Openwrt/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c
Gabor Juhos b49dc036e8 ar71xx: TEW632BRP has buttons 'active low', fix board config
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37569
2013-07-28 10:23:22 +00:00

112 lines
3.0 KiB
C

/*
* TrendNET TEW-632BRP board support
*
* Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <asm/mach-ath79/ath79.h>
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "nvram.h"
#define TEW_632BRP_GPIO_LED_STATUS 1
#define TEW_632BRP_GPIO_LED_WPS 3
#define TEW_632BRP_GPIO_LED_WLAN 6
#define TEW_632BRP_GPIO_BTN_WPS 12
#define TEW_632BRP_GPIO_BTN_RESET 21
#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */
#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
#define TEW_632BRP_CONFIG_ADDR 0x1f020000
#define TEW_632BRP_CONFIG_SIZE 0x10000
static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
{
.name = "tew-632brp:green:status",
.gpio = TEW_632BRP_GPIO_LED_STATUS,
.active_low = 1,
}, {
.name = "tew-632brp:blue:wps",
.gpio = TEW_632BRP_GPIO_LED_WPS,
.active_low = 1,
}, {
.name = "tew-632brp:green:wlan",
.gpio = TEW_632BRP_GPIO_LED_WLAN,
.active_low = 1,
}
};
static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
.gpio = TEW_632BRP_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
.gpio = TEW_632BRP_GPIO_BTN_WPS,
.active_low = 1,
}
};
#define TEW_632BRP_LAN_PHYMASK BIT(0)
#define TEW_632BRP_WAN_PHYMASK BIT(4)
#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \
TEW_632BRP_WAN_PHYMASK))
static void __init tew_632brp_setup(void)
{
const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
u8 mac[6];
u8 *wlan_mac = NULL;
if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
"lan_mac=", mac) == 0) {
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
wlan_mac = mac;
}
ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
ath79_register_eth(0);
ath79_register_eth(1);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
tew_632brp_leds_gpio);
ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tew_632brp_gpio_keys),
tew_632brp_gpio_keys);
ath79_register_wmac(eeprom, wlan_mac);
}
MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
tew_632brp_setup);