ad90a42e48
Like in the previous patches for ath79 and ramips, this will remove the "devicename" from LED labels in ipq40xx. The devicename is removed in DTS files and 01_leds, and a migration script is added. While at it, also harmonize capitalization of wlan2G/wlan5G vs. wlan2g/wlan5g. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
338 lines
6.0 KiB
Plaintext
338 lines
6.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
|
/ {
|
|
model = "ZyXEL NBG6617";
|
|
compatible = "zyxel,nbg6617";
|
|
|
|
chosen {
|
|
/*
|
|
* the vendor u-boot adds root and mtdparts cmdline parameters
|
|
* which we don't want... but we have to overwrite them or else
|
|
* the kernel will take them at face value.
|
|
*/
|
|
bootargs-append = " mtdparts= root=31:13";
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &power;
|
|
led-failsafe = &power;
|
|
led-running = &power;
|
|
led-upgrade = &power;
|
|
};
|
|
|
|
soc {
|
|
rng@22000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@90000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-psgmii@98000 {
|
|
status = "okay";
|
|
};
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
usb2@60f8800 {
|
|
status = "okay";
|
|
|
|
dwc3@6000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb2_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb3@8af8800 {
|
|
status = "okay";
|
|
|
|
dwc3@8a00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb3_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
|
|
usb3_port2: port@2 {
|
|
reg = <2>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-switch@c000000 {
|
|
status = "okay";
|
|
};
|
|
|
|
edma@c080000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
wlan {
|
|
label = "wlan";
|
|
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_RFKILL>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
power: power {
|
|
label = "green:power";
|
|
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb {
|
|
label = "green:usb";
|
|
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
|
trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
|
|
linux,default-trigger = "usbport";
|
|
};
|
|
|
|
wlan2g {
|
|
label = "green:wlan2g";
|
|
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan5g {
|
|
label = "green:wlan5g";
|
|
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wps {
|
|
label = "green:wps";
|
|
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
serial_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio60", "gpio61";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
spi_0_pins: spi_0_pinmux {
|
|
mux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio55", "gpio56", "gpio57";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
mux_cs {
|
|
function = "gpio";
|
|
pins = "gpio54";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
led_pins: led_pinmux {
|
|
mux {
|
|
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
|
|
drive-strength = <0x8>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_spi1 { /* BLSP1 QUP1 */
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
|
|
|
mx25l25635f@0 {
|
|
compatible = "mx25l25635f", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
status = "okay";
|
|
m25p,fast-read;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition0@0 {
|
|
label = "SBL1";
|
|
reg = <0x00000000 0x00040000>;
|
|
read-only;
|
|
};
|
|
partition1@40000 {
|
|
label = "MIBIB";
|
|
reg = <0x00040000 0x00020000>;
|
|
read-only;
|
|
};
|
|
partition2@60000 {
|
|
label = "QSEE";
|
|
reg = <0x00060000 0x00060000>;
|
|
read-only;
|
|
};
|
|
partition3@c0000 {
|
|
label = "CDT";
|
|
reg = <0x000c0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
partition4@d0000 {
|
|
label = "DDRPARAMS";
|
|
reg = <0x000d0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
partition5@e0000 {
|
|
label = "APPSBL"; /* u-boot */
|
|
reg = <0x000e0000 0x00080000>;
|
|
/* U-Boot Standalone App "zloader" is located at 0x64000 */
|
|
read-only;
|
|
};
|
|
partition6@160000 {
|
|
label = "APPSBLENV"; /* u-boot env */
|
|
reg = <0x00160000 0x00010000>;
|
|
};
|
|
partition7@170000 {
|
|
/* make a backup of this partition! */
|
|
label = "ART";
|
|
reg = <0x00170000 0x00010000>;
|
|
read-only;
|
|
};
|
|
partition8@180000 {
|
|
label = "kernel";
|
|
reg = <0x00180000 0x00400000>;
|
|
};
|
|
partition9@580000 {
|
|
label = "dualflag";
|
|
reg = <0x00580000 0x00010000>;
|
|
read-only;
|
|
};
|
|
partition10@590000 {
|
|
label = "header";
|
|
reg = <0x00590000 0x00010000>;
|
|
};
|
|
partition11@5a0000 {
|
|
label = "romd";
|
|
reg = <0x005a0000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition12@6a0000 {
|
|
label = "not_root_data";
|
|
/*
|
|
* for some strange reason, someone at ZyXEL
|
|
* had the "great" idea to put the rootfs_data
|
|
* in front of rootfs... Don't do that!
|
|
* As a result this one, full MebiByte remains
|
|
* unused.
|
|
*/
|
|
reg = <0x006a0000 0x00100000>;
|
|
};
|
|
partition13@7a0000 {
|
|
label = "rootfs";
|
|
reg = <0x007a0000 0x01860000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
pinctrl-0 = <&serial_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi0 {
|
|
status = "okay";
|
|
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|