71 lines
1.7 KiB
C
71 lines
1.7 KiB
C
//
|
|
// FILE: dht.h
|
|
// AUTHOR: Rob Tillaart
|
|
// VERSION: 0.1.14
|
|
// PURPOSE: DHT Temperature & Humidity Sensor library for Arduino
|
|
// URL: http://arduino.cc/playground/Main/DHTLib
|
|
//
|
|
// HISTORY:
|
|
// see dht.cpp file
|
|
//
|
|
|
|
#ifndef dht_h
|
|
#define dht_h
|
|
|
|
// #if ARDUINO < 100
|
|
// #include <WProgram.h>
|
|
// #else
|
|
// #include <Arduino.h>
|
|
// #endif
|
|
#include <stdint.h>
|
|
|
|
#define DHT_LIB_VERSION "0.1.14"
|
|
|
|
#define DHTLIB_OK 0
|
|
#define DHTLIB_ERROR_CHECKSUM -1
|
|
#define DHTLIB_ERROR_TIMEOUT -2
|
|
#define DHTLIB_INVALID_VALUE -999
|
|
|
|
#define DHTLIB_DHT11_WAKEUP 18
|
|
#define DHTLIB_DHT_WAKEUP 1
|
|
#define DHTLIB_DHT_UNI_WAKEUP 18
|
|
|
|
#define DHT_DEBUG
|
|
|
|
// max timeout is 100 usec.
|
|
// For a 16 Mhz proc 100 usec is 1600 clock cycles
|
|
// loops using DHTLIB_TIMEOUT use at least 4 clock cycli
|
|
// so 100 us takes max 400 loops
|
|
// so by dividing F_CPU by 40000 we "fail" as fast as possible
|
|
// ESP8266 uses delay_us get 1us time
|
|
#define DHTLIB_TIMEOUT (100)
|
|
|
|
// Platform specific I/O definitions
|
|
|
|
#define DIRECT_READ(pin) (0x1 & GPIO_INPUT_GET(GPIO_ID_PIN(pin_num[pin])))
|
|
#define DIRECT_MODE_INPUT(pin) GPIO_DIS_OUTPUT(pin_num[pin])
|
|
#define DIRECT_MODE_OUTPUT(pin)
|
|
#define DIRECT_WRITE_LOW(pin) (GPIO_OUTPUT_SET(GPIO_ID_PIN(pin_num[pin]), 0))
|
|
#define DIRECT_WRITE_HIGH(pin) (GPIO_OUTPUT_SET(GPIO_ID_PIN(pin_num[pin]), 1))
|
|
|
|
// return values:
|
|
// DHTLIB_OK
|
|
// DHTLIB_ERROR_CHECKSUM
|
|
// DHTLIB_ERROR_TIMEOUT
|
|
int dht_read_universal(uint8_t pin);
|
|
int dht_read11(uint8_t pin);
|
|
int dht_read(uint8_t pin);
|
|
|
|
int dht_read21(uint8_t pin);
|
|
int dht_read22(uint8_t pin);
|
|
int dht_read33(uint8_t pin);
|
|
int dht_read44(uint8_t pin);
|
|
|
|
double dht_getHumidity(void);
|
|
double dht_getTemperature(void);
|
|
|
|
#endif
|
|
//
|
|
// END OF FILE
|
|
//
|