Samsung_S7/documentation/source/BootROM_8890/index.rst

205 lines
9.5 KiB
ReStructuredText

===================
Exynos BootROM 8890
===================
The Exynos 8890 BootROM is a small piece of code that runs on the Exynos SoC at boot time.
It is responsible for initializing the hardware and loading the first stage bootloader from storage.
The BootROM is stored in a read-only memory and cannot be modified.
Protections
-----------
There are no stack canaries or guard pages, and no ASLR. Meaning there are almost no protections in place.
Rom is at address 0x0 and is unwritable(Sometimes this is writeable due to MMU caching).
Samsung Firmware
----------------
Samsung releases firmware files for their devices. These files contain the bootloader, modem, and other firmware files.
To see how the ROM works we are interested in the sboot firmware, which contains multiple stages of the bootloader.
To extract the sboot.bin file from a samsung firmware file:
.. code-block:: bash
$ unzip -p firmware.zip 'BL_*.tar.md5' | tar -Oxf - 'sboot.bin.lz4' | lz4 -d - sboot.bin
Frederic has also written a payload to extract the sboot.bin file from a connected samsung device (See: :ref:`boot-chain-label`). The extracted boots can be split up in different stages. We're provied with sboot 1-4.bin. Running strings then provides us with some information about each stage.
.. code-block:: bash
$ strings -n4 sboot.bin.1.bin
Memory Layout
-------------
TODO make memory layout of ROM, IMEM and some devices @JONHE
.. figure:: images/memory_layout.drawio.svg
The memory layout of the Exynos 8890
Download protocol
-----------------
When the ROM is unable to boot from the internal storage, it enters ``Exynos Recovery Mode``.
In this mode the bootROM accepts data over USB.
There is little functionality other than receiving data, meaning almost no additional attack surface except for the download protocol.
The Exynos BootROM uses a custom protocol to download a bootable image over USB. This image is verified and executed by the BootROM. Unauthorized images are rejected. Initial authorisation is done using the '_auth_bl1' function.
(TODO verify and document)
dldata
^^^^^^
For uploading a stage to boot, a custom protocol is used. The dldata that has to be send is the following:
.. figure:: images/dl_packet.drawio.svg
The dldata packet is used to send data to the BootROM.
The size in the packet is the total size of the packet, including header and footer.
.. info::
This protocol remains *mostly* the same for newer Exynos SoCs.
USB Stack
---------
This information is largely based on the blogpost of Frederic on reversing the `USB stack of the Exynos BootROM <https://fredericb.info/2020/06/reverse-engineer-usb-stack-of-exynos-bootrom.html#reverse-engineer-usb-stack-of-exynos-bootrom>`_. We're looking at the proprietary USB protocol used by the Exynos BootROM.
The base address of the usb controller (dwusb3) is mapped at 0x1540000, with a size of 0x10000: (can be found at: `Exynos8890 dtsi <https://github.com/LineageOS/android_kernel_samsung_universal8890/tree/lineage-18.1/arch/arm64/boot/dts>`_).
.. code-block:: dts
udc: usb@15400000 {
compatible = "samsung,exynos8890-dwusb3";
clocks = <&clock 700>, <&clock 703>, <&clock 708>, <&clock 709>;
clock-names = "aclk", "sclk", "phyclock", "pipe_pclk";
reg = <0x0 0x15400000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
ranges;
usb-pm-qos-int = <255000>;
status = "disabled";
usbdrd_dwc3: dwc3 {
compatible = "synopsys,dwc3";
reg = <0x0 0x15400000 0x10000>;
interrupts = <0 213 0>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
};
};c
This is a basic USB controller, but some functions, that are also present in the linux kernel, should be visible in the bootROM as well. Available functions could be: `linux-kernel-dwc3 <https://android.googlesource.com/kernel/msm/+/android-msm-dory-3.10-kitkat-wear/drivers/usb/dwc3/core.h>`_.
The USB host sends a USB_REQ_SET_ADDRESS, `'0x05' <https://asf.microchip.com/docs/latest/common.services.usb.class.composite.device.example.hidms_msc.saml21_xplained_pro/html/group__usb__protocol__group.html>`_, which the connected device has to acknowledge, and will then start sending data to this address. Initially, the device will send data to '0x00'.
.. code:: c
usb_reqid {
USB_REQ_GET_STATUS = 0,
USB_REQ_CLEAR_FEATURE = 1,
USB_REQ_SET_FEATURE = 3,
USB_REQ_SET_ADDRESS = 5,
USB_REQ_GET_DESCRIPTOR = 6,
USB_REQ_SET_DESCRIPTOR = 7,
USB_REQ_GET_CONFIGURATION = 8,
USB_REQ_SET_CONFIGURATION = 9,
USB_REQ_GET_INTERFACE = 10,
USB_REQ_SET_INTERFACE = 11,
USB_REQ_SYNCH_FRAME = 12
}
Ghidra shows `DWC3_DCFG & 0xfffffc00 | DWC3_DCFG & 7 | (param_1 & 0x7f) << 3;`, essentially preserves bits 0-2 and 10-31, and sets bits 3-9 to the value of param_1, which is then likely the address of the device.
.. figure:: images/ghidra_dwc3_dcfg_devaddr.png
bootrom exynos 8890 dwc3_dcfg_devaddr
Other general device descriptors are also sent from the device to the host (to describe the device), these are visible in/at 'usb_init_device_descriptor' (6098) and usb_init_descriptors (610c). Two end point addresses are visible: bEndpointAddress 0x81 and 0x02. 0x81 is 10000001 in binary, with bit 7 being '1', which means that the bulk transfer direction is IN. 0x02 is 00000010 in binary, with bit '7' being '0', which means that the bulk transfer direction is OUT.
Data is transferred via Transfer Request Blocks (TRB), dwc3_depcmd_starttransfer is used. The TRB then contains a buffer address, where transferred data from the host is written to. The buffer allocation is done by 'usb_setup_event_buffer', which sets bufferHigh (DWC3_GEVNTADRLO), bufferLow (DWC3_GEVNTADRHI) and bufferSize (DWC3_GEVNTSIZ).
Bug 1 (Integer overflow)
^^^^^^^^^^^^^^^^^^^^^^^^
Originally described in this `blogpost <https://fredericb.info/2020/06/exynos-usbdl-unsigned-code-loader-for-exynos-bootrom.html#exynos-usbdl-unsigned-code-loader-for-exynos-bootrom>`_.
The exynos bootrom uses a simple USB protocol to receive a bootloader binary from a USB host. The binary sent is called 'dldata'. In Ghidra, at 21518, we can see that it consists of unit32_t: ready?, uint32: size, ? : data, uint16: footer. The contents of this data are checked before being being written.
.. figure:: images/usb_setup_ready_to_0.png
The ready flag is set to 0 in the Exynos 8890 BootROM in an earlier function on pdVar1->size (pdVar1.size)
.. figure:: images/dl_data_struct.png
The dldata struct in the Exynos 8890 BootROM
.. code:: c
if ((pdVar1->size < 0x206ffff) && (0x206ffff < pdVar1->size + remaining)) {
*(undefined *)&pdVar1->ready = 2;
}
In essence, the payload is not allowed to be larger than 0x206fff (34013183), it checks so with 2 seperate checks
1) In the first condition, the size has to be smaller than 0x206ffff (`pdVar1->size < 0x206ffff`) (34013183 in decimal),
2) and in the second condition, it checks whether 0x206ffff is indeed still less than the size of the payload + remaining (size + remaining)(`0x206ffff < pdVar1->size + remaining`).
If both conditions are met, the payload will NOT be loaded. But this makes sense, as both checks just ensure that the payload is not larger than 0x206ffff.
The bug is however, that the check that the check is done on a uint32_t (2^32 = 4294967296), but the max value that can be checked by a uint32 is 0xFDFDE7FF = 4294967295. So a value of 0xFDFDE7FF + 1 = 0xFDFDE800 = 4294967296, which is larger than the max value of a uint32. So if a payload of this size or more is used, which is much larger than the max requested value 0x206ffff, the check will pass and the payload will still be loaded.
.. figure:: images/usb_payload_size_check.jpeg
The size check in the Exynos 8890 BootROM
Sending such large amounts of data can cause a memory overflow, and will cause the target to crash. Not interesting for exploitation in this context. However, the USB packages that are sent, are split into smaller packages with a size of 0xFFFE00.
.. figure:: images/max_allowed_chunck_size.jpeg
The max allowed chunk size, after which the payload is split.
The dl_buf pointer is set to the amount it expects to write, instead to the amount that it has written. By transferring a large amount of data, without actually writing it (so in a package, send no data, but tell the target that you're sending data with a length larger than 0xFDFDE800), will cause the pointer to move, without actually writing data.
The trick then becomes, to get the pointer to an address we would like to exploit unto. Then we have a little less than 512 bytes (502 according to dldata) to write our payload.
.. code:: c
typedef struct dldata_s {
u_int32_t ready; //start = 02021518, end = 0202151C. Length = 4
u_int32_t size; //start = 0202151C, end = 02021520. Length = 4
u_int8_t data[n]; //start = 02021520, end = 02021714. Length = 502 == MAX TRANSFER SIZE
u_int16_t footer; //start = 02021714, end = 02021716. Length = 2
} dldata;
Bug 2
^^^^^
.. caution::
Might be a 0/N-day if exploitable
@ELHER
There is a bug(unpatched?) in receiving the last packet of the usb image:
.. figure:: images/underflow_bug.png
The bug is an integer underflow in the calculation of the remaining size of the image.
DWC3
^^^^
The Exynos 8890 uses the Synopsys DesignWare USB 3.0 controller.
Much of the code is shared with the DWC3 driver in the Linux kernel, except that the ROM does not do any scheduling and a lot of features have been removed(OTG handling, etc).
Gupje
^^^^^
In order to run the debugger, a small amount of the bootROM was reversed in order to implement send/recv functionality.