Openwrt/target/linux/sunxi/patches-3.14/192-ahci-platform-changes.patch

From a52ae09871d171d6771b4bef2d4c56dd435e740f Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Mon, 20 Jan 2014 16:32:33 +0200
Subject: [PATCH] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI
 controller

Add compatible string "snps,dwc-ahci", which should be used
for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/ata/ahci_platform.c | 1 +
 1 file changed, 1 insertion(+)

--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
 #include "ahci.h"
 
 static void ahci_host_stop(struct ata_host *host);
@@ -147,6 +149,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_
  *	the following order:
  *	1) Regulator
  *	2) Clocks (through ahci_platform_enable_clks)
+ *	3) Phy
  *
  *	If resource enabling fails at any point the previous enabled
  *	resources are disabled in reverse order.
@@ -171,8 +174,23 @@ int ahci_platform_enable_resources(struc
 	if (rc)
 		goto disable_regulator;
 
+	if (hpriv->phy) {
+		rc = phy_init(hpriv->phy);
+		if (rc)
+			goto disable_clks;
+
+		rc = phy_power_on(hpriv->phy);
+		if (rc) {
+			phy_exit(hpriv->phy);
+			goto disable_clks;
+		}
+	}
+
 	return 0;
 
+disable_clks:
+	ahci_platform_disable_clks(hpriv);
+
 disable_regulator:
 	if (hpriv->target_pwr)
 		regulator_disable(hpriv->target_pwr);
@@ -186,14 +204,20 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_r
  *
  *	This function disables all ahci_platform managed resources in
  *	the following order:
- *	1) Clocks (through ahci_platform_disable_clks)
- *	2) Regulator
+ *	1) Phy
+ *	2) Clocks (through ahci_platform_disable_clks)
+ *	3) Regulator
  *
  *	LOCKING:
  *	None.
  */
 void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
 {
+	if (hpriv->phy) {
+		phy_power_off(hpriv->phy);
+		phy_exit(hpriv->phy);
+	}
+
 	ahci_platform_disable_clks(hpriv);
 
 	if (hpriv->target_pwr)
@@ -206,6 +230,11 @@ static void ahci_platform_put_resources(
 	struct ahci_host_priv *hpriv = res;
 	int c;
 
+	if (hpriv->got_runtime_pm) {
+		pm_runtime_put_sync(dev);
+		pm_runtime_disable(dev);
+	}
+
 	for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
 		clk_put(hpriv->clks[c]);
 }
@@ -222,6 +251,7 @@ static void ahci_platform_put_resources(
  *	2) regulator for controlling the targets power (optional)
  *	3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
  *	   or for non devicetree enabled platforms a single clock
+ *	4) phy (optional)
  *
  *	LOCKING:
  *	None.
@@ -283,6 +313,29 @@ struct ahci_host_priv *ahci_platform_get
 		hpriv->clks[i] = clk;
 	}
 
+	hpriv->phy = devm_phy_get(dev, "sata-phy");
+	if (IS_ERR(hpriv->phy)) {
+		rc = PTR_ERR(hpriv->phy);
+		switch (rc) {
+		case -ENODEV:
+		case -ENOSYS:
+			/* continue normally */
+			hpriv->phy = NULL;
+			break;
+
+		case -EPROBE_DEFER:
+			goto err_out;
+
+		default:
+			dev_err(dev, "couldn't get sata-phy\n");
+			goto err_out;
+		}
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+	hpriv->got_runtime_pm = true;
+
 	devres_remove_group(dev, NULL);
 	return hpriv;
 
@@ -592,6 +645,11 @@ int ahci_platform_resume(struct device *
 	if (rc)
 		goto disable_resources;
 
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	return 0;
 
 disable_resources:
@@ -609,6 +667,7 @@ static const struct of_device_id ahci_of
 	{ .compatible = "snps,spear-ahci", },
 	{ .compatible = "snps,exynos5440-ahci", },
 	{ .compatible = "ibm,476gtr-ahci", },
+	{ .compatible = "snps,dwc-ahci", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
 
 #include <linux/clk.h>
 #include <linux/libata.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 
 /* Enclosure Management Control */
@@ -324,8 +325,10 @@ struct ahci_host_priv {
 	u32 			em_loc; /* enclosure management location */
 	u32			em_buf_sz;	/* EM buffer size in byte */
 	u32			em_msg_type;	/* EM message type */
+	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
 	struct regulator	*target_pwr;	/* Optional */
+	struct phy		*phy;		/* If platform uses phy */
 	void			*plat_data;	/* Other platform data */
 	/*
 	 * Optional ahci_start_engine override, if not set this gets set to the
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct de
 
 	/* This magic is from the original code */
 	writel(0, reg_base + AHCI_RWCR);
-	mdelay(5);
+	msleep(5);
 
 	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
 	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct de
 			 (0x7 << 20), (0x3 << 20));
 	sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
 			 (0x1f << 5), (0x19 << 5));
-	mdelay(5);
+	msleep(5);
 
 	sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
 
@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct de
 		udelay(1);
 	} while (1);
 
-	mdelay(15);
+	msleep(15);
 
 	writel(0x7, reg_base + AHCI_RWCR);