Openwrt build for Asrock G10 Router
Go to file
Rafał Miłecki d369d92fc7 bcm47xx: add support for kernel 5.4
Ethernet, switch, LEDs, buttons, USB, sysupgrade & LuCI were
successfully tested on BCM4706.

WARNING: Hack for BCM4710 adding BCM4710_PROTECTED_FILL_TLB() to the
local_r4k_flush_cache_sigtramp() could not be ported. That function has
been dropped in:
commit adcc81f148d7 ("MIPS: math-emu: Write-protect delay slot emulation pages")
commit 3315b6b336c8 ("MIPS: Delete unused flush_cache_sigtramp()")
it's unsure if that chipset will still work reliably.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-03-10 15:50:55 +01:00
.github build: Update README & github help 2018-07-08 09:41:53 +01:00
config kernel: Use new symbol to deactivate MIPS FPU support 2020-02-28 17:50:46 +01:00
include kernel: bump 5.4 to 5.4.24 2020-03-09 20:43:53 +01:00
package dnsmasq: bump to v2.81rc3 2020-03-10 12:49:07 +00:00
scripts build: Fix directory symlinks not removed when cleaning STAGING_DIR 2020-03-01 21:35:59 +01:00
target bcm47xx: add support for kernel 5.4 2020-03-10 15:50:55 +01:00
toolchain toolchain/binutils: Add binutils 2.34 2020-02-22 16:38:41 +01:00
tools mkrasimage: fix segmentation fault 2020-03-01 21:36:00 +01:00
.gitattributes
.gitignore gitignore: ignore patches in OpenWrt root directory 2019-11-06 00:27:55 +01:00
BSDmakefile
Config.in
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 2018-01-16 16:59:22 +01:00
LICENSE
Makefile build: add buildinfo as single Makefile target 2019-10-17 14:01:33 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org