Openwrt/target/linux/brcm63xx/patches-3.10/508-board_hw553.patch
Jonas Gorski 66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00

95 lines
1.7 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1777,6 +1777,83 @@ static struct board_info __initdata boar
.spis = nb4_spi_devices,
.num_spis = ARRAY_SIZE(nb4_spi_devices),
};
+
+static struct board_info __initdata board_HW553 = {
+ .name = "HW553",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .leds = {
+ {
+ .name = "HW553:red:lan",
+ .gpio = 34,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:blue:lan",
+ .gpio = 35,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:red:adsl",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:blue:adsl",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:red:power",
+ .gpio = 5,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+
+ {
+ .name = "HW553:blue:power",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:red:wifi",
+ .gpio = 25,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:red:internetkey",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "HW553:blue:internetkey",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ },
+};
#endif
/*
@@ -1825,6 +1902,7 @@ static const struct board_info __initcon
&board_nb4_ser_r2,
&board_nb4_fxc_r1,
&board_nb4_fxc_r2,
+ &board_HW553,
#endif
};