Openwrt

Openwrt build for Asrock G10 Router

Go to file

Lars-Peter Clausen f05a30206c Iomega iConnect Wireless platform support This patch adds support for Iomega iConnect Wireless. Leds and wireless card support are still missing. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 23217		2010-10-04 09:19:52 +00:00
docs
include	update 2.6.35.x to 2.6.35.7	2010-10-04 07:42:32 +00:00
package	kernel: Add hwmon-lm63 package	2010-10-04 09:17:42 +00:00
scripts	feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies	2010-10-02 02:37:27 +00:00
target	Iomega iConnect Wireless platform support	2010-10-04 09:19:52 +00:00
toolchain	optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine.	2010-10-03 12:54:07 +00:00
tools	mtd-utils: refresh patches again	2010-10-03 12:15:04 +00:00
.gitignore
BSDmakefile
Config.in	optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine.	2010-10-03 12:54:07 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org