f478fba663
Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 650/400/200 MHz (CPU/DDR/AHB) - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - two external, non-detachable antennas - 8x LED, 1x button - UART header (pinout: VCC, RX, TX, GND) Flash instruction: Use sysupgrade in vendor firmare which is based on OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
154 lines
4.0 KiB
C
154 lines
4.0 KiB
C
/*
|
|
* Zbtlink ZBT-WE1526 board support
|
|
*
|
|
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* Based on mach-dr531.c and mach-tl-wr841n-v9.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define ZBT_WE1526_GPIO_LED_STATUS 13
|
|
#define ZBT_WE1526_GPIO_LED_LAN1 16
|
|
#define ZBT_WE1526_GPIO_LED_LAN2 15
|
|
#define ZBT_WE1526_GPIO_LED_LAN3 14
|
|
#define ZBT_WE1526_GPIO_LED_LAN4 11
|
|
#define ZBT_WE1526_GPIO_LED_WAN 4
|
|
#define ZBT_WE1526_GPIO_LED_WLAN 12
|
|
|
|
#define ZBT_WE1526_GPIO_BTN_RESET 17
|
|
|
|
#define ZBT_WE1526_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define ZBT_WE1526_KEYS_DEBOUNCE_INTERVAL \
|
|
(3 * ZBT_WE1526_KEYS_POLL_INTERVAL)
|
|
|
|
#define ZBT_WE1526_MAC0_OFFSET 0x0
|
|
#define ZBT_WE1526_MAC1_OFFSET 0x6
|
|
#define ZBT_WE1526_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led zbt_we1526_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "zbt-we1526:green:status",
|
|
.gpio = ZBT_WE1526_GPIO_LED_STATUS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "zbt-we1526:green:lan1",
|
|
.gpio = ZBT_WE1526_GPIO_LED_LAN1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "zbt-we1526:green:lan2",
|
|
.gpio = ZBT_WE1526_GPIO_LED_LAN2,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "zbt-we1526:green:lan3",
|
|
.gpio = ZBT_WE1526_GPIO_LED_LAN3,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "zbt-we1526:green:lan4",
|
|
.gpio = ZBT_WE1526_GPIO_LED_LAN4,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "zbt-we1526:green:wan",
|
|
.gpio = ZBT_WE1526_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "zbt-we1526:green:wlan",
|
|
.gpio = ZBT_WE1526_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button zbt_we1526_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = ZBT_WE1526_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ZBT_WE1526_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init zbt_we1526_gpio_setup(void)
|
|
{
|
|
/* For LED on GPIO4 */
|
|
ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
|
|
ath79_gpio_output_select(ZBT_WE1526_GPIO_LED_WAN, 0);
|
|
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_STATUS, true);
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN1, true);
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN2, true);
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN3, true);
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN4, true);
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_WAN, true);
|
|
ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_WLAN, true);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(zbt_we1526_leds_gpio),
|
|
zbt_we1526_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, ZBT_WE1526_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(zbt_we1526_gpio_keys),
|
|
zbt_we1526_gpio_keys);
|
|
}
|
|
|
|
static void __init zbt_we1526_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
zbt_we1526_gpio_setup();
|
|
|
|
ath79_setup_ar933x_phy4_switch(false, false);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
/* LAN */
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_switch_data.phy_poll_mask |= BIT(4);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr,
|
|
art + ZBT_WE1526_MAC0_OFFSET, 0);
|
|
ath79_register_eth(1);
|
|
|
|
/* WAN */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
art + ZBT_WE1526_MAC1_OFFSET, 0);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_wmac(art + ZBT_WE1526_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
ath79_register_usb();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ZBT_WE1526, "ZBT-WE1526", "Zbtlink ZBT-WE1526",
|
|
zbt_we1526_setup);
|