Openwrt/target/linux/generic/backport-4.19/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch
Russell King 1c16b574c4 kernel: add backported phy/phylink/sfp patches
Backport the phy/phylink/sfp patches currently queued in netdev or in
mainline necessary to support GPON popular modules, specifically to
support Huawei and Nokia GPON modules.

Signed-off-by: Russell King <linux@armlinux.org.uk>
[jonas.gorski: include kernel version in file names, refresh patches]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2020-01-21 22:32:48 +01:00

131 lines
3.7 KiB
Diff

From 0fe72afaa31f98ebd71bd6683fc47021105d0157 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 18 Oct 2019 10:21:46 +0100
Subject: [PATCH 627/660] net: sfp: eliminate mdelay() from PHY probe
Rather than using mdelay() to wait before probing the PHY (which holds
several locks, including the rtnl lock), add an extra wait state to
the state machine to introduce the 50ms delay without holding any
locks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/sfp.c | 52 +++++++++++++++++++++++++++++++++----------
1 file changed, 40 insertions(+), 12 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -52,6 +52,7 @@ enum {
SFP_DEV_UP,
SFP_S_DOWN = 0,
+ SFP_S_WAIT,
SFP_S_INIT,
SFP_S_WAIT_LOS,
SFP_S_LINK_UP,
@@ -108,6 +109,7 @@ static const char *event_to_str(unsigned
static const char * const sm_state_strings[] = {
[SFP_S_DOWN] = "down",
+ [SFP_S_WAIT] = "wait",
[SFP_S_INIT] = "init",
[SFP_S_WAIT_LOS] = "wait_los",
[SFP_S_LINK_UP] = "link_up",
@@ -139,6 +141,7 @@ static const enum gpiod_flags gpio_flags
GPIOD_ASIS,
};
+#define T_WAIT msecs_to_jiffies(50)
#define T_INIT_JIFFIES msecs_to_jiffies(300)
#define T_RESET_US 10
#define T_FAULT_RECOVER msecs_to_jiffies(1000)
@@ -159,9 +162,6 @@ static const enum gpiod_flags gpio_flags
*/
#define SFP_PHY_ADDR 22
-/* Give this long for the PHY to reset. */
-#define T_PHY_RESET_MS 50
-
struct sff_data {
unsigned int gpios;
bool (*module_supported)(const struct sfp_eeprom_id *id);
@@ -1202,8 +1202,6 @@ static void sfp_sm_probe_phy(struct sfp
struct phy_device *phy;
int err;
- msleep(T_PHY_RESET_MS);
-
phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
if (phy == ERR_PTR(-ENODEV)) {
dev_info(sfp->dev, "no PHY detected\n");
@@ -1558,6 +1556,8 @@ static void sfp_sm_module(struct sfp *sf
static void sfp_sm_main(struct sfp *sfp, unsigned int event)
{
+ unsigned long timeout;
+
/* Some events are global */
if (sfp->sm_state != SFP_S_DOWN &&
(sfp->sm_mod_state != SFP_MOD_PRESENT ||
@@ -1575,17 +1575,45 @@ static void sfp_sm_main(struct sfp *sfp,
/* The main state machine */
switch (sfp->sm_state) {
case SFP_S_DOWN:
- if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
- sfp->sm_dev_state == SFP_DEV_UP) {
- sfp_sm_mod_init(sfp);
- sfp_sm_probe_for_phy(sfp);
+ if (sfp->sm_mod_state != SFP_MOD_PRESENT ||
+ sfp->sm_dev_state != SFP_DEV_UP)
+ break;
+
+ sfp_sm_mod_init(sfp);
+
+ /* Initialise the fault clearance retries */
+ sfp->sm_retries = 5;
+
+ /* We need to check the TX_FAULT state, which is not defined
+ * while TX_DISABLE is asserted. The earliest we want to do
+ * anything (such as probe for a PHY) is 50ms.
+ */
+ sfp_sm_next(sfp, SFP_S_WAIT, T_WAIT);
+ break;
+
+ case SFP_S_WAIT:
+ if (event != SFP_E_TIMEOUT)
+ break;
+
+ sfp_sm_probe_for_phy(sfp);
+ if (sfp->state & SFP_F_TX_FAULT) {
/* Wait t_init before indicating that the link is up,
* provided the current state indicates no TX_FAULT. If
* TX_FAULT clears before this time, that's fine too.
*/
- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
- sfp->sm_retries = 5;
+ timeout = T_INIT_JIFFIES;
+ if (timeout > T_WAIT)
+ timeout -= T_WAIT;
+ else
+ timeout = 1;
+
+ sfp_sm_next(sfp, SFP_S_INIT, timeout);
+ } else {
+ /* TX_FAULT is not asserted, assume the module has
+ * finished initialising.
+ */
+ goto init_done;
}
break;
@@ -1593,7 +1621,7 @@ static void sfp_sm_main(struct sfp *sfp,
if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
sfp_sm_fault(sfp, true);
else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
- sfp_sm_link_check_los(sfp);
+ init_done: sfp_sm_link_check_los(sfp);
break;
case SFP_S_WAIT_LOS: