Florian Fainelli c6d9ec5173 multiple SPI driver fixes ... - fix platform device registration - fix chipselect, command register defines, add missing clock - make slave select proper - fix multibytes transferts Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> SVN-Revision: 24849		2010-12-29 16:19:59 +00:00
..
007-usb-ohci-support.patch
008-usb-ehci-support.patch
010-add_bcm63xx_ohci_controller.patch
011-add_bcm63xx_ehci_controller.patch
020-watchdog.patch
040-bcm963xx_flashmap.patch	patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).	2010-12-28 08:10:32 +00:00
070_bcm63xx_enet_vlan_incoming_fixed.patch
100-reset_buttons.patch
110-gpiodev.patch
120-spi-bitbang-norxtx-support.patch
121-spi-gpio-norxtx-support.patch
141-led_count.patch	patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.	2010-12-07 17:32:29 +00:00
150-alice_gate2_leds.patch
170-board_livebox.patch
180-udc_preliminary_support.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
200-extended-platform-devices.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
200-spi-board-info.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
211-gen-74x164-gpio-chip-driver.patch
220-board-D4PW.patch
221-board-NB4.patch
240-spi.patch	multiple SPI driver fixes	2010-12-29 16:19:59 +00:00
250-6358-enet1-external-mii-clk.patch
260-no_ehci_over_current_check.patch
270-board-96338W2_E7T.patch
300-wl_exports.patch
310-CPVA642_board.patch
400-board_96358gw.patch
410-boardid_fixup.patch
420-board_spw500v.patch
430-board_gw6200_gw6000.patch	boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.	2010-12-07 15:15:54 +00:00
440-new_96348gw-11_leds.patch	Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.	2010-12-10 18:59:58 +00:00