Openwrt

History

Rui Salvaterra 3326b5e75c treewide: switch the timer frequency to 100 Hz Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>		2021-04-21 10:31:10 +01:00
..
base-files/etc
be
be64
image
le
le64
config-5.4	treewide: switch the timer frequency to 100 Hz	2021-04-21 10:31:10 +01:00
config-5.10	treewide: switch the timer frequency to 100 Hz	2021-04-21 10:31:10 +01:00
Makefile	malta: support kernel 5.10	2021-03-17 15:35:33 +01:00
README	malta: update MIPS64 ISA to R2	2020-10-11 16:16:24 +02:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -cpu MIPS64R2-generic -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -cpu MIPS64R2-generic -nographic -m 256

and enjoy the system bootin.