cddd459140
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
86 lines
3.3 KiB
Diff
86 lines
3.3 KiB
Diff
From c57a0efc17627d0077408544ded02674aefdecae Mon Sep 17 00:00:00 2001
|
|
From: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Date: Mon, 6 Jan 2020 16:59:02 +0200
|
|
Subject: [PATCH] Revert "arm64: dts: LS1028a-rdb: use Ethernet PHY interrupt"
|
|
|
|
This reverts commit 841edb98671cfc4d6f010393ac429c78082ec4bd.
|
|
|
|
There are 2 separate issues with interrupts on the LS1028A-RDB board:
|
|
|
|
1. The GPIO1_DAT25 interrupt line is shared, so there is a real risk of
|
|
race conditions if used in edge-triggered mode, as we currently do.
|
|
This can be illustrated in the following setup:
|
|
- Take 2 LS1028A-RDB boards
|
|
- Connect swp0 to swp0, swp1 to swp1, swp2 to swp2
|
|
- Plug/unplug the power to board 2, 10 times in a row. This will make
|
|
the PHYs lose link simultaneously.
|
|
- Notice that at one point, the net devices on board 1 remain in a
|
|
state where not all the links are down (visible in "ip link"):
|
|
|
|
5: swp0: <BROADCAST,MULTICAST,UP> mtu 1468 qdisc pfifo_fast master br0 state UP mode DEFAULT group default qlen 1000
|
|
link/ether be:97:36:d3:3d:70 brd ff:ff:ff:ff:ff:ff
|
|
6: swp1: <BROADCAST,MULTICAST,UP> mtu 1468 qdisc pfifo_fast master br0 state UP mode DEFAULT group default qlen 1000
|
|
link/ether be:97:36:d3:3d:71 brd ff:ff:ff:ff:ff:ff
|
|
7: swp2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1468 qdisc pfifo_fast master br0 state DOWN mode DEFAULT group default qlen 1000
|
|
link/ether be:97:36:d3:3d:72 brd ff:ff:ff:ff:ff:ff
|
|
|
|
This cannot be solved by making the interrupts level-triggered,
|
|
because the gpio-mpc8xxx controller only supports generating
|
|
edge-triggered interrupts. So the effective reality is that we
|
|
cannot not use shared interrupts connected to the gpio1
|
|
interrupt-parent.
|
|
|
|
2. The uBUS1 and uBUS2 slots that share this interrupt line with the
|
|
Ethernet PHYs are not pulled up by default, they are left floating on
|
|
current revisions of the LS1028A-RDB boards. So sufficient electrical
|
|
noise on these lines will make the CPLD think there's an interrupt
|
|
request, so it asserts the GPIO1_DAT25 signal and leaves it asserted.
|
|
This means that the PHYs on those boards will never have link when
|
|
used in interrupt mode, because their IRQ will be masked by the uBUS
|
|
line that is erroneously kept asserted. In poll mode this issue does
|
|
not occur.
|
|
|
|
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
---
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 10 ----------
|
|
1 file changed, 10 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
@@ -206,8 +206,6 @@
|
|
#size-cells = <0>;
|
|
sgmii_phy0: ethernet-phy@2 {
|
|
reg = <0x2>;
|
|
- interrupt-parent = <&gpio1>;
|
|
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
};
|
|
@@ -219,26 +217,18 @@
|
|
&enetc_mdio_pf3 {
|
|
qsgmii_phy1: ethernet-phy@4 {
|
|
reg = <0x10>;
|
|
- interrupt-parent = <&gpio1>;
|
|
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
qsgmii_phy2: ethernet-phy@5 {
|
|
reg = <0x11>;
|
|
- interrupt-parent = <&gpio1>;
|
|
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
qsgmii_phy3: ethernet-phy@6 {
|
|
reg = <0x12>;
|
|
- interrupt-parent = <&gpio1>;
|
|
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
qsgmii_phy4: ethernet-phy@7 {
|
|
reg = <0x13>;
|
|
- interrupt-parent = <&gpio1>;
|
|
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
};
|
|
|