Openwrt

Openwrt build for Asrock G10 Router

Go to file

Florian Fainelli eaa30e9776 linux-atm: put all packages into their own submenus Now that we package individual tools as well, the list of ATM tools is pretty big to deserve its own submenu. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34504		2012-12-05 14:58:54 +00:00
docs
include	Revert "include/image.mk: call Image/Build/{cpiogz,targz}"	2012-12-04 22:59:05 +00:00
package	linux-atm: put all packages into their own submenus	2012-12-05 14:58:54 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	kernel/3.3: move OHCI and EHCI platform drivers to generic	2012-12-05 14:18:05 +00:00
toolchain	toolchain: use file_copy to install the initial gcc files	2012-12-02 12:20:47 +00:00
tools	tools: e2fsprogs: delete doc/ directory after unpacking to ensure that makeinfo is not invoked	2012-12-02 18:35:39 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space	2012-12-02 13:04:01 +00:00
feeds.conf.default
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README
rules.mk	rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build	2012-12-02 15:15:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org