Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich df57b8dcb6 opkg: switch to git repository (#14655 ) Upstream development now takes place in a git repository which was clone from the old svn repository. Switch the source location to the git tree using the commit that corresponds to the old svn r618 revision. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 39153		2013-12-21 13:47:46 +00:00
config	config: add KERNEL_DYNAMIC_DEBUG option	2013-12-09 11:30:16 +00:00
docs
include	kernel: update kernel 3.10 to 3.10.24	2013-12-15 19:16:30 +00:00
package	opkg: switch to git repository (#14655 )	2013-12-21 13:47:46 +00:00
scripts	scripts/download.pl: prefer the GNU mirror redirect over the primary site (#14603 )	2013-12-13 16:43:07 +00:00
target	ar71xx: allow to use large ethernet frames on AR934x SoCs	2013-12-20 11:41:23 +00:00
toolchain	uClibc: disable sha256 and sha512 for libcrypt - saves about 13k uncompressed in libcrypt	2013-12-16 18:49:10 +00:00
tools	automake: update to 1.11.6	2013-12-17 02:47:13 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org