)
rate	Integer
reason	Integer
retry	Integer
rssi	Signed Integer
rxend_state	Integer
sgi	Integer
sig_mode	Integer
smoothing	Integer
srcmac	String
srcmac_hex	String
status	Integer
stbc	Integer
subtype	Integer
timestamp	String
tods	Integer
type	Integer

If you don't know what some of the attributes are, then you probably need to read the IEEE 802.11 specifications and other supporting material.

Example

print ("SSID", packet.ie_ssid)

The Radio Header

The Radio Header has been mentioned above as a 12 byte structure. The layout is shown below. The only comments are in Chinese.

struct {
    signed rssi:8;//表示该包的信号强度
    unsigned rate:4;
    unsigned is_group:1;
    unsigned:1;
    unsigned sig_mode:2;//表示该包是否是11n 的包，0 表示非11n，非0 表示11n
    unsigned legacy_length:12;//如果不是11n 的包，它表示包的长度
    unsigned damatch0:1;
    unsigned damatch1:1;
    unsigned bssidmatch0:1;
    unsigned bssidmatch1:1;
    unsigned MCS:7;//如果是11n 的包，它表示包的调制编码序列，有效值：0-76
    unsigned CWB:1;//如果是11n 的包，它表示是否为HT40 的包
    unsigned HT_length:16;//如果是11n 的包，它表示包的长度
    unsigned Smoothing:1;
    unsigned Not_Sounding:1;
    unsigned:1;
    unsigned Aggregation:1;
    unsigned STBC:2;
    unsigned FEC_CODING:1;//如果是11n 的包，它表示是否为LDPC 的包
    unsigned SGI:1;
    unsigned rxend_state:8;
    unsigned ampdu_cnt:8;
    unsigned channel:4;//表示该包所在的信道
    unsigned:12;
}