John Crispin e33aa71045 lantiq: TDW89x0 - increase spi frequency ... Use the same max spi frequency as set in u-boot. According to the datasheets, the Q64-104HIP as well as the Winbond 25Q64FVSIG support spi frequencies up to 50 MHz. During my tests, the Q64-104HIP couldn't be recognized/initialized if the frequency was > 40MHz. Both chips do support fast read as well. While touching the dts file, I fixed the dtc compiler warnings. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47994		2015-12-23 18:24:56 +00:00
..
adm5120
adm8668
ar7
ar71xx	ar71xx: Update preinit script for new ath10k firmware	2015-12-23 14:45:30 +00:00
arc770
arm64
at91
ath25
au1000
bcm53xx	bcm53xx: print bcm47xxpart buf to debug R8000 UBI problem	2015-12-16 09:37:16 +00:00
brcm47xx	brcm47xx: fix switch config for devices with WAN port 0	2015-12-18 15:27:16 +00:00
brcm63xx
brcm2708	brcm2708: update 4.1 patches	2015-12-17 09:29:22 +00:00
cns3xxx	cns3xxx: add GW2393 Support	2015-12-17 09:28:42 +00:00
gemini
generic	ledtrig-netdev: reset link status & stats after changing device_name	2015-12-23 17:11:49 +00:00
imx6
ipq806x
ixp4xx
kirkwood
lantiq	lantiq: TDW89x0 - increase spi frequency	2015-12-23 18:24:56 +00:00
malta
mcs814x
mediatek
mpc85xx
mvebu	generic/4.4: bump to -rc5	2015-12-15 11:20:38 +00:00
mxs
netlogic
octeon
omap	omap: add kernel 4.4	2015-12-17 09:29:48 +00:00
omap24xx
orion
oxnas
ppc40x
ppc44x
pxa
ramips	ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devices	2015-12-19 11:07:29 +00:00
rb532	rb532: switch to 4.1	2015-12-23 14:43:11 +00:00
realview
sunxi
uml
x86
xburst
Makefile