a639cbfd00
You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin on 192.168.0.66/24, connect to any ethernet port and power on device while holding the reset button). Flashing via OEM web interface does not work. Hardware Specification (v1.0 EU): - SoC: QCA9531 - Flash: Winbond W25Q64FV (8MiB) - RAM: EtronTech EM6AB160TSE-5G (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 2NIC (3x100M + 1x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 12V 1A Signed-off-by: Filip Moc <lede@moc6.cz>
152 lines
4.0 KiB
C
152 lines
4.0 KiB
C
/*
|
|
* TP-LINK TL-MR6400 board support
|
|
*
|
|
* Copyright (C) 2017 Filip Moc <lede@moc6.cz>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define TL_MR6400_GPIO_LTE_POWER 4
|
|
#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */
|
|
#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */
|
|
#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */
|
|
#define TL_MR6400_GPIO_LED_4G 1 /* D11 */
|
|
#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */
|
|
#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */
|
|
#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */
|
|
#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */
|
|
|
|
#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL)
|
|
|
|
#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static const char *tl_mr6400_part_probes[] = {
|
|
"tp-link",
|
|
NULL,
|
|
};
|
|
|
|
static struct flash_platform_data tl_mr6400_flash_data = {
|
|
.part_probes = tl_mr6400_part_probes,
|
|
.type = "w25q64",
|
|
};
|
|
|
|
static struct gpio_led tl_mr6400_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tp-link:white:wan",
|
|
.gpio = TL_MR6400_GPIO_LED_WAN,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "tp-link:white:4g",
|
|
.gpio = TL_MR6400_GPIO_LED_4G,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "tp-link:white:wps",
|
|
.gpio = TL_MR6400_GPIO_LED_WPS,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "tp-link:white:wlan",
|
|
.gpio = TL_MR6400_GPIO_LED_WLAN,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "tp-link:white:power",
|
|
.gpio = TL_MR6400_GPIO_LED_POWER,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.name = "tp-link:white:lan",
|
|
.gpio = TL_MR6400_GPIO_LED_LAN,
|
|
.active_low = 0,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_MR6400_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "rfkill",
|
|
.type = EV_KEY,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_MR6400_GPIO_BTN_RFKILL,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init tl_mr6400_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(&tl_mr6400_flash_data);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
/* LAN1, LAN2, LAN3 */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask |= BIT(0);
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
|
|
ath79_register_eth(1);
|
|
|
|
/* LAN4 / WAN */
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac);
|
|
|
|
ath79_register_leds_gpio(-1,
|
|
ARRAY_SIZE(tl_mr6400_leds_gpio),
|
|
tl_mr6400_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1,
|
|
TL_MR6400_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(tl_mr6400_gpio_keys),
|
|
tl_mr6400_gpio_keys);
|
|
|
|
gpio_request_one(TL_MR6400_GPIO_LTE_POWER,
|
|
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
|
|
"LTE power");
|
|
ath79_register_usb();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400",
|
|
tl_mr6400_setup);
|