392 lines
12 KiB
C
392 lines
12 KiB
C
|
/******************************************************************************
|
||
|
* Copyright 2013-2014 Espressif Systems (Wuxi)
|
||
|
*
|
||
|
* FileName: uart.c
|
||
|
*
|
||
|
* Description: Two UART mode configration and interrupt handler.
|
||
|
* Check your hardware connection while use this mode.
|
||
|
*
|
||
|
* Modification history:
|
||
|
* 2014/3/12, v1.0 create this file.
|
||
|
*******************************************************************************/
|
||
|
#include "ets_sys.h"
|
||
|
#include "osapi.h"
|
||
|
#include "driver/uart.h"
|
||
|
#include "platform.h"
|
||
|
#include "user_config.h"
|
||
|
#include "user_interface.h"
|
||
|
#include "osapi.h"
|
||
|
|
||
|
#define UART0 0
|
||
|
#define UART1 1
|
||
|
|
||
|
#ifndef FUNC_U0RXD
|
||
|
#define FUNC_U0RXD 0
|
||
|
#endif
|
||
|
#ifndef FUNC_U0CTS
|
||
|
#define FUNC_U0CTS 4
|
||
|
#endif
|
||
|
|
||
|
|
||
|
// For event signalling
|
||
|
static platform_task_handle_t sig = 0;
|
||
|
static uint8 *sig_flag;
|
||
|
static uint8 isr_flag = 0;
|
||
|
|
||
|
// UartDev is defined and initialized in rom code.
|
||
|
extern UartDevice UartDev;
|
||
|
#ifdef BIT_RATE_AUTOBAUD
|
||
|
static os_timer_t autobaud_timer;
|
||
|
#endif
|
||
|
static void (*alt_uart0_tx)(char txchar);
|
||
|
|
||
|
LOCAL void ICACHE_RAM_ATTR
|
||
|
uart0_rx_intr_handler(void *para);
|
||
|
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart_wait_tx_empty
|
||
|
* Description : Internal used function
|
||
|
* Wait for TX FIFO to become empty.
|
||
|
* Parameters : uart_no, use UART0 or UART1 defined ahead
|
||
|
* Returns : NONE
|
||
|
*******************************************************************************/
|
||
|
LOCAL void ICACHE_FLASH_ATTR
|
||
|
uart_wait_tx_empty(uint8 uart_no)
|
||
|
{
|
||
|
while ((READ_PERI_REG(UART_STATUS(uart_no)) & (UART_TXFIFO_CNT<<UART_TXFIFO_CNT_S)) > 0)
|
||
|
;
|
||
|
}
|
||
|
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart_config
|
||
|
* Description : Internal used function
|
||
|
* UART0 used for data TX/RX, RX buffer size is 0x100, interrupt enabled
|
||
|
* UART1 just used for debug output
|
||
|
* Parameters : uart_no, use UART0 or UART1 defined ahead
|
||
|
* Returns : NONE
|
||
|
*******************************************************************************/
|
||
|
LOCAL void ICACHE_FLASH_ATTR
|
||
|
uart_config(uint8 uart_no)
|
||
|
{
|
||
|
uart_wait_tx_empty(uart_no);
|
||
|
|
||
|
if (uart_no == UART1) {
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
|
||
|
} else {
|
||
|
/* rcv_buff size if 0x100 */
|
||
|
ETS_UART_INTR_ATTACH(uart0_rx_intr_handler, &(UartDev.rcv_buff));
|
||
|
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
|
||
|
PIN_PULLUP_EN(PERIPHS_IO_MUX_U0RXD_U);
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD);
|
||
|
}
|
||
|
|
||
|
uart_div_modify(uart_no, UART_CLK_FREQ / (UartDev.baut_rate));
|
||
|
|
||
|
WRITE_PERI_REG(UART_CONF0(uart_no), ((UartDev.exist_parity & UART_PARITY_EN_M) << UART_PARITY_EN_S) //SET BIT AND PARITY MODE
|
||
|
| ((UartDev.parity & UART_PARITY_M) <<UART_PARITY_S )
|
||
|
| ((UartDev.stop_bits & UART_STOP_BIT_NUM) << UART_STOP_BIT_NUM_S)
|
||
|
| ((UartDev.data_bits & UART_BIT_NUM) << UART_BIT_NUM_S));
|
||
|
|
||
|
|
||
|
//clear rx and tx fifo,not ready
|
||
|
SET_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
||
|
CLEAR_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
||
|
|
||
|
//set rx fifo trigger
|
||
|
WRITE_PERI_REG(UART_CONF1(uart_no), (UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S);
|
||
|
|
||
|
//clear all interrupt
|
||
|
WRITE_PERI_REG(UART_INT_CLR(uart_no), 0xffff);
|
||
|
//enable rx_interrupt
|
||
|
SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA);
|
||
|
}
|
||
|
|
||
|
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart0_alt
|
||
|
* Description : Internal used function
|
||
|
* UART0 pins changed to 13,15 if 'on' is set, else set to normal pins
|
||
|
* Parameters : on - 1 = use alternate pins, 0 = use normal pins
|
||
|
* Returns : NONE
|
||
|
*******************************************************************************/
|
||
|
void ICACHE_FLASH_ATTR
|
||
|
uart0_alt(uint8 on)
|
||
|
{
|
||
|
uart_wait_tx_empty(UART0);
|
||
|
|
||
|
if (on)
|
||
|
{
|
||
|
PIN_PULLUP_DIS(PERIPHS_IO_MUX_MTDO_U);
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
|
||
|
PIN_PULLUP_EN(PERIPHS_IO_MUX_MTCK_U);
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, FUNC_U0CTS);
|
||
|
// now make RTS/CTS behave as TX/RX
|
||
|
IOSWAP |= (1 << IOSWAPU0);
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
|
||
|
PIN_PULLUP_EN(PERIPHS_IO_MUX_U0RXD_U);
|
||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD);
|
||
|
// now make RX/TX behave as TX/RX
|
||
|
IOSWAP &= ~(1 << IOSWAPU0);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart_tx_one_char
|
||
|
* Description : Internal used function
|
||
|
* Use uart interface to transfer one char
|
||
|
* Parameters : uint8 TxChar - character to tx
|
||
|
* Returns : OK
|
||
|
*******************************************************************************/
|
||
|
STATUS ICACHE_FLASH_ATTR
|
||
|
uart_tx_one_char(uint8 uart, uint8 TxChar)
|
||
|
{
|
||
|
if (uart == 0 && alt_uart0_tx) {
|
||
|
(*alt_uart0_tx)(TxChar);
|
||
|
return OK;
|
||
|
}
|
||
|
|
||
|
while (true)
|
||
|
{
|
||
|
uint32 fifo_cnt = READ_PERI_REG(UART_STATUS(uart)) & (UART_TXFIFO_CNT<<UART_TXFIFO_CNT_S);
|
||
|
if ((fifo_cnt >> UART_TXFIFO_CNT_S & UART_TXFIFO_CNT) < 126) {
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
WRITE_PERI_REG(UART_FIFO(uart) , TxChar);
|
||
|
return OK;
|
||
|
}
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart0_tx_buffer
|
||
|
* Description : use uart0 to transfer buffer
|
||
|
* Parameters : uint8 *buf - point to send buffer
|
||
|
* uint16 len - buffer len
|
||
|
* Returns :
|
||
|
*******************************************************************************/
|
||
|
void ICACHE_FLASH_ATTR
|
||
|
uart0_tx_buffer(uint8 *buf, uint16 len)
|
||
|
{
|
||
|
uint16 i;
|
||
|
|
||
|
for (i = 0; i < len; i++)
|
||
|
{
|
||
|
uart_tx_one_char(UART0, buf[i]);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart0_sendStr
|
||
|
* Description : use uart0 to transfer buffer
|
||
|
* Parameters : uint8 *buf - point to send buffer
|
||
|
* Returns :
|
||
|
*******************************************************************************/
|
||
|
void ICACHE_FLASH_ATTR uart0_sendStr(const char *str) {
|
||
|
while(*str)
|
||
|
uart0_putc(*str++);
|
||
|
}
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart0_sendStr
|
||
|
* Description : use uart0 to transfer buffer
|
||
|
* Parameters : uint8 *buf - point to send buffer
|
||
|
* size_t len - buffer len
|
||
|
* Returns :
|
||
|
*******************************************************************************/
|
||
|
void ICACHE_FLASH_ATTR uart0_sendStrn(const char *str, size_t len) {
|
||
|
size_t i;
|
||
|
for(i = 0; i < len; i++)
|
||
|
uart0_putc(*str++);
|
||
|
}
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart0_putc
|
||
|
* Description : use uart0 to transfer char
|
||
|
* Parameters : uint8 c - send char
|
||
|
* Returns :
|
||
|
*******************************************************************************/
|
||
|
void ICACHE_FLASH_ATTR uart0_putc(const char c)
|
||
|
{
|
||
|
if (c == '\n')
|
||
|
{
|
||
|
uart_tx_one_char(UART0, '\r');
|
||
|
uart_tx_one_char(UART0, '\n');
|
||
|
}
|
||
|
else if (c == '\r')
|
||
|
{
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
uart_tx_one_char(UART0, c);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart0_rx_intr_handler
|
||
|
* Description : Internal used function
|
||
|
* UART0 interrupt handler, add self handle code inside
|
||
|
* Parameters : void *para - point to ETS_UART_INTR_ATTACH's arg
|
||
|
* Returns : NONE
|
||
|
*******************************************************************************/
|
||
|
LOCAL void
|
||
|
uart0_rx_intr_handler(void *para)
|
||
|
{
|
||
|
/* uart0 and uart1 intr combine togther, when interrupt occur, see reg 0x3ff20020, bit2, bit0 represents
|
||
|
* uart1 and uart0 respectively
|
||
|
*/
|
||
|
RcvMsgBuff *pRxBuff = (RcvMsgBuff *)para;
|
||
|
uint8 RcvChar;
|
||
|
bool got_input = false;
|
||
|
|
||
|
if (UART_RXFIFO_FULL_INT_ST != (READ_PERI_REG(UART_INT_ST(UART0)) & UART_RXFIFO_FULL_INT_ST)) {
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
WRITE_PERI_REG(UART_INT_CLR(UART0), UART_RXFIFO_FULL_INT_CLR);
|
||
|
|
||
|
while (READ_PERI_REG(UART_STATUS(UART0)) & (UART_RXFIFO_CNT << UART_RXFIFO_CNT_S)) {
|
||
|
RcvChar = READ_PERI_REG(UART_FIFO(UART0)) & 0xFF;
|
||
|
|
||
|
/* you can add your handle code below.*/
|
||
|
|
||
|
*(pRxBuff->pWritePos) = RcvChar;
|
||
|
|
||
|
// insert here for get one command line from uart
|
||
|
if (RcvChar == '\r' || RcvChar == '\n' ) {
|
||
|
pRxBuff->BuffState = WRITE_OVER;
|
||
|
}
|
||
|
|
||
|
if (pRxBuff->pWritePos == (pRxBuff->pRcvMsgBuff + RX_BUFF_SIZE)) {
|
||
|
// overflow ...we may need more error handle here.
|
||
|
pRxBuff->pWritePos = pRxBuff->pRcvMsgBuff ;
|
||
|
} else {
|
||
|
pRxBuff->pWritePos++;
|
||
|
}
|
||
|
|
||
|
if (pRxBuff->pWritePos == pRxBuff->pReadPos){ // overflow one byte, need push pReadPos one byte ahead
|
||
|
if (pRxBuff->pReadPos == (pRxBuff->pRcvMsgBuff + RX_BUFF_SIZE)) {
|
||
|
pRxBuff->pReadPos = pRxBuff->pRcvMsgBuff ;
|
||
|
} else {
|
||
|
pRxBuff->pReadPos++;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
got_input = true;
|
||
|
}
|
||
|
|
||
|
if (got_input && sig) {
|
||
|
// Only post a new handler request once the handler has fired clearing the last post
|
||
|
if (isr_flag == *sig_flag) {
|
||
|
isr_flag ^= 0x01;
|
||
|
platform_post_high(sig, isr_flag);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
#ifdef BIT_RATE_AUTOBAUD
|
||
|
static void
|
||
|
uart_autobaud_timeout(void *timer_arg)
|
||
|
{
|
||
|
uint32_t uart_no = (uint32_t) timer_arg;
|
||
|
uint32_t divisor = uart_baudrate_detect(uart_no, 1);
|
||
|
static int called_count = 0;
|
||
|
|
||
|
// Shut off after two minutes to stop wasting CPU cycles if insufficient input received
|
||
|
if (called_count++ > 10 * 60 * 2 || divisor) {
|
||
|
os_timer_disarm(&autobaud_timer);
|
||
|
}
|
||
|
|
||
|
if (divisor) {
|
||
|
uart_div_modify(uart_no, divisor);
|
||
|
}
|
||
|
}
|
||
|
#include "pm/swtimer.h"
|
||
|
static void
|
||
|
uart_init_autobaud(uint32_t uart_no)
|
||
|
{
|
||
|
os_timer_setfn(&autobaud_timer, uart_autobaud_timeout, (void *) uart_no);
|
||
|
SWTIMER_REG_CB(uart_autobaud_timeout, SWTIMER_DROP);
|
||
|
//if autobaud hasn't done it's thing by the time light sleep triggered, it probably isn't going to happen.
|
||
|
os_timer_arm(&autobaud_timer, 100, TRUE);
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
uart_stop_autobaud()
|
||
|
{
|
||
|
os_timer_disarm(&autobaud_timer);
|
||
|
}
|
||
|
#endif
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart_init
|
||
|
* Description : user interface for init uart
|
||
|
* Parameters : UartBautRate uart0_br - uart0 bautrate
|
||
|
* UartBautRate uart1_br - uart1 bautrate
|
||
|
* Returns : NONE
|
||
|
*******************************************************************************/
|
||
|
void ICACHE_FLASH_ATTR
|
||
|
uart_init(UartBautRate uart0_br, UartBautRate uart1_br)
|
||
|
{
|
||
|
// rom use 74880 baut_rate, here reinitialize
|
||
|
UartDev.baut_rate = uart0_br;
|
||
|
uart_config(UART0);
|
||
|
UartDev.baut_rate = uart1_br;
|
||
|
uart_config(UART1);
|
||
|
#ifdef BIT_RATE_AUTOBAUD
|
||
|
uart_init_autobaud(0);
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
void ICACHE_FLASH_ATTR
|
||
|
uart_setup(uint8 uart_no)
|
||
|
{
|
||
|
#ifdef BIT_RATE_AUTOBAUD
|
||
|
uart_stop_autobaud();
|
||
|
#endif
|
||
|
// poll Tx FIFO empty outside before disabling interrupts
|
||
|
uart_wait_tx_empty(uart_no);
|
||
|
ETS_UART_INTR_DISABLE();
|
||
|
uart_config(uart_no);
|
||
|
ETS_UART_INTR_ENABLE();
|
||
|
}
|
||
|
|
||
|
/******************************************************************************
|
||
|
* FunctionName : uart_init_task
|
||
|
* Description : user interface for init uart task callback
|
||
|
* Parameters : os_signal_t sig_input - signal to post
|
||
|
* uint8 *flag_input - flag of consumer task
|
||
|
* Returns : NONE
|
||
|
*******************************************************************************/
|
||
|
|
||
|
void ICACHE_FLASH_ATTR uart_init_task(os_signal_t sig_input, uint8 *flag_input) {
|
||
|
sig = sig_input;
|
||
|
sig_flag = flag_input;
|
||
|
}
|
||
|
|
||
|
void ICACHE_FLASH_ATTR uart_set_alt_output_uart0(void (*fn)(char)) {
|
||
|
alt_uart0_tx = fn;
|
||
|
}
|
||
|
|
||
|
UartConfig ICACHE_FLASH_ATTR uart_get_config(uint8 uart_no) {
|
||
|
UartConfig config;
|
||
|
|
||
|
config.baut_rate = UART_CLK_FREQ / READ_PERI_REG(UART_CLKDIV(uart_no));
|
||
|
|
||
|
uint32_t conf = READ_PERI_REG(UART_CONF0(uart_no));
|
||
|
|
||
|
config.exist_parity = (conf >> UART_PARITY_EN_S) & UART_PARITY_EN_M;
|
||
|
config.parity = (conf >> UART_PARITY_S) & UART_PARITY_M;
|
||
|
config.stop_bits = (conf >> UART_STOP_BIT_NUM_S) & UART_STOP_BIT_NUM;
|
||
|
config.data_bits = (conf >> UART_BIT_NUM_S) & UART_BIT_NUM;
|
||
|
|
||
|
return config;
|
||
|
}
|