Eljakim Herrewijnen 50b5fc1824 Initial commit

2021-09-27 21:52:27 +02:00

26 KiB

Raw Permalink Blame History

node Module

Since	Origin / Contributor	Maintainer	Source
2014-12-22	Zeroday	TerryE	node.c

The node module provides access to system-level features such as sleep, restart and various info and IDs.

node.bootreason()

Returns the boot reason and extended reset info.

The first value returned is the raw code, not the new "reset info" code which was introduced in recent SDKs. Values are:

1, power-on
2, reset (software?)
3, hardware reset via reset pin
4, WDT reset (watchdog timeout)

The second value returned is the extended reset cause. Values are:

0, power-on
1, hardware watchdog reset
2, exception reset
3, software watchdog reset
4, software restart
5, wake from deep sleep
6, external reset

In general, the extended reset cause supercedes the raw code. The raw code is kept for backwards compatibility only. For new applications it is highly recommended to use the extended reset cause instead.

In case of extended reset cause 3 (exception reset), additional values are returned containing the crash information. These are, in order, EXCCAUSE, EPC1, EPC2, EPC3, EXCVADDR, and DEPC.

Syntax

node.bootreason()

Parameters

none

Returns

rawcode, reason [, exccause, epc1, epc2, epc3, excvaddr, depc ]

Example

_, reset_reason = node.bootreason()
if reset_reason == 0 then print("Power UP!") end

node.chipid()

Returns the ESP chip ID.

Syntax

node.chipid()

Parameters

none

Returns

chip ID (number)

node.compile()

Compiles a Lua text file into Lua bytecode, and saves it as .lc file.

Syntax

node.compile("file.lua")

Parameters

filename name of Lua text file

Returns

nil

Example

file.open("hello.lua","w+")
file.writeline([[print("hello nodemcu")]])
file.writeline([[print(node.heap())]])
file.close()

node.compile("hello.lua")
dofile("hello.lua")
dofile("hello.lc")

node.dsleep()

Enters deep sleep mode, wakes up when timed out.

Theoretical maximum deep sleep duration can be found with node.dsleepMax(). "Max deep sleep for ESP8266" claims the realistic maximum be around 3.5h.

!!! caution

This function can only be used in the condition that esp8266 PIN32(RST) and PIN8(XPD_DCDC aka GPIO16) are connected together. Using sleep(0) will set no wake up timer, connect a GPIO to pin RST, the chip will wake up by a falling-edge on pin RST.

Syntax

node.dsleep(us, option, instant)

Parameters

us number (integer) or nil, sleep time in micro second. If us == 0, it will sleep forever. If us == nil, will not set sleep time.
option number (integer) or nil. If nil, it will use last alive setting as default option.
- 0, init data byte 108 is valuable
- > 0, init data byte 108 is valueless
- 0, RF_CAL or not after deep-sleep wake up, depends on init data byte 108
- 1, RF_CAL after deep-sleep wake up, there will be large current
- 2, no RF_CAL after deep-sleep wake up, there will only be small current
- 4, disable RF after deep-sleep wake up, just like modem sleep, there will be the smallest current
instant number (integer) or nil. If present and non-zero, the chip will enter Deep-sleep immediately and will not wait for the Wi-Fi core to be shutdown.

Returns

nil

Example

--do nothing
node.dsleep()
--sleep μs
node.dsleep(1000000)
--set sleep option, then sleep μs
node.dsleep(1000000, 4)
--set sleep option only
node.dsleep(nil,4)

node.dsleepMax()

Returns the current theoretical maximum deep sleep duration.

!!! caution

While it is possible to specify a longer sleep time than the theoretical maximum sleep duration, it is not recommended to exceed this maximum. In tests documented at ["Max deep sleep for ESP8266"](https://thingpulse.com/max-deep-sleep-for-esp8266/) the device never woke up again if the specified sleep time was beyond `dsleepMax()`.

!!! note

This theoretical maximum is dependent on ambient temperature: lower temp = shorter sleep duration, higher temp = longer sleep duration

Syntax

node.dsleepMax()

Parameters

none

Returns

max_duration

Example

node.dsleep(node.dsleepMax())

node.flashid()

Returns the flash chip ID.

Syntax

node.flashid()

Parameters

none

Returns

flash ID (number)

node.flashindex()

Deprecated synonym for node.LFS.get() to return an LFS function reference.

Note that this returns nil if the function does not exist in LFS.

node.flashreload()

Deprecated synonym for node.LFS.reload() to reload LFS (Lua Flash Store) with the named flash image provided.

node.flashsize()

Returns the flash chip size in bytes. On 4MB modules like ESP-12 the return value is 4194304 = 4096KB.

Syntax

node.flashsize()

Parameters

none

Returns

flash size in bytes (integer)

node.getcpufreq()

Get the current CPU Frequency.

Syntax

node.getcpufreq()

Parameters

none

Returns

Current CPU frequency (number)

Example

do
  local cpuFreq = node.getcpufreq()
  print("The current CPU frequency is " .. cpuFreq .. " MHz")
end

node.getpartitiontable()

Get the current LFS and SPIFFS partition information.

Syntax

node.getpartitiontable()

Parameters

none

Returns

An array containing entries for lfs_addr, lfs_size, spiffs_addr and spiffs_size. The address values are offsets relative to the start of the Flash memory.

Example

print("The LFS size is " .. node.getpartitiontable().lfs_size)

node.heap()

Returns the current available heap size in bytes. Note that due to fragmentation, actual allocations of this size may not be possible.

Syntax

node.heap()

Parameters

none

Returns

system heap size left in bytes (number)

node.info()

Returns information about hardware, software version and build configuration.

Syntax

node.info([group])

Parameters

group A designator for a group of properties. May be one of "hw", "sw_version", "build_config". It is currently optional; if omitted the legacy structure is returned. However, not providing any value is deprecated.

Returns

If a group is given the return value will be a table containing the following elements:

for group = "hw"
- chip_id (number)
- flash_id (number)
- flash_size (number)
- flash_mode (number) 0 = QIO, 1 = QOUT, 2 = DIO, 15 = DOUT.
- flash_speed (number)
for group = "lfs"
- lfs_base (number) Flash offset of selected LFS region
- lfs_mapped (number) Mapped memory address of selected LFS region
- lfs_size (number) size of selected LFS region
- lfs_used (number) actual size used by current LFS image
for group = "sw_version"
- git_branch (string)
- git_commit_id (string)
- git_release (string) release name +additional commits e.g. "2.0.0-master_20170202 +403"
- git_commit_dts (string) commit timestamp in an ordering format. e.g. "201908111200"
- node_version_major (number)
- node_version_minor (number)
- node_version_revision (number)
for group = "build_config"
- ssl (boolean)
- lfs_size (number) as defined at build time
- modules (string) comma separated list
- number_type (string) integer or float

!!! attention

Not providing a `group` is deprecated and support for that will be removed in one of the next releases.

for group = nil
- majorVer (number)
- minorVer (number)
- devVer (number)
- chipid (number)
- flashid (number)
- flashsize (number)
- flashmode (number)
- flashspeed (number)

Example

majorVer, minorVer, devVer, chipid, flashid, flashsize, flashmode, flashspeed = node.info()
print("NodeMCU "..majorVer.."."..minorVer.."."..devVer)

for k,v in pairs(node.info("build_config")) do
  print (k,v)
end

print(node.info("sw_version").git_release)

node.input()

Submits a string to the Lua interpreter. Similar to pcall(loadstring(str)), but without the single-line limitation. Note that the Line interpreter only actions complete Lua chunks. A Lue Lua chunk must comprise one or more complete '\n' terminaed lines that form a complete compilation unit.

Syntax

node.input(str)

Parameters

str Lua chunk

Returns

nil

Example

sk:on("receive", function(conn, payload) node.input(payload) end)

See the telnet/telnet.lua in lua_examples for a more comprehensive example.

node.LFS

Sub-table containing the API for Lua Flash Store(LFS) access. Programmers might prefer to map this to a global or local variable for convenience for example:

local LFS = node.LFS

This table contains the following methods and properties:

Property/Method	Description
`config`	A synonym for `node.info('lfs')`. Returns the properties `lfs_base`, `lfs_mapped`, `lfs_size`, `lfs_used`.
`get()`	See node.LFS.get().
`list()`	See node.LFS.list().
`reload()`	See node.LFS.reload().
`time`	Returns the Unix timestamp at time of image creation.

node.LFS.get()

Returns the function reference for a function in LFS.

Note that unused node.LFS properties map onto the equialent get() call so for example: node.LFS.mySub1 is a synonym for node.LFS.get('mySub1').

Syntax

node.LFS.get(modulename)

Parameters

modulename The name of the module to be loaded.

Returns

If the LFS is loaded and the modulename is a string that is the name of a valid module in the LFS, then the function is returned in the same way the load() and the other Lua load functions do
Otherwise nil is returned.

node.LFS.list()

List the modules in LFS.

Returns

If no LFS image IS LOADED then nil is returned.
Otherwise an sorted array of the name of modules in LFS is returned.

node.LFS.reload()

Reload LFS with the flash image provided. Flash images can be generated on the host machine using the luac.crosscommand.

Syntax

node.LFS.reload(imageName)

Parameters

imageName The name of a image file in the filesystem to be loaded into the LFS.

Returns

In the case when the imagename is a valid LFS image, this is expanded and loaded into flash, and the ESP is then immediately rebooted, so control is not returned to the calling Lua application in the case of a successful reload.
The reload process internally makes multiple passes through the LFS image file. The first pass validates the file and header formats and detects many errors. If any is detected then an error string is returned.

node.output()

Redirects the Lua interpreter to a stdout pipe when a CB function is specified (See pipe module) and resets output to normal otherwise. Optionally also prints to the serial console.

Syntax

node.output(function(pipe), serial_debug)

Parameters

output_fn(pipe) a function accept every output as str, and can send the output to a socket (or maybe a file). Note that this function must conform to the fules for a pipe reader callback.
serial_debug 1 output also show in serial. 0: no serial output.

Returns

nil

Example

See the telnet/telnet.lua in lua_examples for a more comprehensive example of its use.

node.readvdd33() --deprecated

Moved to adc.readvdd33().

node.restart()

Restarts the chip.

Syntax

node.restart()

Parameters

none

Returns

nil

node.restore()

Restores system configuration to defaults using the SDK function system_restore(), which is described in the documentation as:

Reset default settings of following APIs: wifi_station_set_auto_connect, wifi_set_phy_mode, wifi_softap_set_config related, wifi_station_set_config related, wifi_set_opmode, and APs’ information recorded by #define AP_CACHE.

Syntax

node.restore()

Parameters

none

Returns

nil

Example

node.restore()
node.restart() -- ensure the restored settings take effect

node.setcpufreq()

Change the working CPU Frequency.

Syntax

node.setcpufreq(speed)

Parameters

speed constant 'node.CPU80MHZ' or 'node.CPU160MHZ'

Returns

target CPU frequency (number)

Example

node.setcpufreq(node.CPU80MHZ)

node.setpartitiontable()

Sets the current LFS and / or SPIFFS partition information.

Syntax

node.setpartitiontable(partition_info)

!!! note This function is typically only used once during initial provisioning after first flashing the firmware. It does some consistency checks to validate the specified parameters, and it then reboots the ESP module to load the new partition table. If the LFS or SPIFFS regions have changed then you will need to reload LFS, reformat the SPIFSS and reload its contents.

Parameters

An array containing one or more of the following enties. The address values are byte offsets relative to the start of the Flash memory. The size values are in bytes. Note that these parameters must be a multiple of 8Kb to align to Flash page boundaries.

lfs_addr. The base address of the LFS region.
lfs_size. The size of the LFS region.
spiffs_addr. The base address of the SPIFFS region.
spiffs_size. The size of the SPIFFS region.

Returns

Not applicable. The ESP module will be rebooted for a valid new set, or a Lua error will be thown if inconsistencies are detected.

Example

node.setpartitiontable{lfs_size = 0x20000, spiffs_addr = 0x120000, spiffs_size = 0x20000}

node.sleep()

Put NodeMCU in light sleep mode to reduce current consumption.

NodeMCU can not enter light sleep mode if wifi is suspended.
All active timers will be suspended and then resumed when NodeMCU wakes from sleep.

!!! attention This is disabled by default. Modify PMSLEEP_ENABLE in app/include/user_config.h to enable it.

Syntax

node.sleep({wake_pin[, int_type, resume_cb, preserve_mode]})

Parameters

wake_pin 1-12, pin to attach wake interrupt to. Note that pin 0(GPIO 16) does not support interrupts.
- Please refer to the GPIO module for more info on the pin map.
int_type type of interrupt that you would like to wake on. (Optional, Default: node.INT_LOW)
- valid interrupt modes:
  - node.INT_UP Rising edge
  - node.INT_DOWN Falling edge
  - node.INT_BOTH Both edges
  - node.INT_LOW Low level
  - node.INT_HIGH High level
resume_cb Callback to execute when WiFi wakes from suspension. (Optional)
preserve_mode preserve current WiFi mode through node sleep. (Optional, Default: true)
- If true, Station and StationAP modes will automatically reconnect to previously configured Access Point when NodeMCU resumes.
- If false, discard WiFi mode and leave NodeMCU in wifi.NULL_MODE. WiFi mode will be restored to original mode on restart.

Returns

nil

Example


--Put NodeMCU in light sleep mode indefinitely with resume callback and wake interrupt
 cfg={}
 cfg.wake_pin=3
 cfg.resume_cb=function() print("WiFi resume") end

 node.sleep(cfg)

--Put NodeMCU in light sleep mode with interrupt, resume callback and discard WiFi mode
 cfg={}
 cfg.wake_pin=3 --GPIO0
 cfg.resume_cb=function() print("WiFi resume") end
 cfg.preserve_mode=false

 node.sleep(cfg)

node.startupcommand()

Overrides the default startup action on processor restart, preplacing the executing init.lua if it exists. This is now deprecated in favor of node.startup({command="the command"}).

Syntax

node.startupcommand(string)

Parameters

string prefixed with either
- @, the remaining string is a filename to be executed.
- =, the remaining string is Lua chunk to be compiled and executed.

Returns

`status` this is `false` if write to the Reboot Config Record fails.  Note that no attempt is made to	parse or validate the string. If the command is invalid or the file missing then this will be reported on the next restart.

Example

node.startupcommand("@myappstart.lc")  -- Execute the compiled file myappstart.lc on startup

-- Execute the LFS routine init() in preference to init.lua
node.startupcommand("=if LFS.init then LFS.init() else dofile('init.lua') end")

node.startupcounts()

Query the performance of system startup.

!!! Important

This function is only available if the firmware is built with `PLATFORM_STARTUP_COUNT` defined. This would normally be done by uncommenting the `#define PLATFORM_STARTUP_COUNT` line in `app/include/user_config.h`.

Syntax

node.startupcounts([marker])

Parameters

marker If present, this will add another entry into the startup counts

Returns

An array of tables which indicate how many CPU cycles had been consumed at each step of platform boot.

Example

=sjson.encode(node.startupcounts())

This might generate the output (formatted for readability):

[
 {"ccount":3774328,"name":"user_pre_init","line":124},
 {"ccount":3842297,"name":"user_pre_init","line":180},
 {"ccount":9849869,"name":"user_init","line":327},
 {"ccount":10008843,"name":"nodemcu_init","line":293},
 {"ccount":10295779,"name":"pmain","line":234},
 {"ccount":11378766,"name":"pmain","line":256},
 {"ccount":11565912,"name":"pmain","line":260},
 {"ccount":12158242,"name":"node_startup_counts","line":1},
 {"ccount":12425790,"name":"myspiffs_mount","line":126},
 {"ccount":12741862,"name":"myspiffs_mount","line":148},
 {"ccount":13983567,"name":"pmain","line":265}
]

The crucial entry is the one for node_startup_counts which is when the application had started running. This was on a Wemos D1 Mini with flash running at 80MHz. The startup options were all turned on. Note that the clock speed changes in user_pre_init to 160MHz. The total time was (approximately): 3.8 / 80 + (12 - 3.8) / 160 = 98ms. With startup options of 0, the time is 166ms. These times may be slightly optimistic as the clock is only 52MHz for a time during boot.

node.startup()

Get/set options that control the startup process. This interface will grow over time.

Syntax

node.startup([{table}])

Parameters

If the argument is omitted, then no change is made to the current set of startup options. If the argument is the empty table {} then all options are reset to their default values.

table one or more options:
- banner - set to true or false to indicate whether the startup banner should be displayed or not. (default: true)
- frequency - set to node.CPU80MHZ or node.CPU160MHZ to indicate the initial CPU speed. (default: node.CPU80MHZ)
- delay_mount - set to true or false to indicate whether the SPIFFS filesystem mount is delayed until it is first needed or not. (default: false)
- command - set to a string which is the initial command that is run. This is the same string as in the node.startupcommand.

Returns

table This is the complete set of options in the state that will take effect on the next boot. Note that the command key may be missing -- in which case the default value will be used.

Example

node.startup({banner=false, frequency=node.CPU160MHZ})  -- Prevent printing the banner and run at 160MHz

node.stripdebug()

Controls the amount of debug information kept during node.compile(), and allows removal of debug information from already compiled Lua code.

Only recommended for advanced users, the NodeMCU defaults are fine for almost all use cases.

####Syntax node.stripdebug([level[, function]])

Parameters

level
- 1, don't discard debug info
- 2, discard Local and Upvalue debug info
- 3, discard Local, Upvalue and line-number debug info
function a compiled function to be stripped per setfenv except 0 is not permitted.

If no arguments are given then the current default setting is returned. If function is omitted, this is the default setting for future compiles. The function argument uses the same rules as for setfenv().

Returns

If invoked without arguments, returns the current level settings. Otherwise, nil is returned.

Example

node.stripdebug(3)
node.compile('bigstuff.lua')

node.osprint()

Controls whether the debugging output from the Espressif SDK is printed. Note that this is only available if the firmware is build with DEVELOPMENT_TOOLS defined.

####Syntax node.osprint(enabled)

Parameters

enabled This is either true to enable printing, or false to disable it. The default is false.

Returns

Nothing

Example

node.osprint(true)

node.random()

This behaves like math.random except that it uses true random numbers derived from the ESP8266 hardware. It returns uniformly distributed numbers in the required range. It also takes care to get large ranges correct.

It can be called in three ways. Without arguments in the floating point build of NodeMCU, it returns a random real number with uniform distribution in the interval [0,1). When called with only one argument, an integer n, it returns an integer random number x such that 1 <= x <= n. For instance, you can simulate the result of a die with random(6). Finally, random can be called with two integer arguments, l and u, to get a pseudo-random integer x such that l <= x <= u.

Syntax

node.random() node.random(n) node.random(l, u)

Parameters

n the number of distinct integer values that can be returned -- in the (inclusive) range 1 .. n
l the lower bound of the range
u the upper bound of the range

Returns

The random number in the appropriate range. Note that the zero argument form will always return 0 in the integer build.

Example

print ("I rolled a", node.random(6))

node.egc module

node.egc.setmode()

Sets the Emergency Garbage Collector mode. The EGC whitepaper provides more detailed information on the EGC.

####Syntax node.egc.setmode(mode, [param])

Parameters

mode
- node.egc.NOT_ACTIVE EGC inactive, no collection cycle will be forced in low memory situations
- node.egc.ON_ALLOC_FAILURE Try to allocate a new block of memory, and run the garbage collector if the allocation fails. If the allocation fails even after running the garbage collector, the allocator will return with error.
- node.egc.ON_MEM_LIMIT Run the garbage collector when the memory used by the Lua script goes beyond an upper limit. If the upper limit can't be satisfied even after running the garbage collector, the allocator will return with error. If the given limit is negative, it is interpreted as the desired amount of heap which should be left available. Whenever the free heap (as reported by node.heap() falls below the requested limit, the garbage collector will be run.
- node.egc.ALWAYS Run the garbage collector before each memory allocation. If the allocation fails even after running the garbage collector, the allocator will return with error. This mode is very efficient with regards to memory savings, but it's also the slowest.
level in the case of node.egc.ON_MEM_LIMIT, this specifies the memory limit.

Returns

nil

Example

node.egc.setmode(node.egc.ALWAYS, 4096) -- This is the default setting at startup. node.egc.setmode(node.egc.ON_ALLOC_FAILURE) -- This is the fastest activeEGC mode. node.egc.setmode(node.egc.ON_MEM_LIMIT, 30720) -- Only allow the Lua runtime to allocate at most 30k, collect garbage if limit is about to be hit node.egc.setmode(node.egc.ON_MEM_LIMIT, -6144) -- Try to keep at least 6k heap available for non-Lua use (e.g. network buffers)

node.egc.meminfo()

Returns memory usage information for the Lua runtime.

####Syntax total_allocated, estimated_used = node.egc.meminfo()

Parameters

None.

Returns

total_allocated The total number of bytes allocated by the Lua runtime. This is the number which is relevant when using the node.egc.ON_MEM_LIMIT option with positive limit values.
estimated_used This value shows the estimated usage of the allocated memory.

node.task module

node.task.post()

Enable a Lua callback or task to post another task request. Note that as per the example multiple tasks can be posted in any task, but the highest priority is always delivered first.

If the task queue is full then a queue full error is raised.

####Syntax node.task.post([task_priority], function)

Parameters

task_priority (optional)
- node.task.LOW_PRIORITY = 0
- node.task.MEDIUM_PRIORITY = 1
- node.task.HIGH_PRIORITY = 2
function a callback function to be executed when the task is run.

If the priority is omitted then this defaults to node.task.MEDIUM_PRIORITY

Returns

nil

Example

for i = node.task.LOW_PRIORITY, node.task.HIGH_PRIORITY do
  node.task.post(i,function(p2)
    print("priority is "..p2)
  end)
end

prints

priority is 2
priority is 1
priority is 0

26 KiB Raw Permalink Blame History Unescape Escape

node Module

node.bootreason()

Syntax

Parameters

Returns

Example

node.chipid()

Syntax

Parameters

Returns

node.compile()

Syntax

Parameters

Returns

Example

node.dsleep()

Syntax

Parameters

Returns

Example

See also

node.dsleepMax()

Syntax

Parameters

Returns

Example

See also

node.flashid()

Syntax

Parameters

Returns

node.flashindex()

node.flashreload()

node.flashsize()

Syntax

Parameters

Returns

node.getcpufreq()

Syntax

Parameters

Returns

Example

node.getpartitiontable()

Syntax

Parameters

Returns

Example

See also

node.heap()

Syntax

Parameters

Returns

node.info()

Syntax

Parameters

Returns

Example

node.input()

Syntax

Parameters

Returns

Example

See also

node.LFS

node.LFS.get()

Syntax

Parameters

Returns

node.LFS.list()

Returns

node.LFS.reload()

Syntax

Parameters

Returns

node.output()

Syntax

Parameters

Returns

Example

26 KiB

Raw Permalink Blame History