Openwrt build for Asrock G10 Router
Go to file
Jo-Philipp Wich de51f6022f netifd: fix handling of "lookup main" for ip rules (#15315)
Reworks the handling of RT_TABLE_MAIN in system-linux.c so that ip rules
with lookup main can be properly setup.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41282
2014-06-20 09:58:16 +00:00
config Disable crashlog for UML 2014-06-12 11:34:44 +00:00
docs
include include/target.mk: add CPU_CFLAGS_octeon 2014-06-18 10:07:49 +00:00
package netifd: fix handling of "lookup main" for ip rules (#15315) 2014-06-20 09:58:16 +00:00
scripts scripts/metadata.pl: avoid adding depends and select for the same symbol 2014-06-12 14:35:09 +00:00
target imx6: add sysupgrade support 2014-06-19 14:13:38 +00:00
toolchain toolchain: make the default eglibc selection work even if TOOLCHAINOPTS is not enabled 2014-06-19 14:13:16 +00:00
tools lantiq: DGN3500 (all known variants) factory and sysupgrade image building support 2014-06-17 15:38:54 +00:00
.gitattributes
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in
feeds.conf.default feeds.conf.default: add management feed 2014-06-12 15:08:08 +00:00
LICENSE
Makefile build: remove duplicate variable definitions 2014-03-21 15:54:11 +00:00
README
rules.mk partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk" 2014-03-22 19:52:48 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org