Openwrt/target/linux/ath79/dts
Davide Fioravanti dfb7a4ce5d ath79: add support for Sitecom WLR-8100
Sitecom WLR-8100 v1 002 (marketed as X8 AC1750) is a dual band wireless
router.

Specification:

- Qualcomm Atheros SoC QCA9558
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (Macronix MX25L12845EMI-10G - SPI NOR)
- 5x 10/100/1000 Mbps Ethernet
- 3T3R 2.4 GHz (QCA9558 WMAC)
- 3T3R 5.8 Ghz (QCA9880-BR4A)
- 1x USB 3.0 (Etron EJ168A)
- 1x USB 2.0
- 9x LEDs
- 2x GPIO buttons

Everything working.
Installation and restore procedure tested

Installation
1. Connect to one of LAN (yellow) ethernet ports,
2. Open router configuration interface,
3. Go to Toolbox > Firmware,
4. Browse for OpenWrt factory image with dlf extension and hit Apply,
5. Wait few minutes, after the Power LED will stop blinking, the router
	is ready for configuration.

Restore OEM FW (Linux only)
1. Download OEM FW from website (tested with WLR-8100v1002-firmware-v27.dlf)
2. Compile the FW for this router and locate the "mksenaofw" tool
	in build_dir/host/firmware-utils/bin/ inside the OpenWrt buildroot
3. Execute "mksenaofw -d WLR-8100v1002-firmware-v27.dlf -o WLR-8100v1002-firmware-v27.dlf.out" where:
	WLR-8100v1002-firmware-v27.dlf is the path to the input file
		(use the downloaded file)
	WLR-8100v1002-firmware-v27.dlf.out is the path to the output file
		(you can use the filename you want)
4. Flash the new WLR-8100v1002-firmware-v27.dlf.out file. WARNING: Do not keep settings.

Additional notes.
The original firmware has the following button configuration:
- Press for 2s the 2.4GHz button: WPS for 2.4GHz
- Press for 2s the 5GHz button: WPS for 5GHz
- Press for 15s both 2.4GHz and 5GHz buttons: Reset
I am not able to replicate this behaviour, so I used the following configuration:
- Press the 2.4GHz button: RFKILL (disable/enable every wireless interfaces)
- Press the 5GHz button: Reset

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
2020-03-07 11:02:13 +08:00
..
ar724x.dtsi
ar934x.dtsi ath79: Make upstream ag71xx driver work 2020-02-28 17:50:46 +01:00
ar1022_iodata_wn-ag300dgr.dts
ar1022_sitecom_wlr-7100.dts
ar7100.dtsi
ar7161_adtran_bsap1800-v2.dts
ar7161_adtran_bsap1840.dts
ar7161_adtran_bsap1880.dtsi
ar7161_aruba_ap-105.dts
ar7161_buffalo_wzr-hp-ag300h.dts ath79: also reduce spi-max-frequency for buffalo_wzr-hp-ag300h 2020-02-27 14:56:02 +01:00
ar7161_dlink_dir-825-b1.dts
ar7161_jjplus_ja76pf2.dts
ar7161_netgear_wndr3700-v2.dts ath79: WNDR3700 v1/v2: make u-boot env partition writable 2020-02-04 12:19:52 +01:00
ar7161_netgear_wndr3700.dts ath79: WNDR3700 v1/v2: make u-boot env partition writable 2020-02-04 12:19:52 +01:00
ar7161_netgear_wndr3700.dtsi
ar7161_netgear_wndr3800.dts
ar7161_netgear_wndr3800ch.dts
ar7161_siemens_ws-ap3610.dts ath79: add support for Siemens WS-AP3610 2020-02-16 15:36:29 +01:00
ar7161_ubnt_routerstation-pro.dts
ar7161_ubnt_routerstation.dts
ar7161_ubnt_routerstation.dtsi
ar7240_buffalo_whr-g301n.dts
ar7240_dlink_dir-615-e4.dts
ar7240_netgear_wnr612-v2.dts
ar7240_netgear_wnr612-v2.dtsi
ar7240_netgear_wnr1000-v2.dts
ar7240_on_n150r.dts
ar7240_tplink_tl-wa701nd-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-02-21 13:55:33 +01:00
ar7240_tplink_tl-wa730re-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-02-21 13:55:33 +01:00
ar7240_tplink_tl-wa801nd-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-02-21 13:55:33 +01:00
ar7240_tplink_tl-wa830re-v1.dts ath79: add support for TP-Link TL-WA830RE v1 2020-02-11 14:31:05 +01:00
ar7240_tplink_tl-wa901nd-v1.dts ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1 2020-02-21 13:55:33 +01:00
ar7240_tplink_tl-wa.dtsi ath79: add support for TP-Link TL-WA830RE v1 2020-02-11 14:31:05 +01:00
ar7240_tplink_tl-wr740n-v1.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink_tl-wr740n-v3.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink_tl-wr741-v1.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink_tl-wr841-v5.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink_tl-wr941-v4.dts ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink_tl-wr.dtsi ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240_tplink.dtsi ath79: reorganize DTSI for ar7240 TP-Link devices 2020-02-11 14:30:58 +01:00
ar7240.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
ar7241_netgear_wnr2000-v3.dts
ar7241_netgear_wnr2200-8m.dts
ar7241_netgear_wnr2200-16m.dts
ar7241_netgear_wnr2200.dtsi
ar7241_tplink_tl-mr3x20.dtsi
ar7241_tplink_tl-mr3220-v1.dts
ar7241_tplink_tl-mr3420-v1.dts
ar7241_tplink_tl-wr841-v7.dts
ar7241_tplink_tl-wr842n-v1.dts
ar7241_tplink.dtsi
ar7241_ubnt_airrouter.dts
ar7241_ubnt_bullet-m.dts
ar7241_ubnt_nanostation-loco-m.dts ath79: add support for Ubiquiti Nanostation Loco M (XM) 2020-02-19 23:20:00 +01:00
ar7241_ubnt_nanostation-m.dts
ar7241_ubnt_picostation-m.dts ath79: add support for Ubiquiti Picostation M (XM) 2020-02-19 23:20:09 +01:00
ar7241_ubnt_rocket-m.dts
ar7241_ubnt_unifi.dts
ar7241_ubnt_xm_outdoor.dtsi
ar7241_ubnt_xm.dtsi
ar7241.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
ar7242_avm_fritz300e.dts
ar7242_buffalo_bhr-4grv.dts
ar7242_buffalo_wzr-bhr.dtsi
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
ar7242_buffalo_wzr-hp-g450h.dts
ar7242_tplink_tl-wr2543-v1.dts
ar7242_ubnt_edgeswitch-5xp.dts
ar7242_ubnt_edgeswitch-8xp.dts
ar7242_ubnt_sw.dtsi
ar7242.dtsi
ar9132_tplink_tl-wa901nd-v2.dts ath79: fix TP-Link TL-WA901ND v2 PHY stuck in reset 2020-02-23 16:17:59 +01:00
ar9132_tplink_tl-wr941-v2.dts
ar9132_tplink_tl-wr1043nd-v1.dts
ar9132.dtsi
ar9330_dlink_dir-505.dts
ar9330_glinet_gl-ar150.dts ath79: reduce spi-max-frequency to 50 MHz 2020-02-27 12:14:09 +01:00
ar9330_pqi_air-pen.dts ath79: reduce spi-max-frequency to 50 MHz 2020-02-27 12:14:09 +01:00
ar9330.dtsi ath79: use ar934x-spi for ar933x as well 2020-02-06 22:53:52 +08:00
ar9331_8dev_carambola2.dts ath79: reduce spi-max-frequency to 50 MHz 2020-02-27 12:14:09 +01:00
ar9331_alfa-network_ap121f.dts
ar9331_embeddedwireless_dorin.dts ath79: reduce spi-max-frequency to 50 MHz 2020-02-27 12:14:09 +01:00
ar9331_etactica_eg200.dts
ar9331_glinet_64xx.dtsi ath79: add support for GL.iNet 6408/6416 (GL.iNet V1) 2020-01-29 18:56:04 +01:00
ar9331_glinet_6408.dts ath79: add support for GL.iNet 6408/6416 (GL.iNet V1) 2020-01-29 18:56:04 +01:00
ar9331_glinet_6416.dts ath79: add support for GL.iNet 6408/6416 (GL.iNet V1) 2020-01-29 18:56:04 +01:00
ar9331_pisen_ts-d084.dts
ar9331_pisen_wmm003n.dts
ar9331_tplink_tl-mr10u.dts
ar9331_tplink_tl-mr3020-v1.dts ath79: reduce spi-max-frequency to 50 MHz 2020-02-27 12:14:09 +01:00
ar9331_tplink_tl-mr3040-v2.dts ath79: reduce spi-max-frequency to 50 MHz 2020-02-27 12:14:09 +01:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
ar9331_tplink_tl-wr703n.dts
ar9331_tplink_tl-wr710n-v1.dts
ar9331_tplink_tl-wr740n-v4.dts
ar9331_tplink_tl-wr741nd-v4.dts
ar9331_tplink_tl-wr741nd-v4.dtsi
ar9331.dtsi
ar9341_pcs_cr3000.dts ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
ar9341_pisen_wmb001n.dts
ar9341_tplink_tl-mr3420-v2.dts
ar9341_tplink_tl-wa850re-v1.dts ath79: add support for TP-Link TL-WA850RE v1 2020-01-22 17:18:55 +01:00
ar9341_tplink_tl-wa.dtsi ath79: add support for TP-Link TL-WA850RE v1 2020-01-22 17:18:55 +01:00
ar9341_tplink_tl-wr841-v8.dts
ar9341_tplink_tl-wr842n-v2.dts
ar9341_tplink.dtsi ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2 2020-02-18 21:23:17 +01:00
ar9341.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
ar9342_iodata_etg3-r.dts
ar9342_ubnt_bullet-m-xw.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_lap-120.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_litebeam-ac-gen2.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_nanobeam-ac.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_nanostation-ac-loco.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_nanostation-ac.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_nanostation-loco-m-xw.dts ath79: add missing reset-gpios for NanoStation Loco M (XW) 2020-02-24 20:42:19 +01:00
ar9342_ubnt_nanostation-m-xw.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
ar9342_ubnt_wa.dtsi
ar9342_ubnt_xw.dtsi
ar9344_aerohive_hiveap-121.dts
ar9344_comfast_cf-e120a-v3.dts
ar9344_devolo_magic-2-wifi.dts ath79: add support for Devolo Magic 2 WIFI 2020-03-07 11:02:13 +08:00
ar9344_dlink_dir-8x5.dtsi
ar9344_dlink_dir-825-c1.dts
ar9344_dlink_dir-835-a1.dts
ar9344_netgear_wndr3700-v4.dts
ar9344_netgear_wndr4300.dts
ar9344_netgear_wndr.dtsi
ar9344_ocedo_raccoon.dts
ar9344_pcs_cap324.dts
ar9344_pcs_cr5000.dts
ar9344_qihoo_c301.dts ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
ar9344_teltonika_rut955.dts ath79: add support for Teltonika RUT955 2020-02-21 22:35:12 +01:00
ar9344_tplink_cpe210-v1.dts
ar9344_tplink_cpe220-v2.dts
ar9344_tplink_cpe510-v1.dts
ar9344_tplink_cpe510-v2.dts
ar9344_tplink_cpe510-v3.dts
ar9344_tplink_cpe610-v1.dts
ar9344_tplink_cpe_1port.dtsi
ar9344_tplink_cpe_2port.dtsi
ar9344_tplink_cpe.dtsi
ar9344_tplink_tl-wdr3500-v1.dts
ar9344_tplink_tl-wdr3600-v1.dts
ar9344_tplink_tl-wdr4300-v1-il.dts
ar9344_tplink_tl-wdr4300-v1.dts
ar9344_tplink_tl-wdr4300.dtsi
ar9344_tplink_tl-wdrxxxx.dtsi
ar9344_tplink_wbs210-v2.dts
ar9344_tplink_wbs510-v1.dts
ar9344_tplink_wbs510-v2.dts
ar9344_wd_mynet-n750.dts
ar9344_wd_mynet-wifi-rangeextender.dts
ar9344_winchannel_wb2000.dts
ar9344_zbtlink_zbt-wd323.dts
ar9344.dtsi
ath79.dtsi ath79: Make upstream ag71xx driver work 2020-02-28 17:50:46 +01:00
qca953x_tplink_tl-wr810n.dtsi
qca953x.dtsi ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
qca956x.dtsi ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
qca9531_comfast_cf-e5.dts
qca9531_comfast_cf-e313ac.dts
qca9531_comfast_cf-e314n-v2.dts
qca9531_comfast_cf-e560ac.dts ath79: add support for COMFAST CF-E560AC 2020-02-03 16:18:08 +01:00
qca9531_engenius_ews511ap.dts
qca9531_glinet_gl-ar300m16.dts
qca9531_glinet_gl-ar300m-lite.dts
qca9531_glinet_gl-ar300m-nand.dts
qca9531_glinet_gl-ar300m-nor.dts
qca9531_glinet_gl-ar300m.dtsi ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
qca9531_glinet_gl-ar750.dts
qca9531_glinet_gl-x750.dts
qca9531_tplink_archer-d50-v1.dts
qca9531_tplink_tl-mr6400-v1.dts
qca9531_tplink_tl-wr810n-v1.dts
qca9531_tplink_tl-wr902ac-v1.dts
qca9531_yuncore_a770.dts
qca9533_comfast_cf-e110n-v2.dts
qca9533_tplink_cpe210-v2.dts
qca9533_tplink_cpe210-v3.dts
qca9533_tplink_cpe210.dtsi
qca9533_tplink_cpe220-v3.dts
qca9533_tplink_cpexxx.dtsi
qca9533_tplink_tl-wa850re-v2.dts ath79: add support for TP-Link TL-WA850RE v2 2020-01-22 23:52:51 +01:00
qca9533_tplink_tl-wr810n-v2.dts
qca9533_tplink_tl-wr841-v9.dts
qca9533_tplink_tl-wr841-v10.dts
qca9533_tplink_tl-wr841-v11.dts
qca9533_tplink_tl-wr841-v11.dtsi
qca9533_tplink_tl-wr841-v12.dts
qca9533_tplink_tl-wr841.dtsi
qca9533_tplink_tl-wr842n-v3.dts
qca9533_ubnt_acb-isp.dts
qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts ath79: fix spi-max-frequency for wAP G-5HacT2HnD 2020-02-27 12:14:09 +01:00
qca9557_buffalo_bhr-4grv2.dts
qca9557_iodata_wn-ac1167dgr.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9557_iodata_wn-ac1600dgr.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9557_iodata_wn-ac-dgr.dtsi
qca9557.dtsi ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
qca9558_comfast_cf-wr650ac-v1.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9558_comfast_cf-wr650ac-v2.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9558_comfast_cf-wr650ac.dtsi
qca9558_devolo_dvl1xxx.dtsi ath79: use upstream properties to disable EEE 2020-01-22 22:53:55 +01:00
qca9558_devolo_dvl1200e.dts
qca9558_devolo_dvl1200i.dts
qca9558_devolo_dvl1750c.dts
qca9558_devolo_dvl1750e.dts
qca9558_devolo_dvl1750i.dts
qca9558_devolo_dvl1750x.dts
qca9558_domywifi_dw33d.dts ath79: add support for DomyWifi DW33D 2020-03-07 11:02:13 +08:00
qca9558_engenius_ecb1750.dts ath79: use upstream properties to disable EEE 2020-01-22 22:53:55 +01:00
qca9558_engenius_epg5000.dts
qca9558_librerouter_librerouter-v1.dts
qca9558_mikrotik_routerboard-922uags-5hpacd.dts ath79: add support for MikroTik RouterBOARD 922UAGS-5HPacD 2020-02-26 14:46:46 +01:00
qca9558_netgear_ex6400.dts
qca9558_netgear_ex7300.dts
qca9558_netgear_ex7300.dtsi
qca9558_ocedo_koala.dts ath79: use upstream properties to disable EEE 2020-01-22 22:53:55 +01:00
qca9558_ocedo_ursus.dts
qca9558_openmesh_om5p-ac-v2.dts
qca9558_sitecom_wlr-8100.dts ath79: add support for Sitecom WLR-8100 2020-03-07 11:02:13 +08:00
qca9558_tplink_archer-c5-v1.dts
qca9558_tplink_archer-c7-v1.dts
qca9558_tplink_archer-c7-v2.dts
qca9558_tplink_archer-c.dtsi
qca9558_tplink_re350k-v1.dts ath79: harmonize ethernet-phy naming scheme 2020-01-31 13:40:59 +01:00
qca9558_tplink_re355-v1.dts
qca9558_tplink_re450-v1.dts
qca9558_tplink_rex5x.dtsi ath79: harmonize ethernet-phy naming scheme 2020-01-31 13:40:59 +01:00
qca9558_tplink_tl-wdr4900-v2.dts
qca9558_tplink_tl-wr941n-v7-cn.dts
qca9558_tplink_tl-wr1043nd-v2.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9558_tplink_tl-wr1043nd.dtsi
qca9558_tplink_tl-wr1045nd-v2.dts
qca9558_trendnet_tew-823dru.dts
qca9558_zyxel_nbg6716.dts ath79: harmonize ethernet-phy naming scheme 2020-01-31 13:40:59 +01:00
qca9561_avm_fritz4020.dts ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
qca9561_tplink_archer-c5x.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
qca9561_tplink_archer-c6x.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
qca9561_tplink_archer-c25-v1.dts ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
qca9561_tplink_archer-c58-v1.dts
qca9561_tplink_archer-c59-v1.dts
qca9561_tplink_archer-c59-v2.dts
qca9561_tplink_archer-c60-v1.dts
qca9561_tplink_archer-c60-v2.dts
qca9561_xiaomi_mi-router-4q.dts
qca9563_dlink_dir-842-c1.dts
qca9563_dlink_dir-842-c2.dts
qca9563_dlink_dir-842-c3.dts
qca9563_dlink_dir-842-c.dtsi
qca9563_dlink_dir-859-a1.dts
qca9563_elecom_wrc-300ghbk2-i.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9563_elecom_wrc-1750ghbk2-i.dts ath79: remove redundant includes in DTS files 2020-02-22 19:17:51 +01:00
qca9563_elecom_wrc-ghbk2-i.dtsi
qca9563_glinet_gl-ar750s-nor-nand.dts
qca9563_glinet_gl-ar750s-nor.dts
qca9563_glinet_gl-ar750s.dtsi ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
qca9563_nec_wg800hp.dts
qca9563_nec_wg1200cr.dts
qca9563_netgear_wndr4300-v2.dts
qca9563_netgear_wndr4500-v3.dts
qca9563_netgear_wndr.dtsi ath79: add new ar934x spi driver 2020-02-06 22:53:03 +08:00
qca9563_phicomm_k2t.dts
qca9563_rosinson_wr818.dts
qca9563_tplink_archer-a7-v5.dts
qca9563_tplink_archer-c2-v3.dts
qca9563_tplink_archer-c6-v2-us.dts
qca9563_tplink_archer-c6-v2.dts
qca9563_tplink_archer-c7-v4.dts
qca9563_tplink_archer-c7-v5.dts
qca9563_tplink_archer-x6-v2.dtsi
qca9563_tplink_archer-x7-v5.dtsi
qca9563_tplink_re450-v2.dts ath79: harmonize ethernet-phy naming scheme 2020-01-31 13:40:59 +01:00
qca9563_tplink_tl-wr1043n-v5.dts
qca9563_tplink_tl-wr1043n.dtsi
qca9563_tplink_tl-wr1043nd-v4.dts
qca9563_ubnt_unifiac-lite.dts
qca9563_ubnt_unifiac-lite.dtsi
qca9563_ubnt_unifiac-lr.dts
qca9563_ubnt_unifiac-mesh-pro.dts
qca9563_ubnt_unifiac-mesh.dts
qca9563_ubnt_unifiac-pro.dts
qca9563_ubnt_unifiac-pro.dtsi
qca9563_ubnt_unifiac.dtsi
qca9563_yuncore_a782.dts
qca9563_yuncore_xd4200.dts
qca9563_yuncore_xd4200.dtsi
tp9343_tplink_tl-wr94x.dtsi ath79: do not set inherited phy-mode/status properties again 2020-01-31 13:42:12 +01:00
tp9343_tplink_tl-wr940n-v3.dts
tp9343_tplink_tl-wr940n-v3.dtsi
tp9343_tplink_tl-wr940n-v4.dts
tp9343_tplink_tl-wr940n-v6.dts ath79: add support for TP-Link TL-WR940N v6 2020-02-13 17:33:20 +01:00
tp9343_tplink_tl-wr941nd-v6.dts