ath79: add NAND driver for MikroTik RB91xG series
Main part is copied from ar71xx original driver rb91x_nand written by Gabor Juhos <juhosg@openwrt.org>. What is done: * Support of kernel 5.4 and 5.10, * DTS support, * New gpio API (gpiod_*) support. Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
This commit is contained in:
Denis Kalashnikov
Koen Vandeputte
parent
7b8931678c
commit
820e660cd7
375
target/linux/ath79/files/drivers/mtd/nand/raw/rb91x_nand.c
Normal file
375
target/linux/ath79/files/drivers/mtd/nand/raw/rb91x_nand.c
Normal file
@ -0,0 +1,375 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* MikroTik RB91x NAND flash driver
|
||||
*
|
||||
* Main part is copied from original driver written by Gabor Juhos.
|
||||
*
|
||||
* Copyright (C) 2013-2014 Gabor Juhos <juhosg@openwrt.org>
|
||||
*/
|
||||
|
||||
/*
|
||||
* WARNING: to speed up NAND reading/writing we are working with SoC GPIO
|
||||
* controller registers directly -- not through standard GPIO API.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mtd/rawnand.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/version.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
/* Bit masks for NAND data lines in ath79 gpio 32-bit register */
|
||||
#define RB91X_NAND_NRW_BIT BIT(12)
|
||||
#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) \
|
||||
| BIT(13) | BIT(14) | BIT(15))
|
||||
#define RB91X_NAND_LOW_DATA_MASK 0x1f
|
||||
#define RB91X_NAND_HIGH_DATA_MASK 0xe0
|
||||
#define RB91X_NAND_HIGH_DATA_SHIFT 8
|
||||
|
||||
enum rb91x_nand_gpios {
|
||||
RB91X_NAND_READ,/* Read */
|
||||
RB91X_NAND_RDY, /* NAND Ready */
|
||||
RB91X_NAND_NCE, /* Chip Enable. Active low */
|
||||
RB91X_NAND_CLE, /* Command Latch Enable */
|
||||
RB91X_NAND_ALE, /* Address Latch Enable */
|
||||
RB91X_NAND_NRW, /* Read/Write. Active low */
|
||||
RB91X_NAND_NLE, /* Latch Enable. Active low */
|
||||
|
||||
RB91X_NAND_GPIOS,
|
||||
};
|
||||
|
||||
struct rb91x_nand_drvdata {
|
||||
struct nand_chip chip;
|
||||
struct device *dev;
|
||||
struct gpio_desc **gpio;
|
||||
void __iomem *ath79_gpio_base;
|
||||
};
|
||||
|
||||
static inline void rb91x_nand_latch_lock(struct rb91x_nand_drvdata *drvdata,
|
||||
int lock)
|
||||
{
|
||||
gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_NLE], lock);
|
||||
}
|
||||
|
||||
static int rb91x_ooblayout_ecc(struct mtd_info *mtd, int section,
|
||||
struct mtd_oob_region *oobregion)
|
||||
{
|
||||
switch (section) {
|
||||
case 0:
|
||||
oobregion->offset = 8;
|
||||
oobregion->length = 3;
|
||||
return 0;
|
||||
case 1:
|
||||
oobregion->offset = 13;
|
||||
oobregion->length = 3;
|
||||
return 0;
|
||||
default:
|
||||
return -ERANGE;
|
||||
}
|
||||
}
|
||||
|
||||
static int rb91x_ooblayout_free(struct mtd_info *mtd, int section,
|
||||
struct mtd_oob_region *oobregion)
|
||||
{
|
||||
switch (section) {
|
||||
case 0:
|
||||
oobregion->offset = 0;
|
||||
oobregion->length = 4;
|
||||
return 0;
|
||||
case 1:
|
||||
oobregion->offset = 4;
|
||||
oobregion->length = 1;
|
||||
return 0;
|
||||
case 2:
|
||||
oobregion->offset = 6;
|
||||
oobregion->length = 2;
|
||||
return 0;
|
||||
case 3:
|
||||
oobregion->offset = 11;
|
||||
oobregion->length = 2;
|
||||
return 0;
|
||||
default:
|
||||
return -ERANGE;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct mtd_ooblayout_ops rb91x_nand_ecclayout_ops = {
|
||||
.ecc = rb91x_ooblayout_ecc,
|
||||
.free = rb91x_ooblayout_free,
|
||||
};
|
||||
|
||||
static void rb91x_nand_write(struct rb91x_nand_drvdata *drvdata,
|
||||
const u8 *buf,
|
||||
unsigned len)
|
||||
{
|
||||
void __iomem *base = drvdata->ath79_gpio_base;
|
||||
u32 oe_reg;
|
||||
u32 out_reg;
|
||||
u32 out;
|
||||
unsigned i;
|
||||
|
||||
rb91x_nand_latch_lock(drvdata, 1);
|
||||
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* Set data lines to output mode */
|
||||
__raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRW_BIT),
|
||||
base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRW_BIT);
|
||||
for (i = 0; i != len; i++) {
|
||||
u32 data;
|
||||
|
||||
data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) <<
|
||||
RB91X_NAND_HIGH_DATA_SHIFT;
|
||||
data |= buf[i] & RB91X_NAND_LOW_DATA_MASK;
|
||||
data |= out;
|
||||
__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* Deactivate WE line */
|
||||
data |= RB91X_NAND_NRW_BIT;
|
||||
__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
|
||||
/* Flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
}
|
||||
|
||||
/* Restore registers */
|
||||
__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
/* Flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
rb91x_nand_latch_lock(drvdata, 0);
|
||||
}
|
||||
|
||||
static void rb91x_nand_read(struct rb91x_nand_drvdata *drvdata,
|
||||
u8 *read_buf,
|
||||
unsigned len)
|
||||
{
|
||||
void __iomem *base = drvdata->ath79_gpio_base;
|
||||
u32 oe_reg;
|
||||
u32 out_reg;
|
||||
unsigned i;
|
||||
|
||||
/* Enable read mode */
|
||||
gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_READ], 1);
|
||||
|
||||
rb91x_nand_latch_lock(drvdata, 1);
|
||||
|
||||
/* Save registers */
|
||||
oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
||||
out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
/* Set data lines to input mode */
|
||||
__raw_writel(oe_reg | RB91X_NAND_DATA_BITS,
|
||||
base + AR71XX_GPIO_REG_OE);
|
||||
|
||||
for (i = 0; i < len; i++) {
|
||||
u32 in;
|
||||
u8 data;
|
||||
|
||||
/* Activate RE line */
|
||||
__raw_writel(RB91X_NAND_NRW_BIT, base + AR71XX_GPIO_REG_CLEAR);
|
||||
/* Flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
|
||||
|
||||
/* Read input lines */
|
||||
in = __raw_readl(base + AR71XX_GPIO_REG_IN);
|
||||
|
||||
/* Deactivate RE line */
|
||||
__raw_writel(RB91X_NAND_NRW_BIT, base + AR71XX_GPIO_REG_SET);
|
||||
|
||||
data = (in & RB91X_NAND_LOW_DATA_MASK);
|
||||
data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) &
|
||||
RB91X_NAND_HIGH_DATA_MASK;
|
||||
|
||||
read_buf[i] = data;
|
||||
}
|
||||
|
||||
/* Restore registers */
|
||||
__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
|
||||
__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
|
||||
/* Flush write */
|
||||
__raw_readl(base + AR71XX_GPIO_REG_OUT);
|
||||
|
||||
rb91x_nand_latch_lock(drvdata, 0);
|
||||
|
||||
/* Disable read mode */
|
||||
gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_READ], 0);
|
||||
}
|
||||
|
||||
static int rb91x_nand_dev_ready(struct nand_chip *chip)
|
||||
{
|
||||
struct rb91x_nand_drvdata *drvdata = (struct rb91x_nand_drvdata *)(chip->priv);
|
||||
|
||||
return gpiod_get_value_cansleep(drvdata->gpio[RB91X_NAND_RDY]);
|
||||
}
|
||||
|
||||
static void rb91x_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
|
||||
unsigned int ctrl)
|
||||
{
|
||||
struct rb91x_nand_drvdata *drvdata = chip->priv;
|
||||
|
||||
if (ctrl & NAND_CTRL_CHANGE) {
|
||||
gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_CLE],
|
||||
(ctrl & NAND_CLE) ? 1 : 0);
|
||||
gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_ALE],
|
||||
(ctrl & NAND_ALE) ? 1 : 0);
|
||||
gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_NCE],
|
||||
(ctrl & NAND_NCE) ? 1 : 0);
|
||||
}
|
||||
|
||||
if (cmd != NAND_CMD_NONE) {
|
||||
u8 t = cmd;
|
||||
|
||||
rb91x_nand_write(drvdata, &t, 1);
|
||||
}
|
||||
}
|
||||
|
||||
static u8 rb91x_nand_read_byte(struct nand_chip *chip)
|
||||
{
|
||||
u8 data = 0xff;
|
||||
|
||||
rb91x_nand_read(chip->priv, &data, 1);
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static void rb91x_nand_read_buf(struct nand_chip *chip, u8 *buf, int len)
|
||||
{
|
||||
rb91x_nand_read(chip->priv, buf, len);
|
||||
}
|
||||
|
||||
static void rb91x_nand_write_buf(struct nand_chip *chip, const u8 *buf, int len)
|
||||
{
|
||||
rb91x_nand_write(chip->priv, buf, len);
|
||||
}
|
||||
|
||||
static void rb91x_nand_release(struct rb91x_nand_drvdata *drvdata)
|
||||
{
|
||||
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
|
||||
mtd_device_unregister(nand_to_mtd(&drvdata->chip));
|
||||
nand_cleanup(&drvdata->chip);
|
||||
#else
|
||||
nand_release(&drvdata->chip);
|
||||
#endif
|
||||
}
|
||||
|
||||
static int rb91x_nand_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct rb91x_nand_drvdata *drvdata;
|
||||
struct mtd_info *mtd;
|
||||
int r;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct gpio_descs *gpios;
|
||||
|
||||
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
|
||||
if (!drvdata)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, drvdata);
|
||||
|
||||
gpios = gpiod_get_array(dev, NULL, GPIOD_OUT_LOW);
|
||||
if (IS_ERR(gpios)) {
|
||||
dev_err(dev, "failed to get gpios: %d\n", (int)gpios);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (gpios->ndescs != RB91X_NAND_GPIOS) {
|
||||
dev_err(dev, "expected %d gpios\n", RB91X_NAND_GPIOS);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
drvdata->gpio = gpios->desc;
|
||||
|
||||
gpiod_direction_input(drvdata->gpio[RB91X_NAND_RDY]);
|
||||
|
||||
drvdata->ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
|
||||
|
||||
drvdata->dev = dev;
|
||||
|
||||
drvdata->chip.priv = drvdata;
|
||||
|
||||
drvdata->chip.legacy.cmd_ctrl = rb91x_nand_cmd_ctrl;
|
||||
drvdata->chip.legacy.dev_ready = rb91x_nand_dev_ready;
|
||||
drvdata->chip.legacy.read_byte = rb91x_nand_read_byte;
|
||||
drvdata->chip.legacy.write_buf = rb91x_nand_write_buf;
|
||||
drvdata->chip.legacy.read_buf = rb91x_nand_read_buf;
|
||||
|
||||
drvdata->chip.legacy.chip_delay = 25;
|
||||
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,9,0)
|
||||
drvdata->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
|
||||
drvdata->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
|
||||
#else
|
||||
drvdata->chip.ecc.mode = NAND_ECC_SOFT;
|
||||
drvdata->chip.ecc.algo = NAND_ECC_HAMMING;
|
||||
#endif
|
||||
drvdata->chip.options = NAND_NO_SUBPAGE_WRITE;
|
||||
|
||||
r = nand_scan(&drvdata->chip, 1);
|
||||
if (r) {
|
||||
dev_err(dev, "nand_scan() failed: %d\n", r);
|
||||
return r;
|
||||
}
|
||||
|
||||
mtd = nand_to_mtd(&drvdata->chip);
|
||||
mtd->dev.parent = dev;
|
||||
mtd_set_of_node(mtd, dev->of_node);
|
||||
mtd->owner = THIS_MODULE;
|
||||
if (mtd->writesize == 512)
|
||||
mtd_set_ooblayout(mtd, &rb91x_nand_ecclayout_ops);
|
||||
|
||||
r = mtd_device_register(mtd, NULL, 0);
|
||||
if (r) {
|
||||
dev_err(dev, "mtd_device_register() failed: %d\n",
|
||||
r);
|
||||
goto err_release_nand;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_release_nand:
|
||||
rb91x_nand_release(drvdata);
|
||||
return r;
|
||||
}
|
||||
|
||||
static int rb91x_nand_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct rb91x_nand_drvdata *drvdata = platform_get_drvdata(pdev);
|
||||
|
||||
rb91x_nand_release(drvdata);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id rb91x_nand_match[] = {
|
||||
{ .compatible = "mikrotik,rb91x-nand" },
|
||||
{},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, rb91x_nand_match);
|
||||
|
||||
static struct platform_driver rb91x_nand_driver = {
|
||||
.probe = rb91x_nand_probe,
|
||||
.remove = rb91x_nand_remove,
|
||||
.driver = {
|
||||
.name = "rb91x-nand",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = rb91x_nand_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(rb91x_nand_driver);
|
||||
|
||||
MODULE_DESCRIPTION("MikrotTik RB91x NAND flash driver");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
||||
MODULE_AUTHOR("Denis Kalashnikov <denis281089@gmail.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
@ -15,6 +15,7 @@ CONFIG_MTD_NAND_AR934X=y
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_RB4XX=y
|
||||
CONFIG_MTD_NAND_RB91X=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_ROUTERBOOT_PARTS=y
|
||||
CONFIG_MTD_SPI_NAND=y
|
||||
|
||||
@ -24,3 +24,26 @@
|
||||
obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o
|
||||
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
|
||||
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
|
||||
--- a/drivers/mtd/nand/raw/Kconfig
|
||||
+++ b/drivers/mtd/nand/raw/Kconfig
|
||||
@@ -571,4 +571,10 @@ config MTD_NAND_RB4XX
|
||||
Enables support for the NAND flash chip on Mikrotik Routerboard
|
||||
RB4xx series.
|
||||
|
||||
+config MTD_NAND_RB91X
|
||||
+ tristate "MikroTik RB91x NAND driver support"
|
||||
+ depends on ATH79 && MTD_RAW_NAND
|
||||
+ help
|
||||
+ Enables support for the NAND flash chip on MikroTik RB91x series.
|
||||
+
|
||||
endif # MTD_RAW_NAND
|
||||
--- a/drivers/mtd/nand/raw/Makefile
|
||||
+++ b/drivers/mtd/nand/raw/Makefile
|
||||
@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_CADENCE) += caden
|
||||
obj-$(CONFIG_MTD_NAND_ARASAN) += arasan-nand-controller.o
|
||||
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
|
||||
|
||||
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
|
||||
nand-objs += nand_onfi.o
|
||||
|
||||
@ -1,3 +1,24 @@
|
||||
--- a/drivers/mtd/nand/raw/Kconfig
|
||||
+++ b/drivers/mtd/nand/raw/Kconfig
|
||||
@@ -559,4 +559,8 @@ config MTD_NAND_RB4XX
|
||||
Enables support for the NAND flash chip on Mikrotik Routerboard
|
||||
RB4xx series.
|
||||
|
||||
+config MTD_NAND_RB91X
|
||||
+ tristate "MikroTik RB91x NAND driver support"
|
||||
+ depends on ATH79 && MTD_RAW_NAND
|
||||
+
|
||||
endif # MTD_RAW_NAND
|
||||
--- a/drivers/mtd/nand/raw/Makefile
|
||||
+++ b/drivers/mtd/nand/raw/Makefile
|
||||
@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm
|
||||
obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
|
||||
|
||||
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
|
||||
nand-objs += nand_onfi.o
|
||||
--- a/drivers/gpio/Kconfig
|
||||
+++ b/drivers/gpio/Kconfig
|
||||
@@ -130,6 +130,10 @@ config GPIO_ATH79
|
||||
|
||||
Loading…
Reference in New Issue
Block a user