Openwrt/target/linux/ipq806x/patches-4.1
Felix Fietkau d523866eb3 ipq806x: add NAND flash controller support
These patches add support for ipq806x NAND flash controller. Most of
these are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/8/3/16

This patch just modifies the kernel code, but doesn't change the config.
It should be harmless.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46568
2015-08-07 08:36:31 +00:00
..
020-add-ap148-bootargs.patch
021-add-ap148-partitions.patch
022-add-db149-dts.patch
023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
024-ap148-add-memory-node.patch
110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch ipq806x: fix freeze in PCIe code when booting with an old u-boot 2015-08-04 23:10:03 +00:00
113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
114-pcie-add-ctlr-init.patch ipq806x: fix freeze in PCIe code when booting with an old u-boot 2015-08-04 23:10:03 +00:00
115-add-pcie-aux-clk-dts.patch ipq806x: fix freeze in PCIe code when booting with an old u-boot 2015-08-04 23:10:03 +00:00
126-add-rpm-to-ipq8064-dts.patch
133-ARM-Add-Krait-L2-register-accessor-functions.patch
134-clk-mux-Split-out-register-accessors-for-reuse.patch
135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch kernel: update 4.1 to 4.1.4 2015-08-05 13:55:14 +00:00
136-clk-Add-safe-switch-hook.patch kernel: update 4.1 to 4.1.4 2015-08-05 13:55:14 +00:00
137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
138-clk-qcom-Add-HFPLL-driver.patch
139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
140-clk-qcom-Add-support-for-Krait-clocks.patch
141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
142-clk-qcom-Add-Krait-clock-controller-driver.patch
143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
145-cpufreq-Add-a-cpufreq-krait-based-on-cpufre.patch
155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch ipq806x: Add ADM support 2015-08-07 08:36:16 +00:00
156-dmaengine-Add-ADM-driver.patch ipq806x: Add ADM support 2015-08-07 08:36:16 +00:00
157-ARM-DT-ipq8064-Add-ADM-device-node.patch ipq806x: Add ADM support 2015-08-07 08:36:16 +00:00
161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
162-mtd-nand-Qualcomm-NAND-controller-driver.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
163-dt-bindings-qcom_nandc-Add-DT-bindings.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
700-clk-qcom-Add-support-for-NSS-GMAC-clocks-and-resets.patch
701-stmmac-add-phy-handle-support-to-the-platform-layer.patch
702-stmmac-move-error-path-at-the-end-of-stmmac_probe_co.patch
703-stmmac-add-fixed-link-device-tree-support.patch
704-stmmac-add-ipq806x-glue-layer.patch
705-net-stmmac-ipq806x-document-device-tree-bindings.patch
707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00
708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch ipq806x: add NAND flash controller support 2015-08-07 08:36:31 +00:00