Openwrt/package/boot
Sven Eckelmann eaf2e32c12 ath79: Add support for OpenMesh A60
Device specifications:
======================

* Qualcomm/Atheros QCA9558 ver 1 rev 0
* 720/600/240 MHz (CPU/DDR/AHB)
* 128 MB of RAM
* 16 MB of SPI NOR flash
  - 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 3T3R 2.4 GHz Wi-Fi (11n)
* 3T3R 5 GHz Wi-Fi (11ac)
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x ethernet
  - eth0
    + Label: Ethernet 1
    + AR8035 ethernet PHY (RGMII)
    + 10/100/1000 Mbps Ethernet
    + 802.3af POE
    + used as WAN interface
  - eth1
    + Label: Ethernet 2
    + AR8031 ethernet PHY (SGMII)
    + 10/100/1000 Mbps Ethernet
    + used as LAN interface
* 1x USB
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2021-06-05 01:17:11 +02:00
..
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: update to git HEAD 2021-05-08 23:27:38 +01:00
arm-trusted-firmware-mvebu
arm-trusted-firmware-rockchip
arm-trusted-firmware-sunxi sunxi: add support for H6 boards and OrangePiOnePlus 2021-04-11 23:14:55 +02:00
arm-trusted-firmware-tools
at91bootstrap
fconfig
grub2 grub2: disable liblzma dependency 2021-05-21 09:17:59 +01:00
imx-bootlets
kexec-tools kexec-tools: add patch to fix issue with appended DTB and zImage on ARM 2021-05-23 15:11:38 +02:00
kobs-ng
mt7623n-preloader
tfa-layerscape
uboot-at91
uboot-envtools ath79: Add support for OpenMesh A60 2021-06-05 01:17:11 +02:00
uboot-fritz4040
uboot-imx6 uboot-imx6: update BUILD_DEVICES values 2021-05-20 13:45:12 +02:00
uboot-kirkwood
uboot-lantiq
uboot-layerscape
uboot-mediatek uboot-mediaktek: add support for PSTORE and check it on boot 2021-05-08 23:35:38 +01:00
uboot-mvebu
uboot-mxs
uboot-omap
uboot-oxnas
uboot-ramips
uboot-rockchip uboot-rockchip: update to v2021.04 2021-04-20 13:15:45 +02:00
uboot-sunxi uboot-sunxi: update ATF dependencies for 3 boards 2021-04-15 00:24:50 +02:00
uboot-tegra
uboot-zynq