Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting The GPIO buttons of ARV752DPW are active low. Treating them as active high caused a reboot loop as a reset-button press is detected by gpio-button-hotplug/gpio-keys-polled on startup. This fixes: https://dev.openwrt.org/ticket/12642 Signed-off-by: Rafael Gieschke <rafael@gieschke.de> SVN-Revision: 36783		2013-05-30 16:01:06 +00:00
docs
include	build: clean up stale files from a previous build when installing a package build to the staging dir	2013-05-29 10:31:45 +00:00
package	procd: update to latest git revision	2013-05-30 16:00:06 +00:00
scripts	feeds: fix check for core packages that are not in the package/ toplevel directory	2013-05-29 18:17:07 +00:00
target	lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting	2013-05-30 16:01:06 +00:00
toolchain	gcc: remove version 4.7	2013-05-23 10:22:09 +00:00
tools
.gitattributes
.gitignore
BSDmakefile
Config.in	Config.in: expose symbols specific to lxc in separate item	2013-05-17 11:27:20 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues	2013-05-09 20:50:49 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org