987b961537
This adds the build option for UniFi AC Mesh Pro as well as
model detection for it.
The device is a hardware clone of the AC Pro.
- SoC: QCA9563-AL3A (775Mhz)
- RAM: 128MiB
- Flash: 16MiB - dual firmware partitions!
- LAN: 2x 1000M - POE+
- Wireless:
2.4G: QCA9563
5G: UniFi Chip, QCA988X compatible
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
180 lines
4.6 KiB
C
180 lines
4.6 KiB
C
/*
|
|
* Ubiquiti UniFi AC (LITE) board support
|
|
*
|
|
* Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
|
|
*
|
|
* Derived from: mach-ubnt-xm.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/irq.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "dev-usb.h"
|
|
#include "machtypes.h"
|
|
|
|
|
|
#define UNIFIAC_KEYS_POLL_INTERVAL 20
|
|
#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
|
|
|
|
#define UNIFIAC_GPIO_LED_WHITE 7
|
|
#define UNIFIAC_GPIO_LED_BLUE 8
|
|
|
|
#define UNIFIAC_GPIO_BTN_RESET 2
|
|
|
|
#define UNIFIAC_MAC0_OFFSET 0x0000
|
|
#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000
|
|
#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000
|
|
|
|
|
|
static struct flash_platform_data ubnt_unifiac_flash_data = {
|
|
/* mx25l12805d and mx25l12835f have the same JEDEC ID */
|
|
.type = "mx25l12805d",
|
|
};
|
|
|
|
static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "ubnt:white:dome",
|
|
.gpio = UNIFIAC_GPIO_LED_WHITE,
|
|
.active_low = 0,
|
|
}, {
|
|
.name = "ubnt:blue:dome",
|
|
.gpio = UNIFIAC_GPIO_LED_BLUE,
|
|
.active_low = 0,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = UNIFIAC_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static void __init ubnt_unifiac_lite_setup(void)
|
|
{
|
|
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(&ubnt_unifiac_flash_data);
|
|
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
eeprom + UNIFIAC_MAC0_OFFSET, 0);
|
|
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_pll_data.pll_10 = 0x00001313;
|
|
|
|
ath79_register_mdio(0, ~BIT(4));
|
|
ath79_register_eth(0);
|
|
|
|
|
|
ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
|
|
ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
|
|
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
|
|
ubnt_unifiac_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ubnt_unifiac_gpio_keys),
|
|
ubnt_unifiac_gpio_keys);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE",
|
|
"Ubiquiti UniFi-AC-LITE/MESH", ubnt_unifiac_lite_setup);
|
|
|
|
static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
|
|
.pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
|
|
static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.mdio_addr = 0,
|
|
.platform_data = &ubnt_unifiac_pro_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init ubnt_unifiac_pro_setup(void)
|
|
{
|
|
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(&ubnt_unifiac_flash_data);
|
|
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr,
|
|
eeprom + UNIFIAC_MAC0_OFFSET, 0);
|
|
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
|
|
mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info,
|
|
ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info));
|
|
|
|
ath79_register_mdio(0, 0x00);
|
|
ath79_register_eth(0);
|
|
|
|
|
|
ath79_register_usb();
|
|
|
|
|
|
ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
|
|
ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
|
|
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
|
|
ubnt_unifiac_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ubnt_unifiac_gpio_keys),
|
|
ubnt_unifiac_gpio_keys);
|
|
}
|
|
|
|
|
|
MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO",
|
|
"Ubiquiti UniFi-AC-PRO/MESH-PRO", ubnt_unifiac_pro_setup);
|