Openwrt

Openwrt build for Asrock G10 Router

Go to file

Steven Barth f565e0598d netifd: Set source IP for DHCP static routes as well Commit ce92f6650bd8a86db04c7a6cbb58e7fdb200a7e6 added source IP support for DHCP default routes. As a side effect of this change the default route could be present twice in netifd (once with source IP set and once with source IP unset) if it was sent by the server in both the router and static route options. Therefore add source IP support as well for static routes as this case was not considered. Additional remove unused parameter type. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> SVN-Revision: 43645		2014-12-12 09:39:07 +00:00
config	packages: fix typo in OpenWrt name	2014-12-07 16:53:30 +00:00
docs
include	kernel: allow specifying kernel images to be copied separately from kernel make command line	2014-12-11 15:29:33 +00:00
package	netifd: Set source IP for DHCP static routes as well	2014-12-12 09:39:07 +00:00
scripts	scripts: use extended-remote for greater compatibility	2014-12-10 15:50:52 +00:00
target	kernel: refresh patches	2014-12-11 23:29:07 +00:00
toolchain	uClibc: fix ptrace header files for powerpc	2014-12-11 14:38:50 +00:00
tools	ramips: generate factory images for Nexx devices	2014-12-07 16:53:22 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	Move telephony feed to github	2014-12-11 10:30:51 +00:00
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org