Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau da951bad66 ead: allow the client to override the source ip of the server, so that it can work with route filtering properly SVN-Revision: 13883		2009-01-06 14:08:07 +00:00
docs	Make the doc slightly more complete and add notes on how to add a new target in OpenWrt, some serial console and JTAG tips and tricks	2009-01-06 09:20:14 +00:00
include	add MD5 for the kernel 2.6.28	2008-12-25 17:09:30 +00:00
package	ead: allow the client to override the source ip of the server, so that it can work with route filtering properly	2009-01-06 14:08:07 +00:00
scripts	If a package is part of a virtual dependency and also listed as a normal dependency ensure that the dependency is always unconditional. Such a case happens if for example a package has a build dependency and the build dependency provides a virtual install dependency of the package.	2009-01-05 20:02:59 +00:00
target	Prevent crypto aead from failing to build with 2.6.24 targets (#4426 )	2009-01-06 11:28:00 +00:00
toolchain	general fixes for openwrt with kernel 2.6.28	2009-01-05 14:46:18 +00:00
tools	firmware-utils/mkfwimage: fix root_start values	2009-01-05 12:35:51 +00:00
.gitignore
BSDmakefile
Config.in	Adds support for using a local clone of a git tree	2008-10-10 10:07:45 +00:00
feeds.conf.default	Switched LuCI-SVN to another server	2008-10-16 14:57:50 +00:00
LICENSE
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org