EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Openwrt build for Asrock G10 Router
51,814 Commits 1 Branch 0 Tags 212 MiB
e826b64294
Go to file
Adrian Schmutzler e826b64294 ath79: convert remaining mtd-mac-address cases to nvmem 
Since the nvmem-based approach for retrieving MAC addresses
appears to depend on the addresses being set up after the
partitions, it is no longer possible to keep the MAC address
setup in shared DTSI files while the partitions itself are
set up in DTS files for the individual devices.

In ath79 the firmware partition is typically located somewhere
"in the middle" of the partition table. Thus, it's not trivial
to share the partitions containing MAC address information in
a common DTSI (like we did in some cases on ramips).

In this commit, MAC address setup is thus moved to the relevant
partitions, and in most cases needs to be duplicated. While
the duplication is not really nice, it eventually provides a
cleaner and more tidy setup, making the DTS(I) file
fragmentation a bit more logical. This should also help
with adding new devices, as information is distributed across
less locations.

For consistency, this commit also moves the mtd-cal-data property
"down" together with the MAC address setup, so it's not based
on a partition before the latter is defined either. (This is
only done for those files touched due to nvmem conversion.)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-18 23:46:02 +02:00
.github
config build: create profiles.json per default 2021-06-21 08:12:21 -10:00
include kernel: bump 5.10 to 5.10.59 2021-08-16 20:37:33 +01:00
LICENSES
package bcm27xx-userland: factor out a -dev package 2021-08-18 20:20:13 +02:00
scripts base-files: rename 'sdcard' to 'legacy-sdcard' 2021-08-16 12:22:17 +01:00
target ath79: convert remaining mtd-mac-address cases to nvmem 2021-08-18 23:46:02 +02:00
toolchain toolchain/gcc: switch to version 10 by default 2021-08-18 20:48:53 +03:00
tools firmware-utils: nand_ecc: replace GPL boilerplate with SPDX 2021-08-09 16:08:59 +02:00
.gitattributes
.gitignore .gitignore: ignore any .vscode* file 2021-07-02 09:50:12 -10:00
BSDmakefile
Config.in
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds: management: remove dead and out of project feed 2021-05-01 00:37:15 +02:00
Makefile Revert "build: replace which with Bash command built-in" 2021-03-03 22:51:39 +01:00
README.md README: switch from freenode to oftc 2021-06-12 12:39:35 -10:00
rules.mk build: add ninja build tool and make it available for cmake 2021-06-12 10:46:39 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0