Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> SVN-Revision: 23129		2010-09-27 14:43:34 +00:00
docs
include	fix build dependencies on packages with multiple variants but no selected virtual packages	2010-09-20 20:17:28 +00:00
package	package/dropbear: simplify & reduce init script size (closes #7985 )	2010-09-24 15:57:53 +00:00
scripts	fix build dependencies on packages with multiple variants but no selected virtual packages	2010-09-20 20:17:28 +00:00
target	ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)	2010-09-27 14:43:34 +00:00
toolchain	gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size	2010-09-20 20:49:34 +00:00
tools	mtd-utils: revert r23075	2010-09-15 23:50:31 +00:00
.gitignore
BSDmakefile
Config.in	Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures.	2010-09-15 16:27:02 +00:00
feeds.conf.default
LICENSE
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README
rules.mk	drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org