53ef20f65a
Specification: - SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB)) - RAM: 64 MiB DDR2 - Storage: 16 MiB of flash (optional 16 MiB second flash) - Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) 1x100M (port 4) - PCI-E: x1 - SIMcard slot: x1 - USB 2.0 port: x1 (optional) - Ext GPIO pin: x8 - UART for serial console: x1 - External watchdog: x1 (optional) - Power supply: 9-48V (DC jack/passive PoE) Installation through tftp: - Copy <Firmware Image Name> into tftp directory - Connect board via ttl port and Ethernet port - Boot the AP531B0 - When "Autobooting in 1 seconds" appears press Enter - Set serverip and ipaddr appropriate (e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1) - Enter "tftp 0x8050000 <Firmware Image Name>" - Enter "erase 0x9f050000 +$filesize" - Enter "cp.b 0x80500000 0x9f050000 $filesize" - Enter "reset" Signed-off-by: Shuanglin Liu <roboidler@gmail.com>
113 lines
2.7 KiB
C
113 lines
2.7 KiB
C
/*
|
|
* Rockeetech AP531B0 11ng wireless AP board support
|
|
*
|
|
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2016 Shuanglin Liu <roboidler@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
#include "dev-ap9x-pci.h"
|
|
|
|
#define AP531B0_GPIO_LED_WLAN 12
|
|
#define AP531B0_GPIO_LED_STATUS 11
|
|
|
|
#define AP531B0_GPIO_RST_BTN 17
|
|
|
|
#define AP531B0_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define AP531B0_KEYS_DEBOUNCE_INTERVAL (3 * AP531B0_KEYS_POLL_INTERVAL)
|
|
|
|
#define AP531B0_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
|
|
static struct gpio_led ap531b0_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "ap531b0:green:status",
|
|
.gpio = AP531B0_GPIO_LED_STATUS,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "ap531b0:green:wlan",
|
|
.gpio = AP531B0_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button ap531b0_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = AP531B0_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = AP531B0_GPIO_RST_BTN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
|
|
static void __init ap531b0_gpio_led_setup(void)
|
|
{
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap531b0_leds_gpio),
|
|
ap531b0_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, AP531B0_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ap531b0_gpio_keys),
|
|
ap531b0_gpio_keys);
|
|
}
|
|
|
|
static void __init ap531b0_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
u8 *pmac;
|
|
|
|
ath79_register_m25p80(NULL);
|
|
ap531b0_gpio_led_setup();
|
|
ath79_register_usb();
|
|
ath79_register_pci();
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
pmac = art + AP531B0_WMAC_CALDATA_OFFSET + 2;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, pmac, 1);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, pmac, 2);
|
|
|
|
ath79_register_wmac(art + AP531B0_WMAC_CALDATA_OFFSET, pmac);
|
|
|
|
/* WAN port */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_register_eth(0);
|
|
|
|
/* LAN ports */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_switch_data.phy_poll_mask |= BIT(4);
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_AP531B0, "AP531B0", "Rockeetech AP531B0",
|
|
ap531b0_setup);
|