c7bf2accc9
These are cherry-picked & backported from LKML: *https://lkml.org/lkml/2015/3/17/19 They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are applying changes merged since 3.18; they enable mechanisms used by the ADM driver. ADM engine is used by the NAND controller, so it is necessary to bring-up NAND flash support. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46567
55 lines
1.4 KiB
Diff
55 lines
1.4 KiB
Diff
From 1fb18acab2d71e7e4efd9c10492edb1baf84dcc0 Mon Sep 17 00:00:00 2001
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
Date: Wed, 20 May 2015 15:41:07 +0530
|
|
Subject: [PATCH] ARM: DT: ipq8064: Add ADM device node
|
|
|
|
This patch adds support for the ADM DMA on the IPQ8064 SOC
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 4 ++++
|
|
arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++
|
|
2 files changed, 25 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -90,6 +90,10 @@
|
|
|
|
cs-gpios = <&qcom_pinmux 20 0>;
|
|
|
|
+ dmas = <&adm_dma 6>,
|
|
+ <&adm_dma 5>;
|
|
+ dma-names = "rx", "tx";
|
|
+
|
|
flash: m25p80@0 {
|
|
compatible = "s25fl256s1";
|
|
#address-cells = <1>;
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -595,5 +595,25 @@
|
|
|
|
status = "disabled";
|
|
};
|
|
+
|
|
+ adm_dma: dma@18300000 {
|
|
+ compatible = "qcom,adm";
|
|
+ reg = <0x18300000 0x100000>;
|
|
+ interrupts = <0 170 0>;
|
|
+ #dma-cells = <1>;
|
|
+
|
|
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+
|
|
+ resets = <&gcc ADM0_RESET>,
|
|
+ <&gcc ADM0_PBUS_RESET>,
|
|
+ <&gcc ADM0_C0_RESET>,
|
|
+ <&gcc ADM0_C1_RESET>,
|
|
+ <&gcc ADM0_C2_RESET>;
|
|
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
|
|
+ qcom,ee = <0>;
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
};
|