Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau e52b720870 gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically SVN-Revision: 25952		2011-03-08 13:10:11 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	site: cache ac_cv_func_malloc_0_nonnull and ac_cv_func_realloc_0_nonnull	2011-03-08 06:00:56 +00:00
package	gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically	2011-03-08 13:10:11 +00:00
scripts	base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs	2011-03-01 05:40:38 +00:00
target	n810: Add workaround for bluetooth IRQ issue	2011-03-07 16:57:15 +00:00
toolchain	gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically	2011-03-08 13:10:11 +00:00
tools	bison: fix compilation with stub intl header	2011-03-04 20:37:15 +00:00
.gitignore
BSDmakefile
Config.in	fix wrong copy&paste in the helptext for kernel AIO support	2011-02-27 20:06:05 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	only support EABI on ARM targets	2011-03-07 12:59:19 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org