gardenia/ipl/di.c
2018-05-01 17:22:03 +12:00

214 lines
5.4 KiB
C
Executable File

/*
* Copyright (c) 2018 naehrwert
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "di.h"
#include "t210.h"
#include "util.h"
#include "i2c.h"
#include "pmc.h"
#include "max77620.h"
#include "di.inl"
static u32 _display_ver = 0;
static void _display_dsi_wait(u32 timeout, u32 off, u32 mask)
{
u32 end = TMR(0x10) + timeout;
while (TMR(0x10) < end && DSI(off) & mask)
;
sleep(5);
}
void display_init()
{
//Power on.
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_LDO0_CFG, 0xD0); //Configure to 1.2V.
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_GPIO7, 0x09);
//Enable MIPI CAL, DSI, DISP1, HOST1X, UART_FST_MIPI_CAL, DSIA LP clocks.
CLOCK(0x30C) = 0x1010000;
CLOCK(0x328) = 0x1010000;
CLOCK(0x304) = 0x18000000;
CLOCK(0x320) = 0x18000000;
CLOCK(0x284) = 0x20000;
CLOCK(0x66C) = 0xA;
CLOCK(0x448) = 0x80000;
CLOCK(0x620) = 0xA;
//DPD idle.
PMC(APBDEV_PMC_IO_DPD_REQ) = 0x40000000;
PMC(APBDEV_PMC_IO_DPD2_REQ) = 0x40000000;
//Config pins.
PINMUX_AUX(0x1D0) &= 0xFFFFFFEF;
PINMUX_AUX(0x1D4) &= 0xFFFFFFEF;
PINMUX_AUX(0x1FC) &= 0xFFFFFFEF;
PINMUX_AUX(0x200) &= 0xFFFFFFEF;
PINMUX_AUX(0x204) &= 0xFFFFFFEF;
GPIO_3(0x00) = GPIO_3(0x00) & 0xFFFFFFFC | 0x3;
GPIO_3(0x10) = GPIO_3(0x10) & 0xFFFFFFFC | 0x3;
GPIO_3(0x20) = GPIO_3(0x20) & 0xFFFFFFFE | 0x1;
sleep(10000u);
GPIO_3(0x20) = GPIO_3(0x20) & 0xFFFFFFFD | 0x2;
sleep(10000);
GPIO_6(0x04) = GPIO_6(0x04) & 0xFFFFFFF8 | 0x7;
GPIO_6(0x14) = GPIO_6(0x14) & 0xFFFFFFF8 | 0x7;
GPIO_6(0x24) = GPIO_6(0x24) & 0xFFFFFFFD | 0x2;
//Config display interface and display.
MIPI_CAL(0x60) = 0;
exec_cfg((u32 *)CLOCK_BASE, _display_config_1, 4);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_2, 94);
exec_cfg((u32 *)DSI_BASE, _display_config_3, 60);
sleep(10000);
GPIO_6(0x24) = GPIO_6(0x24) & 0xFFFFFFFB | 0x4;
sleep(60000);
DSI(_DSIREG(DSI_DSI_BTA_TIMING)) = 0x50204;
DSI(_DSIREG(DSI_DSI_WR_DATA)) = 0x337;
DSI(_DSIREG(DSI_DSI_TRIGGER)) = 0x2;
_display_dsi_wait(250000, _DSIREG(DSI_DSI_TRIGGER), 3);
DSI(_DSIREG(DSI_DSI_WR_DATA)) = 0x406;
DSI(_DSIREG(DSI_DSI_TRIGGER)) = 0x2;
_display_dsi_wait(250000, _DSIREG(DSI_DSI_TRIGGER), 3);
DSI(_DSIREG(DSI_HOST_DSI_CONTROL)) = 0x200B;
_display_dsi_wait(150000, _DSIREG(DSI_HOST_DSI_CONTROL), 8);
sleep(5000);
_display_ver = DSI(_DSIREG(DSI_DSI_RD_DATA));
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_4, 43);
DSI(_DSIREG(DSI_DSI_WR_DATA)) = 0x1105;
DSI(_DSIREG(DSI_DSI_TRIGGER)) = 0x2;
sleep(180000);
DSI(_DSIREG(DSI_DSI_WR_DATA)) = 0x2905;
DSI(_DSIREG(DSI_DSI_TRIGGER)) = 0x2;
sleep(20000);
exec_cfg((u32 *)DSI_BASE, _display_config_5, 21);
exec_cfg((u32 *)CLOCK_BASE, _display_config_6, 3);
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = 4;
exec_cfg((u32 *)DSI_BASE, _display_config_7, 10);
sleep(10000);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_8, 6);
exec_cfg((u32 *)DSI_BASE, _display_config_9, 4);
exec_cfg((u32 *)MIPI_CAL_BASE, _display_config_10, 16);
sleep(10000);
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_11, 113);
}
void display_end()
{
GPIO_6(0x24) &= 0xFFFFFFFE;
DSI(_DSIREG(DSI_DSI_VID_MODE_CONTROL)) = 1;
DSI(_DSIREG(DSI_DSI_WR_DATA)) = 0x2805;
u32 end = HOST1X(0x30A4) + 5;
while (HOST1X(0x30A4) < end)
;
DISPLAY_A(_DIREG(DC_CMD_STATE_ACCESS)) = 5;
DSI(_DSIREG(DSI_DSI_VID_MODE_CONTROL)) = 0;
exec_cfg((u32 *)DISPLAY_A_BASE, _display_config_12, 17);
exec_cfg((u32 *)DSI_BASE, _display_config_13, 16);
sleep(10000);
if (_display_ver == 0x10)
exec_cfg((u32 *)DSI_BASE, _display_config_14, 22);
DSI(_DSIREG(DSI_DSI_WR_DATA)) = 0x1005;
DSI(_DSIREG(DSI_DSI_TRIGGER)) = 2;
sleep(50000);
GPIO_6(0x24) &= 0xFFFFFFFB;
sleep(10000);
GPIO_3(0x20) &= 0xFFFFFFFD;
sleep(10000);
GPIO_3(0x20) = (GPIO_3(0x20) >> 1) << 1;
sleep(10000);
//Disable clocks.
CLOCK(0x308) = 0x1010000;
CLOCK(0x32C) = 0x1010000;
CLOCK(0x300) = 0x18000000;
CLOCK(0x324) = 0x18000000;
DSI(_DSIREG(DSI_PAD_CONTROL)) = 0x10F010F;
DSI(_DSIREG(DSI_DSI_POWER_CONTROL)) = 0;
GPIO_6(0x04) &= 0xFFFFFFFE;
PINMUX_AUX(0x1FC) = PINMUX_AUX(0x1FC) & 0xFFFFFFEF | 0x10;
PINMUX_AUX(0x1FC) = (PINMUX_AUX(0x1FC) >> 2) << 2 | 1;
}
void display_color_screen(u32 color)
{
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_one_color, 8);
//Configure display to show single color.
DISPLAY_A(_DIREG(DC_WIN_AD_WIN_OPTIONS)) = 0;
DISPLAY_A(_DIREG(DC_WIN_BD_WIN_OPTIONS)) = 0;
DISPLAY_A(_DIREG(DC_WIN_CD_WIN_OPTIONS)) = 0;
DISPLAY_A(_DIREG(DC_DISP_BLEND_BACKGROUND_COLOR)) = color;
DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) = DISPLAY_A(_DIREG(DC_CMD_STATE_CONTROL)) & 0xFFFFFFFE | 1;
sleep(35000);
GPIO_6(0x24) = GPIO_6(0x24) & 0xFFFFFFFE | 1;
}
u32 *display_init_framebuffer(u32 *fb)
{
//This configures the framebuffer @ 0xC0000000 with a resolution of 1280x720 (line stride 768).
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer, 32);
sleep(35000);
GPIO_6(0x24) = GPIO_6(0x24) & 0xFFFFFFFE | 1;
return (u32 *)0xC0000000;
}