Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau dd86bc73fb tools: Fix compilation on x32 host Compiling the host tools on the new x32 architecture (which is an ILP32 ELF32 system on an amd64 CPU) fails for various reasons. gmp: pull same fix I applied to OpenADK, which was inspired by the fix in the Debian source package mtd-utils: write a workaround myself; only affects x32, but the use of llseek is dangerous according to the manpage, so the guard ifdef should probably go away findutils: pull fix straight from the Debian source packae Signed-off-by: Thorsten Glaser <tg@mirbsd.org> SVN-Revision: 43060		2014-10-25 16:57:16 +00:00
config
docs
include	kernel: update 3.10.49 to 3.10.58 (released 2014-oct-15)	2014-10-24 20:39:26 +00:00
package	hostapd: update to 2014-10-25	2014-10-25 16:48:45 +00:00
scripts	scripts: fix wrong usage of '==' operator	2014-10-14 12:21:11 +00:00
target	ar71xx: refresh 3.10 patches	2014-10-24 20:39:42 +00:00
toolchain	toolchain: fix mips64 musl linker names	2014-10-24 00:15:58 +00:00
tools	tools: Fix compilation on x32 host	2014-10-25 16:57:16 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README
rules.mk	rules.mk: reduce shexport to one line to allow it to be put in a target context	2014-10-22 08:57:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org