local empty = { } local read_write = {read_only = false} stds.nodemcu_libs = { read_globals = { adc = { fields = { INIT_ADC = empty, INIT_VDD33 = empty, force_init_mode = empty, read = empty, readvdd33 = empty } }, ads1115 = { fields = { ADDR_GND = empty, ADDR_SCL = empty, ADDR_SDA = empty, ADDR_VDD = empty, CMODE_TRAD = empty, CMODE_WINDOW = empty, COMP_1CONV = empty, COMP_2CONV = empty, COMP_4CONV = empty, CONTINUOUS = empty, CONV_RDY_1 = empty, CONV_RDY_2 = empty, CONV_RDY_4 = empty, DIFF_0_1 = empty, DIFF_0_3 = empty, DIFF_1_3 = empty, DIFF_2_3 = empty, DR_128SPS = empty, DR_1600SPS = empty, DR_16SPS = empty, DR_2400SPS = empty, DR_250SPS = empty, DR_32SPS = empty, DR_3300SPS = empty, DR_475SPS = empty, DR_490SPS = empty, DR_64SPS = empty, DR_860SPS = empty, DR_8SPS = empty, DR_920SPS = empty, GAIN_0_256V = empty, GAIN_0_512V = empty, GAIN_1_024V = empty, GAIN_2_048V = empty, GAIN_4_096V = empty, GAIN_6_144V = empty, SINGLE_0 = empty, SINGLE_1 = empty, SINGLE_2 = empty, SINGLE_3 = empty, SINGLE_SHOT = empty, ads1015 = empty, ads1115 = empty, read = empty, reset = empty, } }, adxl345 = { fields = { read = empty, setup = empty } }, am2320 = { fields = { read = empty, setup = empty } }, apa102 = { fields = { write = empty } }, bit = { fields = { arshift = empty, band = empty, bit = empty, bnot = empty, bor = empty, bxor = empty, clear = empty, isclear = empty, isset = empty, lshift = empty, rshift = empty, set = empty } }, bloom = { fields = { create = empty } }, bme280 = { fields = { altitude = empty, baro = empty, dewpoint = empty, humi = empty, qfe2qnh = empty, read = empty, setup = empty, startreadout = empty, temp = empty } }, bme280_math = { fields = { altitude = empty, dewpoint = empty, qfe2qnh = empty, read = empty, setup = empty } }, bme680 = { fields = { altitude = empty, dewpoint = empty, qfe2qnh = empty, read = empty, setup = empty, startreadout = empty } }, bmp085 = { fields = { pressure = empty, pressure_raw = empty, setup = empty, temperature = empty } }, coap = { fields = { CON = empty, Client = empty, EXI = empty, JSON = empty, LINKFORMAT = empty, NON = empty, OCTET_STREAM = empty, Server = empty, TEXT_PLAIN = empty, XML = empty } }, color_utils = { fields = { colorWheel = empty, grb2hsv = empty, hsv2grb = empty, hsv2grbw = empty } }, cron = { fields = { reset = empty, schedule = empty } }, crypto = { fields = { decrypt = empty, encrypt = empty, fhash = empty, hash = empty, hmac = empty, mask = empty, new_hash = empty, new_hmac = empty, sha1 = empty, toBase64 = empty, toHex = empty } }, dcc = { fields = { CV_READ = empty, CV_RESET = empty, CV_VALID = empty, CV_WRITE = empty, DCC_ACCESSORY = empty, DCC_FUNC = empty, DCC_IDLE = empty, DCC_RAW = empty, DCC_RESET = empty, DCC_SERVICEMODE = empty, DCC_SPEED = empty, DCC_SPEED_RAW = empty, DCC_TURNOUT = empty, FLAGS_AUTO_FACTORY_DEFAULT = empty, FLAGS_DCC_ACCESSORY_DECODER = empty, FLAGS_MY_ADDRESS_ONLY = empty, FLAGS_OUTPUT_ADDRESS_MODE = empty, MAN_ID_DIY = empty, MAN_ID_JMRI = empty, MAN_ID_SILICON_RAILWAY = empty, close = empty, setup = empty } }, dht = { fields = { ERROR_CHECKSUM = empty, ERROR_TIMEOUT = empty, OK = empty, read = empty, read11 = empty, readxx = empty } }, encoder = { fields = { fromBase64 = empty, fromHex = empty, toBase64 = empty, toHex = empty } }, enduser_setup = { fields = { manual = empty, start = empty, stop = empty } }, file = { fields = { chdir = empty, close = empty, exists = empty, flush = empty, format = empty, fscfg = empty, fsinfo = empty, getcontents = empty, list = empty, mount = empty, n = empty, on = empty, open = empty, putcontents = empty, read = empty, readline = empty, remove = empty, rename = empty, seek = empty, stat = empty, write = empty, writeline = empty } }, gdbstub = { fields = { brk = empty, gdboutput = empty, open = empty } }, gpio = { fields = { FLOAT = empty, HIGH = empty, INPUT = empty, INT = empty, LOW = empty, OPENDRAIN = empty, OUTPUT = empty, PULLUP = empty, mode = empty, read = empty, serout = empty, trig = empty, write = empty, pulse = { fields = { adjust = empty, cancel = empty, getstate = empty, start = empty, stop = empty, update = empty } } } }, hdc1080 = { fields = { read = empty, setup = empty } }, hmc5883 = { fields = { read = empty, setup = empty } }, http = { fields = { ERROR = empty, OK = empty, delete = empty, get = empty, post = empty, put = empty, request = empty } }, hx711 = { fields = { init = empty, read = empty } }, i2c = { fields = { FAST = empty, FASTPLUS = empty, RECEIVER = empty, SLOW = empty, TRANSMITTER = empty, address = empty, read = empty, setup = empty, start = empty, stop = empty, write = empty } }, l3g4200d = { fields = { read = empty, setup = empty } }, mcp4725 = { fields = { PWRDN_100K = empty, PWRDN_1K = empty, PWRDN_500K = empty, PWRDN_NONE = empty, read = empty, write = empty } }, mdns = { fields = { close = empty, register = empty } }, mqtt = { fields = { CONNACK_ACCEPTED = empty, CONNACK_REFUSED_BAD_USER_OR_PASS = empty, CONNACK_REFUSED_ID_REJECTED = empty, CONNACK_REFUSED_NOT_AUTHORIZED = empty, CONNACK_REFUSED_PROTOCOL_VER = empty, CONNACK_REFUSED_SERVER_UNAVAILABLE = empty, CONN_FAIL_DNS = empty, CONN_FAIL_NOT_A_CONNACK_MSG = empty, CONN_FAIL_SERVER_NOT_FOUND = empty, CONN_FAIL_TIMEOUT_RECEIVING = empty, CONN_FAIL_TIMEOUT_SENDING = empty, Client = empty } }, net = { fields = { TCP = empty, UDP = empty, cert = empty, createConnection = empty, createServer = empty, createUDPSocket = empty, dns = { fields = { getdnsserver = empty, resolve = empty, setdnsserver = empty } }, ifinfo = empty, multicastJoin = empty, multicastLeave = empty } }, node = { fields = { CPU160MHZ = empty, CPU80MHZ = empty, bootreason = empty, chipid = empty, compile = empty, dsleep = empty, dsleepMax = empty, dsleepsetoption = empty, flashid = empty, flashindex = empty, flashreload = empty, flashsize = empty, getcpufreq = empty, getpartitiontable = empty, heap = empty, info = empty, input = empty, osprint = empty, output = empty, random = empty, readrcr = empty, readvdd33 = empty, restart = empty, restore = empty, setcpufreq = empty, setpartitiontable = empty, sleep = empty, stripdebug = empty, writercr = empty, egc = { fields = { setmode = empty, meminfo = empty } }, task = { fields = { post = empty, LOW_PRIORITY = empty, MEDIUM_PRIORITY = empty, HIGH_PRIORITY = empty } }, LFS = { read_only = true, fields = { config = empty, get = empty, list = empty, reload = empty, time = empty } } } }, ow = { fields = { check_crc16 = empty, crc16 = empty, crc8 = empty, depower = empty, read = empty, read_bytes = empty, reset = empty, reset_search = empty, search = empty, select = empty, setup = empty, skip = empty, target_search = empty, write = empty, write_bytes = empty } }, pcm = { fields = { RATE_10K = empty, RATE_12K = empty, RATE_16K = empty, RATE_1K = empty, RATE_2K = empty, RATE_4K = empty, RATE_5K = empty, RATE_8K = empty, SD = empty, new = empty } }, pwm = { fields = { close = empty, getclock = empty, getduty = empty, setclock = empty, setduty = empty, setup = empty, start = empty, stop = empty } }, pwm2 = { fields = { get_pin_data = empty, get_timer_data = empty, release_pin = empty, set_duty = empty, setup_pin_hz = empty, setup_pin_sec = empty, start = empty, stop = empty, } }, rc = { fields = { send = empty } }, rfswitch = { fields = { send = empty } }, rotary = { fields = { ALL = empty, CLICK = empty, DBLCLICK = empty, LONGPRESS = empty, PRESS = empty, RELEASE = empty, TURN = empty, close = empty, getpos = empty, on = empty, setup = empty } }, rtcfifo = { fields = { count = empty, drop = empty, dsleep_until_sample = empty, peek = empty, pop = empty, prepare = empty, put = empty, ready = empty } }, rtcmem = { fields = { read32 = empty, write32 = empty } }, rtctime = { fields = { adjust_delta = empty, dsleep = empty, dsleep_aligned = empty, epoch2cal = empty, get = empty, set = empty } }, si7021 = { fields = { HEATER_DISABLE = empty, HEATER_ENABLE = empty, RH08_TEMP12 = empty, RH10_TEMP13 = empty, RH11_TEMP11 = empty, RH12_TEMP14 = empty, firmware = empty, read = empty, serial = empty, setting = empty, setup = empty } }, sigma_delta = { fields = { close = empty, setprescale = empty, setpwmduty = empty, settarget = empty, setup = empty } }, sjson = { fields = { decode = empty, decoder = empty, encode = empty, encoder = empty } }, sntp = { fields = { getoffset = empty, setoffset = empty, sync = empty } }, somfy = { fields = { DOWN = empty, PROG = empty, STOP = empty, UP = empty, sendcommand = empty } }, spi = { fields = { CPHA_HIGH = empty, CPHA_LOW = empty, CPOL_HIGH = empty, CPOL_LOW = empty, DATABITS_8 = empty, FULLDUPLEX = empty, HALFDUPLEX = empty, MASTER = empty, SLAVE = empty, get_miso = empty, recv = empty, send = empty, set_clock_div = empty, set_mosi = empty, setup = empty, transaction = empty } }, struct = { fields = { pack = empty, size = empty, unpack = empty } }, switec = { fields = { close = empty, dequeue = empty, getpos = empty, moveto = empty, reset = empty, setup = empty } }, tcs34725 = { fields = { disable = empty, enable = empty, raw = empty, setGain = empty, setIntegrationTime = empty, setup = empty } }, tls = { fields = { createConnection = empty, setDebug = empty, cert = { fields = { auth = empty, verify = empty } } } }, tm1829 = { fields = { write = empty } }, tmr = { fields = { ALARM_AUTO = empty, ALARM_SEMI = empty, ALARM_SINGLE = empty, create = empty, delay = empty, now = empty, resume_all = empty, softwd = empty, suspend_all = empty, time = empty, wdclr = empty } }, tsl2561 = { fields = { ADDRESS_FLOAT = empty, ADDRESS_GND = empty, ADDRESS_VDD = empty, GAIN_16X = empty, GAIN_1X = empty, INTEGRATIONTIME_101MS = empty, INTEGRATIONTIME_13MS = empty, INTEGRATIONTIME_402MS = empty, PACKAGE_CS = empty, PACKAGE_T_FN_CL = empty, TSL2561_ERROR_I2CBUSY = empty, TSL2561_ERROR_I2CINIT = empty, TSL2561_ERROR_LAST = empty, TSL2561_ERROR_NOINIT = empty, TSL2561_OK = empty, getlux = empty, getrawchannels = empty, init = empty, settiming = empty } }, -- There would be too many fields for all the fonts and displays u8g2 = {other_fields = true}, uart = { fields = { PARITY_EVEN = empty, PARITY_NONE = empty, PARITY_ODD = empty, STOPBITS_1 = empty, STOPBITS_1_5 = empty, STOPBITS_2 = empty, alt = empty, getconfig = empty, on = empty, setup = empty, write = empty } }, -- There would be too many fields for all the fonts and displays ucg = {other_fields = true}, websocket = { fields = { createClient = empty } }, wiegand = { fields = { create = empty } }, wifi = { fields = { COUNTRY_AUTO = empty, COUNTRY_MANUAL = empty, LIGHT_SLEEP = empty, MODEM_SLEEP = empty, NONE_SLEEP = empty, NULLMODE = empty, OPEN = empty, PHYMODE_B = empty, PHYMODE_G = empty, PHYMODE_N = empty, SOFTAP = empty, STATION = empty, STATIONAP = empty, STA_APNOTFOUND = empty, STA_CONNECTING = empty, STA_FAIL = empty, STA_GOTIP = empty, STA_IDLE = empty, STA_WRONGPWD = empty, WEP = empty, WPA2_PSK = empty, WPA_PSK = empty, WPA_WPA2_PSK = empty, getchannel = empty, getcountry = empty, getdefaultmode = empty, getmode = empty, getphymode = empty, nullmodesleep = empty, resume = empty, setcountry = empty, setmaxtxpower = empty, setmode = empty, setphymode = empty, sleeptype = empty, startsmart = empty, stopsmart = empty, suspend = empty, sta = { fields = { autoconnect = empty, changeap = empty, clearconfig = empty, config = empty, connect = empty, disconnect = empty, getap = empty, getapindex = empty, getapinfo = empty, getbroadcast = empty, getconfig = empty, getdefaultconfig = empty, gethostname = empty, getip = empty, getmac = empty, getrssi = empty, setaplimit = empty, sethostname = empty, setip = empty, setmac = empty, sleeptype = empty, status = empty } }, ap = { fields = { config = empty, deauth = empty, getbroadcast = empty, getclient = empty, getconfig = empty, getdefaultconfig = empty, getip = empty, getmac = empty, setip = empty, setmac = empty, dhcp = { fields = { config = empty, start = empty, stop = empty } }, } }, eventmon = { fields = { AP_PROBEREQRECVED = empty, AP_STACONNECTED = empty, AP_STADISCONNECTED = empty, EVENT_MAX = empty, STA_AUTHMODE_CHANGE = empty, STA_CONNECTED = empty, STA_DHCP_TIMEOUT = empty, STA_DISCONNECTED = empty, STA_GOT_IP = empty, WIFI_MODE_CHANGED = empty, register = empty, unregister = empty, reason = { fields = { ["4WAY_HANDSHAKE_TIMEOUT"] = empty, ["802_1X_AUTH_FAILED"] = empty, AKMP_INVALID = empty, ASSOC_EXPIRE = empty, ASSOC_FAIL = empty, ASSOC_LEAVE = empty, ASSOC_NOT_AUTHED = empty, ASSOC_TOOMANY = empty, AUTH_EXPIRE = empty, AUTH_FAIL = empty, AUTH_LEAVE = empty, BEACON_TIMEOUT = empty, CIPHER_SUITE_REJECTED = empty, DISASSOC_PWRCAP_BAD = empty, DISASSOC_SUPCHAN_BAD = empty, GROUP_CIPHER_INVALID = empty, GROUP_KEY_UPDATE_TIMEOUT = empty, HANDSHAKE_TIMEOUT = empty, IE_INVALID = empty, IE_IN_4WAY_DIFFERS = empty, INVALID_RSN_IE_CAP = empty, MIC_FAILURE = empty, NOT_ASSOCED = empty, NOT_AUTHED = empty, NO_AP_FOUND = empty, PAIRWISE_CIPHER_INVALID = empty, UNSPECIFIED = empty, UNSUPP_RSN_IE_VERSION = empty } } } }, monitor = { fields = { channel = empty, start = empty, stop = empty } } } }, wps = { fields = { FAILED = empty, SCAN_ERR = empty, SUCCESS = empty, TIMEOUT = empty, WEP = empty, disable = empty, enable = empty, start = empty } }, ws2801 = { fields = { init = empty, write = empty } }, ws2812 = { fields = { FADE_IN = empty, FADE_OUT = empty, MODE_DUAL = empty, MODE_SINGLE = empty, SHIFT_CIRCULAR = empty, SHIFT_LOGICAL = empty, init = empty, newBuffer = empty, write = empty } }, ws2812_effects = { fields = { get_delay = empty, get_speed = empty, init = empty, set_brightness = empty, set_color = empty, set_delay = empty, set_mode = empty, set_speed = empty, start = empty, stop = empty } }, xpt2046 = { fields = { getPosition = empty, getPositionAvg = empty, getRaw = empty, init = empty, isTouched = empty, setCalibration = empty } }, pack = empty, unpack = empty, size = empty, package = {fields = {seeall = read_write}}, _ENV = empty } } std = "lua51+nodemcu_libs"