Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich efce764f0e dnsmasq: rework init procedure - cache udhcp check results to speed up subsequent reloads - enable procd file tracking for /var/etc/dnsmasq.conf to only reload service if needed - implement reload action to only restart dnsmasq if /var/etc/dnsmasq.conf actually changed - launch dnsmasq from interface hotplug to avoid race conditions with network bringup Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 39152		2013-12-21 13:31:28 +00:00
config	config: add KERNEL_DYNAMIC_DEBUG option	2013-12-09 11:30:16 +00:00
docs
include	kernel: update kernel 3.10 to 3.10.24	2013-12-15 19:16:30 +00:00
package	dnsmasq: rework init procedure	2013-12-21 13:31:28 +00:00
scripts	scripts/download.pl: prefer the GNU mirror redirect over the primary site (#14603 )	2013-12-13 16:43:07 +00:00
target	ar71xx: allow to use large ethernet frames on AR934x SoCs	2013-12-20 11:41:23 +00:00
toolchain	uClibc: disable sha256 and sha512 for libcrypt - saves about 13k uncompressed in libcrypt	2013-12-16 18:49:10 +00:00
tools	automake: update to 1.11.6	2013-12-17 02:47:13 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
LICENSE
Makefile
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org