gardenia/loader/clock.h

217 lines
6.1 KiB
C
Raw Normal View History

2024-01-14 08:20:28 +00:00
/*
* Copyright (c) 2024 hydrogenium2020-offical
* Copyright (c) 2018 naehrwert
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "types.h"
/*! Generic clock descriptor. */
typedef struct _clk_rst_t
{
u16 reset;
u16 enable;
u16 source;
u8 index;
u8 clk_src;
u8 clk_div;
} clk_rst_t;
/* soc-specific */
#define TEGRA_CLK_M_KHZ 12000
#define TEGRA_PLLX_KHZ 2000000
#define TEGRA_PLLP_KHZ (408000)
#define TEGRA_PLLC_KHZ (600000)
#define TEGRA_PLLD_KHZ (925000)
#define TEGRA_PLLU_KHZ (960000)
#define TEGRA_SCLK_KHZ (300000)
#define TEGRA_HCLK_RATIO 1
#define TEGRA_HCLK_KHZ (TEGRA_SCLK_KHZ / (1 + TEGRA_HCLK_RATIO))
#define TEGRA_PCLK_RATIO 0
#define TEGRA_PCLK_KHZ (TEGRA_HCLK_KHZ / (1 + TEGRA_PCLK_RATIO))
#define CLK_RST_CONTROLLER_OSC_CTRL 0x50
#define CLK_OSC_DRIVE_STRENGTH 7
//PLLC
#define CLK_RST_CONTROLLER_PLLC_BASE 0x80
#define CLK_RST_CONTROLLER_PLLC_MISC 0x8c
#define CLK_RST_CONTROLLER_PLLC_MISC_PLLC_LOCK_ENABLE_SHIFT 24
#define CLK_RST_CONTROLLER_PLLC_MISC2 0x88
#define CLK_RST_CONTROLLER_PLLC_BASE_PLLC_BYPASS_SHIFT 31
#define CLK_RST_CONTROLLER_PLLC_OUT 0x84
#define CLK_RST_CONTROLLER_CLK_SYSTEM_RATE 0x30
#define CLK_RST_CONTROLLER_CLK_SYSTEM_RATE_AHB_RATE_SHIFT 4
#define CLK_RST_CONTROLLER_CLK_SYSTEM_RATE_APB_RATE_SHIFT 0
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY 0x28
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SYS_STATE_SHIFT 28
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SYS_STATE_IDLE 1
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SYS_STATE_RUN 2
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SWAKEUP_RUN_SOURCE_PLLC_OUT1 1
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SWAKEUP_RUN_SOURCE_PLLP_OUT4 2
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SWAKEUP_RUN_SOURCE_PLLP_OUT3 3
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SWAKEUP_RUN_SOURCE_PLLP_OUT2 4
#define CLK_RST_CONTROLLER_SCLK_BURST_POLICY_SWAKEUP_RUN_SOURCE_SHIFT 4
//PLLP
#define CLK_RST_CONTROLLER_PLLP_OUTA 0xA4
#define CLK_RST_CONTROLLER_PLLP_OUTB 0xA8
#define CLK_RST_CONTROLLER_PLLM_OUT_PLLM_OUT1_RATIO_SHIFT 8
#define CLK_RST_CONTROLLER_PLLP_OUTA_PLLP_OUT1_OVRRIDE_SHIFT 2
#define CLK_RST_CONTROLLER_PLLM_OUT_PLLM_OUT1_CLKEN_SHIFT 1
#define CLK_RST_CONTROLLER_PLLM_OUT_PLLM_OUT1_RSTN_SHIFT 0
//PLLX
#define PLLX_MISC3_IDDQ (1U << 3)
#define CLK_RST_CONTROLLER_PLLX_BASE 0xe0
#define CLK_RST_CONTROLLER_PLLX_MISC 0xe4
#define CLK_RST_CONTROLLER_PLLX_MISC_3 0x518
#define CLK_RST_CONTROLLER_PLLX_MISC_PLLX_LOCK_ENABLE_SHIFT 18
//PLLU
#define CLK_RST_CONTROLLER_PLLU_BASE 0xc0
#define CLK_RST_CONTROLLER_PLLU_MISC 0xcc
#define CLK_RST_CONTROLLER_PLLU_MISC_PLLU_LOCK_ENABLE_SHIFT 22
//PLLDP (Graphis PLL)
#define CLK_RST_CONTROLLER_PLLDP_SS_CFG 0x598
#define CLK_RST_CONTROLLER_PLLDP_BASE 0x590
#define CLK_RST_CONTROLLER_PLLDP_MISC 0x594
#define CLK_RST_CONTROLLER_PLLDP_MISC_0_PLLDP_LOCK_ENABLE_SHIFT 30
#define PLL_OUT1_SHIFT 0
#define PLL_OUT2_SHIFT 16
#define PLL_OUT3_SHIFT 0
#define PLL_OUT4_SHIFT 16
#define PLL_BASE_DIVN_SHIFT 8
#define PLL_BASE_DIVM_SHIFT 0
#define PLL_BASE_DIVP_SHIFT 20
#define PLL_MISC_CPCON_SHIFT 8
#define PLL_MISC_LFCON_SHIFT 4
#define CLK_RST_CONTROLLER_PLLC_BASE_PLLC_ENABLE_SHIFT 30
#define CLK_RST_CONTROLLER_PLLC_BASE_PLLC_LOCK_SHIFT 27
#define PLLCX_BASE_LOCK BIT(27)
#define DIV_ROUND_UP(x, y) ({ \
__typeof__(x) _div_local_x = (x); \
__typeof__(y) _div_local_y = (y); \
(_div_local_x + _div_local_y - 1) / _div_local_y; \
})
#define CLK_DIVIDER(REF, FREQ) (DIV_ROUND_UP(((REF) * 2), (FREQ)) - 2)
//MC
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC 0x19c
#define CLK_RST_CONTROLLER_CLK_ENB_H_SET 0x328
#define CLK_RST_CONTROLLER_CLK_ENB_X_SET 0x284
#define CLK_RST_CONTROLLER_RST_DEV_H_SET 0x308
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD 0x3a4
//Reset
#define CLK_RST_CONTROLLER_RST_DEVICES_L 0x4
#define CLK_RST_CONTROLLER_RST_DEVICES_H 0x8
#define CLK_RST_CONTROLLER_RST_DEVICES_U 0xC
#define CLK_RST_CONTROLLER_CLK_OUT_ENB_L 0x10
#define CLK_RST_CONTROLLER_CLK_OUT_ENB_H 0x14
#define CLK_RST_CONTROLLER_CLK_OUT_ENB_U 0x18
//UART
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTA 0x178
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTB 0x17C
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTC 0x1A0
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTD 0x1C0
enum CLK_L_DEV
{
CLK_L_UARTA = 6,
CLK_L_UARTB = 7,
};
enum CLK_H_DEV
{
CLK_H_UARTC = 23,
};
enum CLK_U_DEV
{
CLK_U_UARTD = 1,
};
enum {
CLK_OSC_XOE = 0x1 << 0,
CLK_OSC_XOFS_SHIFT = 4,
CLK_OSC_XOFS_MASK = 0x3f << CLK_OSC_XOFS_SHIFT,
CLK_OSC_FREQ_SHIFT = 28,
CLK_OSC_FREQ_MASK = 0xf << CLK_OSC_FREQ_SHIFT
};
struct pll_dividers {
u32 n : 10;
u32 m : 8;
u32 p : 4;
u32 cpcon : 4;
u32 lfcon : 4;
u32 : 2;
};
/* Some PLLs have more restrictive divider bit lengths or are missing some
* fields. Make sure to use the right struct in the osc_table definition to get
* compile-time checking, but keep the bits aligned with struct pll_dividers so
* they can be used interchangeably at run time. Add new formats as required. */
struct pllcx_dividers {
u32 n : 8;
u32 : 2;
u32 m : 8;
u32 p : 4;
u32 : 10;
};
struct pllpad_dividers {
u32 n : 10;
u32 m : 5;
u32 : 3;
u32 p : 3;
u32 : 1;
u32 cpcon : 4;
u32 : 6;
};
struct pllu_dividers {
u32 n : 10;
u32 m : 5;
u32 : 3;
u32 p : 1;
u32 : 3;
u32 cpcon : 4;
u32 lfcon : 4;
u32 : 2;
};
union __attribute__((transparent_union)) pll_fields {
u32 raw;
struct pll_dividers div;
struct pllcx_dividers cx;
struct pllpad_dividers pad;
struct pllu_dividers u;
};
2024-01-14 08:20:28 +00:00
void clock_enable(const clk_rst_t *clk);
void clock_disable(const clk_rst_t *clk);
void clock_enable_cl_dvfs();
void clock_enable_i2c(u32 idx);
void clock_enable_uart(u32 idx);
void config_oscillators();
int clock_uart_use_src_div(u32 idx, u32 baud);