ath79: Port PowerCloud Systems CAP324 support

The CAP324 was an AP for a NaaS offering that is now defunct.  While
previously supported in the ar71xx arch, there were some errata (to
be fixed shortly).

Notable differences from ar71xx support:

1) The method of getting the ath9k firmware for the PCIe 2ghz wifi has
changed (due to changes in how the arch handles this), since this device
doesn't use the EEPROM except to get the MAC address of the wifi.

2) /etc/config/wireless will need to be regenerated as the path(s) to
the wireless device(s) have changed.

3) ath79 OpenWrt firmware no longer supports build an image that allows
reverting to stock firmware (as the cloud service no longer exists, the
stock firmware is useless), instead using all of the flash for image and
overlay (less u-boot/env and art).

4) Initial network config treats the ethernet port as a Lan port with
the standard default address (192.168.1.1 unless changed in .config
--e.g. via menuconfig) instead of using DHCP (this was the default for
the stock firmware, however for openwrt use this is rather confusion and
counter-productive as the user has a harder time finding the device on
the network.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>

target/linux/ath79/base-files/etc/board.d/01_leds

@@ -29,6 +29,10 @@ case "$board" in
 	ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
 	;;
 
+"pcs,cap324")
+	ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0"
+	;;
+
 "pcs,cr5000")
 	ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
 	;;

target/linux/ath79/base-files/etc/board.d/02_network

@@ -14,6 +14,7 @@ ath79_setup_interfaces()
 		;;
 	"avm,fritz300e"|\
 	"ocedo,raccoon"|\
+	"pcs,cap324"|\
 	"tplink,re450-v2"|\
 	"tplink,tl-mr10u"|\
 	"tplink,tl-wr703n"|\

target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -57,6 +57,7 @@ case "$FIRMWARE" in
 		;;
 	"netgear,wnr612-v2"|\
 	"on,n150r"|\
+	"pcs,cap324"|\
 	"tplink,tl-mr3220-v1"|\
 	"tplink,tl-mr3420-v1"|\
 	"tplink,tl-wr740n-v2"|\

target/linux/ath79/dts/ar9344_pcs_cap324.dts

@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+	model = "PowerCloud Systems CAP324";
+	compatible = "pcs,cap324", "qca,ar9344";
+
+	aliases {
+		serial0 = &uart;
+		led-status = &status;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+                pinctrl-0 = <&jtag_disable_pins>;
+
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_amber {
+			label = "pcs:amber:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		status: power_green {
+			label = "pcs:green:power";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wlan_amber {
+			label = "pcs:amber:wlan";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan_green {
+			label = "pcs:green:wlan";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tpt";
+		};
+
+		lan_amber {
+			label = "pcs:lan:amber";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		lan_green {
+			label = "pcs:lan:green";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi {
+	num-cs = <1>;
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x050000 0x0fa0000>;
+			};
+
+			art: partition@7f0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+
+        ath9k: wifi@168c,0030 {
+		compatible = "168c,0030";
+		reg = <0x0000 0 0 0 0>;
+		mtd-mac-address = <&art 0x0>;
+		mtd-mac-address-increment = <(-2)>;
+		mtd-cal-data = <&art 0x5000>;
+		qca,no-eeprom;
+		qca,disable-5ghz;
+		#gpio-cells = <2>;
+		gpio-controller;
+        };
+};
+
+&wmac {
+	status = "okay";
+
+	qca,disable-2ghz;
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x0>;
+	mtd-mac-address-increment = <(-1)>;
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy-mask = <0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "rgmii";
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	/* default for ar934x, except for 1000M */
+	pll-data = <0x06000000 0x00000101 0x00001616>;
+
+	mtd-mac-address = <&art 0x0>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+};

target/linux/ath79/image/generic.mk

@@ -66,6 +66,15 @@ define Device/openmesh_om5p-ac-v2
 endef
 TARGET_DEVICES += openmesh_om5p-ac-v2
 
+define Device/pcs_cap324
+  ATH_SOC := ar9344
+  DEVICE_TITLE := PowerCloud Systems CAP324
+  IMAGE_SIZE := 16000k
+  IMAGES := sysupgrade.bin
+  SUPPORTED_DEVICES += cap324
+endef
+TARGET_DEVICES += pcs_cap324
+
 define Device/pcs_cr5000
   ATH_SOC := ar9344
   DEVICE_TITLE := PowerCloud Systems CR5000