Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau f21c0cacf8 uClibc: add back a few cflags that were being overwritten, might fix a few segfauls (thx, framer99) SVN-Revision: 24120		2010-11-24 00:30:26 +00:00
docs
include
package	mac80211: improve station mode nullfunc probing	2010-11-23 02:13:54 +00:00
scripts
target	image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.	2010-11-23 20:17:08 +00:00
toolchain	uClibc: add back a few cflags that were being overwritten, might fix a few segfauls (thx, framer99)	2010-11-24 00:30:26 +00:00
tools
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org