114 lines
2.9 KiB
C
114 lines
2.9 KiB
C
|
#include "module.h"
|
||
|
|
#include "lauxlib.h"
|
||
|
|
#include "platform.h"
|
||
|
|
#include <stdlib.h>
|
||
|
|
#include <string.h>
|
||
|
|
#include "user_interface.h"
|
||
|
|
|
||
|
|
static inline uint32_t _getCycleCount(void) {
|
||
|
|
uint32_t cycles;
|
||
|
|
__asm__ __volatile__("rsr %0,ccount":"=a" (cycles));
|
||
|
|
return cycles;
|
||
|
|
}
|
||
|
|
|
||
|
|
// This algorithm reads the cpu clock cycles to calculate the correct
|
||
|
|
// pulse widths. It works in both 80 and 160 MHz mode.
|
||
|
|
static void ICACHE_RAM_ATTR tm1829_write_to_pin(uint8_t pin, uint8_t *pixels, uint32_t length) {
|
||
|
|
uint8_t *p, *end;
|
||
|
|
|
||
|
|
p = pixels;
|
||
|
|
end = p + length;
|
||
|
|
|
||
|
|
const uint32_t t0l = (1000 * system_get_cpu_freq()) / 3333; // 0.390us (spec=0.35 +- 0.15)
|
||
|
|
const uint32_t t1l = (1000 * system_get_cpu_freq()) / 1250; // 0.800us (spec=0.70 +- 0.15)
|
||
|
|
|
||
|
|
const uint32_t ttot = (1000 * system_get_cpu_freq()) / 800; // 1.25us
|
||
|
|
|
||
|
|
while (p != end) {
|
||
|
|
register int i;
|
||
|
|
|
||
|
|
register uint8_t pixel = *p++;
|
||
|
|
|
||
|
|
ets_intr_lock();
|
||
|
|
|
||
|
|
for (i = 7; i >= 0; i--) {
|
||
|
|
register uint32_t pin_mask = 1 << pin;
|
||
|
|
|
||
|
|
// Select low time
|
||
|
|
register uint32_t tl = ((pixel >> i) & 1) ? t1l : t0l;
|
||
|
|
register uint32_t t1, t2;
|
||
|
|
|
||
|
|
register uint32_t t = _getCycleCount();
|
||
|
|
|
||
|
|
t1 = t + tl;
|
||
|
|
t2 = t + ttot;
|
||
|
|
|
||
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pin_mask); // Set pin low
|
||
|
|
while (_getCycleCount() < t1);
|
||
|
|
|
||
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, pin_mask); // Set pin high
|
||
|
|
while (_getCycleCount() < t2);
|
||
|
|
}
|
||
|
|
|
||
|
|
ets_intr_unlock();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
// Lua: tm1829.write(pin, "string")
|
||
|
|
// Byte triples in the string are interpreted as R G B values and sent to the hardware as G R B.
|
||
|
|
// WARNING: this function scrambles the input buffer :
|
||
|
|
// a = string.char(255,0,128)
|
||
|
|
// tm1829.write(3,a)
|
||
|
|
// =a.byte()
|
||
|
|
// (0,255,128)
|
||
|
|
static int ICACHE_FLASH_ATTR tm1829_write(lua_State* L)
|
||
|
|
{
|
||
|
|
const uint8_t pin = luaL_checkinteger(L, 1);
|
||
|
|
size_t length;
|
||
|
|
const char *rgb = luaL_checklstring(L, 2, &length);
|
||
|
|
|
||
|
|
// dont modify lua-internal lstring - make a copy instead
|
||
|
|
char *buffer = (char *)malloc(length);
|
||
|
|
|
||
|
|
// Ignore incomplete Byte triples at the end of buffer
|
||
|
|
length -= length % 3;
|
||
|
|
|
||
|
|
// Copy payload and make sure first byte is < 0xFF (triggers
|
||
|
|
// constant current command, instead of PWM duty command)
|
||
|
|
size_t i;
|
||
|
|
for (i = 0; i < length; i += 3) {
|
||
|
|
buffer[i] = rgb[i];
|
||
|
|
buffer[i + 1] = rgb[i + 1];
|
||
|
|
buffer[i + 2] = rgb[i + 2];
|
||
|
|
|
||
|
|
// Check for first byte
|
||
|
|
if (buffer[i] == 0xff)
|
||
|
|
buffer[i] = 0xfe;
|
||
|
|
}
|
||
|
|
|
||
|
|
// Initialize the output pin and wait a bit
|
||
|
|
platform_gpio_mode(pin, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT);
|
||
|
|
platform_gpio_write(pin, 1);
|
||
|
|
|
||
|
|
// Send the buffer
|
||
|
|
tm1829_write_to_pin(pin_num[pin], (uint8_t*) buffer, length);
|
||
|
|
|
||
|
|
os_delay_us(500); // reset time
|
||
|
|
|
||
|
|
free(buffer);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
LROT_BEGIN(tm1829, NULL, 0)
|
||
|
|
LROT_FUNCENTRY( write, tm1829_write )
|
||
|
|
LROT_END(tm1829, NULL, 0)
|
||
|
|
|
||
|
|
|
||
|
|
int luaopen_tm1829(lua_State *L) {
|
||
|
|
// TODO: Make sure that the GPIO system is initialized
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
NODEMCU_MODULE(TM1829, "tm1829", tm1829, luaopen_tm1829);
|