4b0eebe9df
ALFA Network N5Q is a successor of previous model, the N5 (outdoor CPE/AP, based on Atheros AR7240 + AR9280). New version is based on Atheros AR9344. Specification: - 550/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100 Mbps Ethernet, with passive PoE support (24 V) - 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm - 8x LED (7 are driven by GPIO) - 1x button (reset) - external h/w watchdog (EM6324QYSP5B, disabled and not used) - header for optional 802.3at/af PoE module - DC jack for main power input (optional, not installed by default) - UART header on PCB Flash instruction: You can use sysupgrade image directly in vendor firmare which is based on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot: 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with one of RJ45 ports, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
133 lines
3.2 KiB
C
133 lines
3.2 KiB
C
/*
|
|
* ALFA Network N5Q board support
|
|
*
|
|
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define N5Q_GPIO_LED_LAN 19
|
|
#define N5Q_GPIO_LED_SIGNAL1 0
|
|
#define N5Q_GPIO_LED_SIGNAL2 1
|
|
#define N5Q_GPIO_LED_SIGNAL3 2
|
|
#define N5Q_GPIO_LED_SIGNAL4 3
|
|
#define N5Q_GPIO_LED_WAN 18
|
|
#define N5Q_GPIO_LED_WLAN 12
|
|
|
|
#define N5Q_GPIO_WDT_EN 16
|
|
#define N5Q_GPIO_WDT_IN 17
|
|
|
|
#define N5Q_GPIO_BTN_RESET 11
|
|
|
|
#define N5Q_MAC0_OFFSET 0
|
|
#define N5Q_MAC1_OFFSET 6
|
|
#define N5Q_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
#define N5Q_KEYS_POLL_INTERVAL 20
|
|
#define N5Q_KEYS_DEBOUNCE_INTERVAL (3 * N5Q_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led n5q_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "n5q:green:lan",
|
|
.gpio = N5Q_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "n5q:red:signal1",
|
|
.gpio = N5Q_GPIO_LED_SIGNAL1,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "n5q:orange:signal2",
|
|
.gpio = N5Q_GPIO_LED_SIGNAL2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "n5q:green:signal3",
|
|
.gpio = N5Q_GPIO_LED_SIGNAL3,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "n5q:green:signal4",
|
|
.gpio = N5Q_GPIO_LED_SIGNAL4,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "n5q:green:wan",
|
|
.gpio = N5Q_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "n5q:green:wlan",
|
|
.gpio = N5Q_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button n5q_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = N5Q_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = N5Q_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init n5q_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1f070000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = 0xf7;
|
|
|
|
/* LAN */
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + N5Q_MAC1_OFFSET, 0);
|
|
ath79_register_eth(1);
|
|
|
|
/* WAN */
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + N5Q_MAC0_OFFSET, 0);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(n5q_leds_gpio),
|
|
n5q_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, N5Q_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(n5q_gpio_keys),
|
|
n5q_gpio_keys);
|
|
|
|
gpio_request_one(N5Q_GPIO_WDT_IN,
|
|
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
|
"WDT input");
|
|
|
|
gpio_request_one(N5Q_GPIO_WDT_EN,
|
|
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
|
"WDT enable");
|
|
|
|
ath79_register_wmac(art + N5Q_WMAC_CALDATA_OFFSET, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_N5Q, "N5Q", "ALFA Network N5Q", n5q_setup);
|