EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
f7e09198fe
Openwrt/package
History
Felix Fietkau f7e09198fe (1/6) bcm57xx: init from diag 
I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11466
2008-06-15 11:09:27 +00:00
..
acx remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
acx-mac80211 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
admswconfig
alsa
aodv-uu
ar7-atm
arptables
b43 Update b43 from compat-wireless-2008-05-26 codebase 2008-06-04 19:47:48 +00:00
base-files system now knows which timezone it is in 2008-06-11 19:59:16 +00:00
br2684ctl
bridge-utils
broadcom-diag (1/6) bcm57xx: init from diag 2008-06-15 11:09:27 +00:00
broadcom-mmc
broadcom-wl
busybox
button-hotplug add button-hotplug driver, will be usable to check status of buttons connected to GPIO lines 2008-06-07 18:25:32 +00:00
comgt
dnsmasq Updated Dnsmasq to 2.42 (#3498) 2008-06-03 15:06:20 +00:00
dropbear
e2fsprogs add a package for the badblocks utility (closes: #3404) 2008-05-11 10:33:34 +00:00
ebtables
fconfig move the fconfig package into trunk 2008-05-27 13:21:12 +00:00
fonera-mp3
fonera-mp3-drv
foxboard-utils
fuse fix fuse: use in-kernel module for 2.6.25+ kernels 2008-05-11 22:27:32 +00:00
gdbserver
gmp
gpioctl more use of the new GPIO_SUPPORT option 2008-05-02 00:30:39 +00:00
grub
gspcav1
hostap-driver
hostap-utils
hostapd Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens. Fixes #3501 2008-06-08 20:19:19 +00:00
hotplug2 move hotplug2 & udevtrigger to base section 2008-04-21 22:31:07 +00:00
i2c-gpio-custom remove the i2c-gpio-custom driver from adm5120, and make it available on all platforms 2008-04-29 17:18:21 +00:00
ifenslave
iproute2 Update iproute2 to version 2.6.25, and fixup patches 2008-05-20 22:17:26 +00:00
ipsec-tools
ipset
iptables netfilter/iptables: enable IMQ on 2.6.25 2008-06-02 19:46:47 +00:00
isakmpd
iw
ixp4xx-microcode generate and install NPE-A ethernet microcode as well 2008-04-26 10:00:04 +00:00
kernel Add syskonnect yukon2 support (#2568) 2008-06-11 15:51:23 +00:00
kexec-tools update version 2008-05-16 18:56:04 +00:00
keynote
libertas
libjson-c
libnl Update libnl to compile on and after 2.6.25 2008-06-04 19:45:46 +00:00
libpcap
libtool
linux-atm
linux-uvc
lua fix liblua symlink installation 2008-05-23 07:09:29 +00:00
mac80211 Remove ssb headers from mac80211 to avoid conflict with in-kernel ones 2008-06-13 21:05:26 +00:00
madwifi another patch fix 2008-06-13 08:56:06 +00:00
mmc_over_gpio more use of the new GPIO_SUPPORT option 2008-05-02 00:30:39 +00:00
mtd
ncurses
nozomi
nvram
nw802-2.4 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
openssl updated OpenSSL to 0.9.8h 2008-05-31 15:52:11 +00:00
openswan
ov51x-jpeg remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
p54 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
pcmcia-cs
ppp make ip-up scripts aware of network settings 2008-06-11 20:03:08 +00:00
pptp ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number 2008-05-03 12:11:35 +00:00
ps3-utils add ps3-dump-bootloader to package install 2008-05-05 21:49:24 +00:00
qc-usb build the kmod-video-quickcam module only if it was selected 2008-04-20 09:49:13 +00:00
qos-scripts
robocfg
rt61 Mark rt61 as 2.6.23 only (#3337) 2008-04-17 17:11:34 +00:00
rt2500 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
rt2570
shfs
spca5xx-le
spca5xx-view
spi-ks8995
strongswan
switch Stopgap compilation fixes for diag and switch under 2.6.25 2008-05-20 22:33:45 +00:00
uci upgrade uci to 0.4.2 - fixes some escaping and library issues 2008-06-04 22:43:26 +00:00
udev add missing udevextras package option - edd_id 2008-05-05 21:58:03 +00:00
util-linux-ng fixed mount path (closes #3464) 2008-05-25 20:03:00 +00:00
w1-gpio-custom import w1-gpio-custom driver from the Squidge (http://squidge.sourceforge.net/) project 2008-04-29 18:31:43 +00:00
wireless-tools
wpa_supplicant add little endian arm wpa_supplicant config file 2008-06-05 17:15:12 +00:00
wrt55agv2-spidevs
yamonenv
zlib
Makefile add a flag "IGNORE_ERRORS", which can be used to ignore build errors in packages 2008-05-07 16:45:00 +00:00