b7a8a54542
This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
292 lines
7.3 KiB
Plaintext
292 lines
7.3 KiB
Plaintext
# Copyright (C) 2006-2013 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
menu "Target Images"
|
|
|
|
menuconfig TARGET_ROOTFS_INITRAMFS
|
|
bool "ramdisk"
|
|
default y if USES_INITRAMFS
|
|
help
|
|
Embed the root filesystem into the kernel (initramfs).
|
|
|
|
choice
|
|
prompt "Compression"
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_apm821xx
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ath79_mikrotik
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
|
|
default TARGET_INITRAMFS_COMPRESSION_NONE
|
|
depends on TARGET_ROOTFS_INITRAMFS
|
|
help
|
|
Select ramdisk compression.
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_NONE
|
|
bool "none"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_GZIP
|
|
bool "gzip"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_BZIP2
|
|
bool "bzip2"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_LZMA
|
|
bool "lzma"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_LZO
|
|
bool "lzo"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_LZ4
|
|
bool "lz4"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_XZ
|
|
bool "xz"
|
|
endchoice
|
|
|
|
config EXTERNAL_CPIO
|
|
string
|
|
prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS
|
|
default ""
|
|
help
|
|
Kernel uses specified external cpio as INITRAMFS_SOURCE.
|
|
|
|
config TARGET_INITRAMFS_FORCE
|
|
bool "Force"
|
|
depends on TARGET_ROOTFS_INITRAMFS
|
|
default n
|
|
help
|
|
Ignore the initramfs passed by the bootloader.
|
|
|
|
comment "Root filesystem archives"
|
|
|
|
config TARGET_ROOTFS_CPIOGZ
|
|
bool "cpio.gz"
|
|
default y if USES_CPIOGZ
|
|
help
|
|
Build a compressed cpio archive of the root filesystem.
|
|
|
|
config TARGET_ROOTFS_TARGZ
|
|
bool "tar.gz"
|
|
default y if USES_TARGZ
|
|
help
|
|
Build a compressed tar archive of the root filesystem.
|
|
|
|
comment "Root filesystem images"
|
|
|
|
menuconfig TARGET_ROOTFS_EXT4FS
|
|
bool "ext4"
|
|
default y if USES_EXT4
|
|
help
|
|
Build an ext4 root filesystem.
|
|
|
|
config TARGET_EXT4_RESERVED_PCT
|
|
int "Percentage of reserved blocks in root filesystem"
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
default 0
|
|
help
|
|
Select the percentage of reserved blocks in the root filesystem.
|
|
|
|
choice
|
|
prompt "Root filesystem block size"
|
|
default TARGET_EXT4_BLOCKSIZE_4K
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
help
|
|
Select the block size of the root filesystem.
|
|
|
|
config TARGET_EXT4_BLOCKSIZE_4K
|
|
bool "4k"
|
|
|
|
config TARGET_EXT4_BLOCKSIZE_2K
|
|
bool "2k"
|
|
|
|
config TARGET_EXT4_BLOCKSIZE_1K
|
|
bool "1k"
|
|
endchoice
|
|
|
|
config TARGET_EXT4_BLOCKSIZE
|
|
int
|
|
default 4096 if TARGET_EXT4_BLOCKSIZE_4K
|
|
default 2048 if TARGET_EXT4_BLOCKSIZE_2K
|
|
default 1024 if TARGET_EXT4_BLOCKSIZE_1K
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
|
|
config TARGET_EXT4_JOURNAL
|
|
bool "Create a journaling filesystem"
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
default n
|
|
help
|
|
Create an ext4 filesystem with a journal.
|
|
|
|
config TARGET_ROOTFS_JFFS2
|
|
bool "jffs2"
|
|
depends on USES_JFFS2
|
|
help
|
|
Build a JFFS2 root filesystem.
|
|
|
|
config TARGET_ROOTFS_JFFS2_NAND
|
|
bool "jffs2 for NAND"
|
|
default y if USES_JFFS2_NAND
|
|
depends on USES_JFFS2_NAND
|
|
help
|
|
Build a JFFS2 root filesystem for NAND flash.
|
|
|
|
menuconfig TARGET_ROOTFS_SQUASHFS
|
|
bool "squashfs"
|
|
default y if USES_SQUASHFS
|
|
help
|
|
Build a squashfs-lzma root filesystem.
|
|
|
|
config TARGET_SQUASHFS_BLOCK_SIZE
|
|
int "Block size (in KiB)"
|
|
depends on TARGET_ROOTFS_SQUASHFS
|
|
default 64 if LOW_MEMORY_FOOTPRINT
|
|
default 1024 if (SMALL_FLASH && !LOW_MEMORY_FOOTPRINT)
|
|
default 256
|
|
|
|
menuconfig TARGET_ROOTFS_UBIFS
|
|
bool "ubifs"
|
|
default y if USES_UBIFS
|
|
depends on USES_UBIFS
|
|
help
|
|
Build a UBIFS root filesystem.
|
|
|
|
choice
|
|
prompt "compression"
|
|
default TARGET_UBIFS_COMPRESSION_ZLIB
|
|
depends on TARGET_ROOTFS_UBIFS
|
|
help
|
|
Select compression type
|
|
|
|
config TARGET_UBIFS_COMPRESSION_NONE
|
|
bool "none"
|
|
|
|
config TARGET_UBIFS_COMPRESSION_LZO
|
|
bool "lzo"
|
|
|
|
config TARGET_UBIFS_COMPRESSION_ZLIB
|
|
bool "zlib"
|
|
endchoice
|
|
|
|
config TARGET_UBIFS_FREE_SPACE_FIXUP
|
|
bool "free space fixup" if TARGET_ROOTFS_UBIFS
|
|
default y
|
|
help
|
|
The filesystem free space has to be fixed up on first mount.
|
|
|
|
config TARGET_UBIFS_JOURNAL_SIZE
|
|
string
|
|
prompt "journal size" if TARGET_ROOTFS_UBIFS
|
|
default ""
|
|
|
|
config GRUB_IMAGES
|
|
bool "Build GRUB images (Linux x86 or x86_64 host only)"
|
|
depends on TARGET_x86
|
|
depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
|
|
select PACKAGE_grub2
|
|
default y
|
|
|
|
config GRUB_EFI_IMAGES
|
|
bool "Build GRUB EFI images (Linux x86 or x86_64 host only)"
|
|
depends on TARGET_x86
|
|
depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
|
|
select PACKAGE_grub2
|
|
select PACKAGE_grub2-efi
|
|
select PACKAGE_kmod-fs-vfat
|
|
default y
|
|
|
|
config GRUB_CONSOLE
|
|
bool "Use Console Terminal (in addition to Serial)"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default y
|
|
|
|
config GRUB_SERIAL
|
|
string "Serial port device"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default "ttyS0"
|
|
|
|
config GRUB_BAUDRATE
|
|
int "Serial port baud rate"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default 38400 if TARGET_x86_generic
|
|
default 115200
|
|
|
|
config GRUB_FLOWCONTROL
|
|
bool "Use RTE/CTS on serial console"
|
|
depends on GRUB_SERIAL != ""
|
|
default n
|
|
|
|
config GRUB_BOOTOPTS
|
|
string "Extra kernel boot options"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
help
|
|
If you don't know, just leave it blank.
|
|
|
|
config GRUB_TIMEOUT
|
|
string "Seconds to wait before booting the default entry"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default "5"
|
|
help
|
|
If you don't know, 5 seconds is a reasonable default.
|
|
|
|
config GRUB_TITLE
|
|
string "Title for the menu entry in GRUB"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default "OpenWrt"
|
|
help
|
|
This is the title of the GRUB menu entry.
|
|
If unspecified, it defaults to OpenWrt.
|
|
|
|
config ISO_IMAGES
|
|
bool "Build LiveCD image (ISO)"
|
|
depends on TARGET_x86
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
|
|
config VDI_IMAGES
|
|
bool "Build VirtualBox image files (VDI)"
|
|
depends on TARGET_x86
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
select PACKAGE_kmod-e1000
|
|
|
|
config VMDK_IMAGES
|
|
bool "Build VMware image files (VMDK)"
|
|
depends on TARGET_x86
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
select PACKAGE_kmod-e1000
|
|
|
|
config TARGET_IMAGES_GZIP
|
|
bool "GZip images"
|
|
depends on TARGET_ROOTFS_EXT4FS || TARGET_x86 || TARGET_armvirt || TARGET_malta
|
|
default y
|
|
|
|
comment "Image Options"
|
|
|
|
source "target/linux/*/image/Config.in"
|
|
|
|
config TARGET_KERNEL_PARTSIZE
|
|
int "Kernel partition size (in MB)"
|
|
depends on USES_BOOT_PART
|
|
default 8 if TARGET_apm821xx_sata
|
|
default 64 if TARGET_bcm27xx
|
|
default 16
|
|
|
|
config TARGET_ROOTFS_PARTSIZE
|
|
int "Root filesystem partition size (in MB)"
|
|
depends on USES_ROOTFS_PART || TARGET_ROOTFS_EXT4FS || TARGET_omap || TARGET_rb532 || TARGET_sunxi || TARGET_uml
|
|
default 104
|
|
help
|
|
Select the root filesystem partition size.
|
|
|
|
config TARGET_ROOTFS_PARTNAME
|
|
string "Root partition on target device"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
help
|
|
Override the root partition on the final device. If left empty,
|
|
it will be mounted by PARTUUID which makes the kernel find the
|
|
appropriate disk automatically.
|
|
|
|
endmenu
|