83 lines
2.4 KiB
C
83 lines
2.4 KiB
C
#include "types.h"
|
|
#define UART_A 0
|
|
#define UART_B 1
|
|
#define UART_C 2
|
|
#define UART_D 3
|
|
|
|
#define BAUD_115200 115200
|
|
|
|
#define UART_TX_IDLE BIT(0)
|
|
#define UART_RX_RDYR BIT(1)
|
|
|
|
#define UART_TX_FIFO_FULL BIT(8)
|
|
#define UART_RX_FIFO_EMPTY BIT(9)
|
|
|
|
#define UART_INVERT_RXD BIT(0)
|
|
#define UART_INVERT_TXD BIT(1)
|
|
#define UART_INVERT_CTS BIT(2)
|
|
#define UART_INVERT_RTS BIT(3)
|
|
|
|
#define UART_IER_DLAB_IE_EORD BIT(5)
|
|
|
|
#define UART_LCR_WORD_LENGTH_8 0x3
|
|
#define UART_LCR_STOP BIT(2)
|
|
#define UART_LCR_DLAB BIT(7)
|
|
|
|
#define UART_LSR_RDR BIT(0)
|
|
#define UART_LSR_THRE BIT(5)
|
|
#define UART_LSR_TMTY BIT(6)
|
|
#define UART_LSR_FIFOE BIT(7)
|
|
|
|
#define UART_IIR_FCR_EN_FIFO BIT(0)
|
|
#define UART_IIR_FCR_RX_CLR BIT(1)
|
|
#define UART_IIR_FCR_TX_CLR BIT(2)
|
|
|
|
#define UART_IIR_NO_INT BIT(0)
|
|
#define UART_IIR_INT_MASK 0xF
|
|
/* Custom returned interrupt results. Actual interrupts are -1 */
|
|
#define UART_IIR_NOI 0 // No interrupt.
|
|
#define UART_IIR_MSI 1 // Modem status interrupt.
|
|
#define UART_IIR_THRI 2 // Transmitter holding register empty.
|
|
#define UART_IIR_RDI 3 // Receiver data interrupt.
|
|
#define UART_IIR_ERROR 4 // Overrun Error, Parity Error, Framing Error, Break.
|
|
#define UART_IIR_REDI 5 // Receiver end of data interrupt.
|
|
#define UART_IIR_RDTI 7 // Receiver data timeout interrupt.
|
|
|
|
#define UART_MCR_DTR BIT(0)
|
|
#define UART_MCR_RTS BIT(1)
|
|
#define UART_MCR_CTS_EN BIT(5)
|
|
#define UART_MCR_RTS_EN BIT(6)
|
|
|
|
//! TODO: Commented out modes are not supported yet.
|
|
typedef enum _uart_mode_t
|
|
{
|
|
UART_AO_TX_AO_RX = 0,
|
|
//UART_MN_TX_AO_RX = UART_MCR_RTS | UART_MCR_DTR,
|
|
UART_AO_TX_MN_RX = UART_MCR_RTS, // Up to 36 bytes read.
|
|
//UART_MN_TX_AO_RX = UART_MCR_DTR,
|
|
//UART_HW_TX_HW_RX = UART_MCR_RTS_EN | UART_MCR_CTS_EN,
|
|
UART_AO_TX_HW_RX = UART_MCR_RTS_EN,
|
|
//UART_HW_TX_AO_RX = UART_MCR_CTS_EN,
|
|
} uart_mode_t;
|
|
|
|
typedef struct _uart_t
|
|
{
|
|
/* 0x00 */ vu32 UART_THR_DLAB;
|
|
/* 0x04 */ vu32 UART_IER_DLAB;
|
|
/* 0x08 */ vu32 UART_IIR_FCR;
|
|
/* 0x0C */ vu32 UART_LCR;
|
|
/* 0x10 */ vu32 UART_MCR;
|
|
/* 0x14 */ vu32 UART_LSR;
|
|
/* 0x18 */ vu32 UART_MSR;
|
|
/* 0x1C */ vu32 UART_SPR;
|
|
/* 0x20 */ vu32 UART_IRDA_CSR;
|
|
/* 0x24 */ vu32 UART_RX_FIFO_CFG;
|
|
/* 0x28 */ vu32 UART_MIE;
|
|
/* 0x2C */ vu32 UART_VENDOR_STATUS;
|
|
/* 0x30 */ u8 _pad_30[0xC];
|
|
/* 0x3C */ vu32 UART_ASR;
|
|
} uart_t;
|
|
void uart_wait_xfer(u32 idx, u32 which);
|
|
void uart_invert(u32 idx, u32 enable, u32 invert_mask);
|
|
void uart_init(u32 idx, u32 baud, u32 mode);
|
|
void uart_send(u32 idx, const u8 *buf, u32 len); |