Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau fcc570d999 site: set ac_cv_sizeof_off_t=8 to fix autoconf applications using it for detecting largefile support (#8376 , #5681 ) SVN-Revision: 26471		2011-04-04 12:11:43 +00:00
docs
include	site: set ac_cv_sizeof_off_t=8 to fix autoconf applications using it for detecting largefile support (#8376 , #5681 )	2011-04-04 12:11:43 +00:00
package	uci: mark uci as unsafe for parallel building	2011-04-04 12:06:37 +00:00
scripts	path expansion was broken due to a badly quoted *	2011-04-01 11:07:27 +00:00
target	ramips: initial board support for MOFI3500-3GN	2011-04-04 08:43:07 +00:00
toolchain	make the build system a bit more silent without V=99	2011-04-04 00:54:37 +00:00
tools	make the build system a bit more silent without V=99	2011-04-04 00:54:37 +00:00
.gitignore	gitignore: add .rej and .orig to .gitignore	2011-04-03 18:30:55 +00:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	set TOOLCHAIN_DIR var when using external toolchain	2011-04-02 14:27:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org